Okay, it was late the other night and I was tired. I backed up my 2021 Ram 2500 and heard the truck hit something. “Crap” I thought as I remembered my Western plow was disconnected and sitting on the ground in the area where I was backing up. Well, I hoped I had just nudged the plow frame with my rear bumper but when I got out, it turned out that one of the lights on the plow frame had busted out a golf ball sized part of the passenger side red brake light lens – it was a good thing I was going slow at least but what to do?
Well, first I have to tell you I felt pretty stupid. I literally forgot the plow was back there but then my next thought was “how do I fix this?” It was about 11:15 at night, 9 degrees out and snowing. If there’s one thing I have learned about myself, it’s that my patience is gone when I am tired and that was the not the time to try and fix something. I didn’t want the light assembly to get a ton of snow in it so I just lightly stuck some duct tape on it and work on it the next day.
Looking For A Quick and Easy Fix
First thing I did was to get online and order a new right side tail light assembly (68361714AD for my Tradesman) and that will take some time to come arrive – I literally ordered it yesterday morning and am waiting as I write this. At any rate, I needed to apply a temporary fix to the busted lens. In college, I’d used a red self-adhesive tape to “patch” a busted brake light. I figured I would do something similar because I wanted the lens closed and also you can get a ticket for having either a white light showing from a brake light or an inoperable light. The other thing was given the weather and supply chain problems these days, I wasn’t sure how long I would be waiting for the replacement light assembly so off to Autozone I went.
Autozone carries two type of repair kits both from 3M – one was a roll of red colored translucent tape ($4.99) and the other was a semi-rigid red translucent film ($8.99). I opted for the latter because I could cover the hole without seams and figured it would blend in a lot better. Now I have not used the 3M tape but the one I used in college 30+ years ago faded in the sun and didn’t stick to red hot so I just wasn’t that gung ho on it but I will tell you that my general experience with 3M is that they turn out top notch stuff so I am sure it would have been better but I went with the film and not the tape.
3M High-Strength Red Lens Repair Film 03441
The package has a 3.75×7.75″ piece of thick red film. It’s stiff but it will bend and 3M says it measures about 6-6.5 mils (1 mil =1,000th of an inch) thick. For example, if a credit card is around .03 inches thick, it measures 30 mils to give you an idea.
As you can see in the photos, it was snowing and 16 degrees out when I did the repair. I cleaned the lens real quick with 409 – a general purpose cleaner. I then wiped it dry and brought over the film and a pair of scissors.
The break in the lens had a slight curve so I worked the material around in my hands to get the basic curve I needed and trimmed the material so it could sit flat on the surface. I then removed the rear backing materials and kept pressure on it while working out air bubbles. I figured it might need the heat of my hands to both stay bent and to bond so I did this for 1-2 minutes. For some reason, after I applied the patch was when it dawned on me that I did not take a photo of the hole – why? I have no idea.
I’m surprisingly happy. I didn’t know for sure if it would work but it’s holding up just fine and from a distance you wouldn’t even know it is there.
If things change, I’ll be sure to post an update but so far, so good.
2/19/22: Still holding up just fine. Nothing has changed at all – adhesion and color are just fine. I’m still waiting on the Mopar parts dealer to send me the tail light assembly. Thanks to the film I’m not in a rush and it looks just fine from a few feet away – you wouldn’t even know it is there.
Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at firstname.lastname@example.org. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.