The Galil rifles have always fascinated me. Israel designed and adopted them following the disappointing performance of FAL rifles in the desert. The history is pretty interesting and Ian McCollum of Forgotten Weapons gives you a brief overview in this video.
To learn more, check out these additional resources:
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
Until I watched this video, I’d only seen the very unique Hungarian AMP-69 in books. Ian McCollum did one of his impeccable reviews of this very interesting AK. He calls it the ugliest AK he’s ever seen but I think it’s pretty cool.
One of my first AKs was an AMD-65 it ran like a top. Like the Yugoslavs, the Hungarians had no issues with producing some very uniquely designed rifles based off the Kalashnikov design.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
Two Rivers Arms recently built a Yugo M76 8mm designated marksman’s rifle for me. I’ve wanted one for years and it was a long but worthwhile wait until it arrived. So, once Tim called and said it was almost ready, I started reading up in earnest and watching videos as well.
That’s where Ian McCollum of Forgotten Weapons enters in. I am a fan of Ian at Forgotten Weapons and both subscribe to his Youtube channel and support him via Patreon. Ian published a video of him using a Yugo M76, or as it is formally known, a Zastava M76, in a 2-Gun match. It’s a quick fun watch to see Ian swinging around the big rifle.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
While R&D started ear;lier, prototype Ratnik kits for the first generation components were delivered in 2013. Firearms, optics, communication, navigation, uniform, load bearing and body armor elements were accepted into service on October 23, 2014. Approximate 200,000 sets were delivered by September 2017, and 100% adoption is estimated in 2020 of the Ratnik-2 system. Ratnik-3 hasn’t been released yet but the suit will include a powered exoskeleton to improve strength, speed and stamina.
Overall, what you are seeing is a concerted move away from the Soviet doctrine of volumes of relative untrained and marginally equipped armed forces personnel (all branches exclude Spetsnaz) to that of a professional modern force of trained and well equipped soldiers.
Soldier with an AK-12 rifle with a blank firing adapter. He is wearing a 6B45 ballistic vest, 6sh117 lightweight individual carrying equipment, and, 6B47 helmet. Soldier with an AK-12 rifle with a blank firing adapter. He is wearing a 6B45 ballistic vest, 6sh117 lightweight individual carrying equipment, and, 6B47 helmet. 6B50 Protective goggles, 6B51 knee and elbow pads were part of Ratnik also.Better view of the 76B47 helpes with covers and the 6B50 eye goggles.This is the 6B46 tactical vestImproved communications capabilities.
The Videos
The following video is in Russian but affords the viewer a really good opportunity to see the Ratnik-1 and -2 equipment first hand.
The following is a brief video showing Russian Paratroopers doing drills in Pskov.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
Please note that any images shown were extracted from the videos and remain the property of their respective owner(s).
If you haven’t heard about Polymer80, they have come out with a really straight forward way to make a pistol using Glock parts. You aren’t going to really save money but you are going to have a very cool end result that you can customize however you want.
In surfing around, I came across two videos that have some pretty good camera angles and commentary about guys drilling the holes and filing down the frames that I thought I would share:
Polymer80 is offering some really innovative products. These are not hacks by any means. I like the grip angle, the texture and the finger groove built into the trigger guard. The whole concept is well executed for guys who like building their own firearms.
Note, Polymer80 products are being sold by a ton of vendors so shop around and watch for sales.
The following book is very good and I referred to it constantly during my first build along with the above-mentioned Polymer80 guidance:
Our Polymer80 Barrel Block Sanding Kit
We have a sanding toolkit to help you quickly and accurately clear out the barrel block area.
We have a sanding kit available for Polymer80 pistol builders that is designed to help you quickly and accurately sand the barrel block area so you can have a smooth functioning pistol. Click here to learn more.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
Please note that any images shown were extracted from the videos and remain the property of their respective owner(s).
In the previous post, I told you about my finding Gunstreamer for firearms videos. What brought me there was that I was searching on Google for Polymer80 build videos.
On Gunstreamer I found this great video of a guy, who is obviously experienced in building Glock pistols, showing a build on a Polymer 80 Pf940V2 80% frame. He steps you through what needs to be done in terms of sanding, filing and drilling with the supplied jig and then he goes on to actually assembling the pistol.
I learned a lot watching the video – he has a solid informative style and shows you what he is doing.
Here’s the Video
Our Polymer80 Barrel Block Sanding Kit
We have a sanding toolkit to help you quickly and accurately clear out the barrel block area.
We have a sanding kit available for Polymer80 pistol builders that is designed to help you quickly and accurately sand the barrel block area so you can have a smooth functioning pistol. Click here to learn more.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
Please note that all images were extracted from the video and remain the property of their respective owner(s).
Folks, if you are like me and are sick and tired of the assault by liberals on our second amendment freedoms, you are always looking for sources of firearms advice. Youtube used to be a great source for videos on firearms – everything from reviews, to gunsmithing to build-it-yourself (BIY) guidance. Unfortunately, that is no longer the case – Youtube has turned anti-gun also and I resent it.
So, where can you see videos about firearms? One promising source is Gunstreamer – http://www.gunstreamer.com. I’ve watched a few videos there now and find the site easy to navigate and there are definitely some quality videos showing up there. Definitely check them out and consider supporting them – I am.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
As you know, I tend towards modern military arms but I also have a deep appreciation of craftsmenship and history. While surfing the web one day, I happened across a video about “gunmaking craftsmanship” at Holland & Holland (H&H). It was probably in the mid- to late-1980s when I encountered my first H&H double rifle and it was a functional work of art and I have seen more over the years. So, I added the video to my list of things to watch.
H&H was founded in London in 1835 by Harris Holland and he started manufacturing sometime in the 1850s. His nephew, Henry William Holland, joined in 1860 and became a partner in 1876 leading to the Holland & Holland name we know. (Click here to visit their website’s history page.)
Today, H&H continues the firearm craftsmanship of fine hunting arms – that is their niche. When you watch the video, you will see some automation, such as in the machining of the action, but you will see a tremendous about of handwork. What they turn out are absolutely stunning firearms.
The video steps you through barrel making, the stock, fitting and finishing. It’s really neat to watch them at work. If you appreciate fine arms, you really need to watch.
Here’s the Video
Please note that all images are extracted from the video and remain the property of their respective owner(s).
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
