Assembling a Beryl-ish AK From a WBP Kit – Part 1

It’s been a couple of years since I last had time to build an AK and definitely felt the need to catch up. Contrary to what some may think, the majority of guys who like building guns aren’t trying to bypass laws – they genuinely enjoy it. Think of it as being similar to building a model but this one can go “bang” 🙂

I think I got bit by the AK builder bug in 2006 after reading an article in Shotgun News by Steven Matthews about building AKs. The rest, as they say, is history. At the time, you could buy a kit for $50 if you shopped around then after the barrel ban went into effect, the prices just went up and up. Now, with the advent of US and foreign barrels plus businesses that are selling kits with headspaced barrel assemblies, prices are relatively affordable. They are still far higher than years ago, but you can build your own entry level AK for about $500 and then the prices just go up and up.

At this point I have to answer the question “Why do it when you can buy a complete AK rifle for the same amount or less?” In short, you get to control as much of the quality as you want is the answer. Like anything, someone can always figure out how to make an AK cheaper but that doesn’t mean better. Frankly, some of the US-made AKs are total pieces of shit if you will pardon my French and complete honesty. The internet abounds with stories of busted US made parts and hack assembly jobs. Really, the only AKs I would recommend are going to come from custom or semi-custom shops like Two Rivers Arms, Jim Fuller’s Rifle Dynamics, Jim Roberts, Krebs and so forth.

Certainly there are good foreign made AKs but even they can have quality control moments. Zastava can make excellent AKs if they choose to is one example. Russian Molots are my all time favorite but they are banned from further import though there seems to be a ton of them still for sale and prices haven’t gone up much. Bulgarian AKs can be good and that is one reason K-Var can charge what they do. One country with a long AK history that not all American’s know about is Poland. It would be cool if they start selling more models into the US- market but at least Arms of America is bringing in a wide variety of kits right now.

So that brings me full circle. Why do I want to build vs. buy? Because I like building them and I can make an AK do just about anything I want it to at this point. I’ve done rivet, screw and weld builds. I’ve built Romanian, Hungarian, Polish and Yugoslavian AKs and RPKs. I’ve done traditional looking builds and over-the-top “tacticool mall ninja this thing is way too heavy” builds. Seriously, I kind of went nuts with a Hungarian AMD-65 about 10 years ago and put on a quad rail with a red dot, laser, light vertical fore grip and bipod. The thing was so heavy that it literally taught me that just because you can add something on does not mean you should – it takes time and energy to bring something that heavy up into position and also to stop it once on target.

I’m not saying I know everything. I’m just saying I know my way around the AK platform well enough to build what I want. The hardest thing for me is finding the time between my day job, family and Ronin’s Grips. So, an interesting opportunity presented itself because I had Polish Beryl furniture, Childers Guns sells Polish receivers and Arms of America (AoA) had a cool kit for sale. It was a WBP 7.62×39 kit with a Polish chrome-lined Cold Hammer Forged (CHF) barrel that is arguably, and it will start arguments, one of the best AKM-style barrels you can buy right now. The kit included a solid-steel Bery-style optics rail that goes over the dust cover and for about $670. This appealed to me because I already owned the Beryl handguards, was getting ready to release our version of the modern Beryl grip and, separately, AofA was selling a collapsing Beryl stock that is a unique looking beast for sure.

So, I got the wheels in motion and ordered the kit stock plus some translucent WBP mags from AoA, a RRD-4C brake from JMac customs, an ALG trigger and a Vortex Crossfire Red Dot. I ordered a completed 100% receiver from Childers Guns and had it sent to my FFL and good friend, Scott Igert, of Modern Antique Firearms.

Close-up of AK rifle with M92 PAP muzzle cap, ready for detent pin installation

Close-up of AK rifle with M92 PAP muzzle cap, ready for detent pin installation

M92 PAP muzzle cap and detent pin installation

Once it all arrived, it was time to start.



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



M1A1 75mm Pack Howitzer on an M8 Carriage in the Battle Creek Memorial Cemetary

One of the things I wanted to do for a long time is start taking photos of war memorials and the hardware that is often there. In the Battle Creek, MI, Memorial cemetery is this M1A1 75mm pack howitzer with an M8 carriage.

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

My dad always told me was a pack howitzer and I never really ask him what that meant other than him telling me it was mobile. In Reading, it is interesting because it was to be carried by 7 mules if necessary as well as dropped out of airplanes via 9 parachute loads or whatever the case may be. In short, it would break down into component parts and could be packed somewhere. At 1,436 pounds, it weighed a fair amount when assembled.

As you can see in the next photo of the howitzer’s breach area, it is an M1A1 made by General Electric in 1943. 2,592 pack howitzers were made that year. I find it interesting that they designated that it could be used with the M2 and M3 vehicle mounts as well as in the pack configuration.

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

The M1A1 had a modified breach block and breach ring.

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

M8 Carriage

The M8 carriage configuration gave it pneumatic rubber tires as opposed to the original wood spoke with metal rim wheels.

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

There are welds all over the unit to demil it

Cleaning M92 PAP muzzle cap detent pin with a cotton swab

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

The above photo is of the Hannifin Manufacturing plaque on the carriage. You can see the welds they did – they went to great lengths to make it inert.

Here are some photos of the muzzle end – the rifling is still there.

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

Here are a few more photos:

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

I was pleased to see it was still in fairly good shape. The howitzer is up on metal blocks so the tires aren’t bearing the load. The flag, Old Glory monument and the howitzer make for a nice combination to reflect.

M92 PAP muzzle cap on wooden surface with detent pin ready for installation

 



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



Cost-Effective Sanding Belts for the Work Sharp Ken Onion Knife Sharpener

I’ve had a number of guys email me asking if there are affordable replacement sanding belts for the Work Sharp Ken Onion (KO) edition knife sharpener.  The short answer is yes.

The actual Work Sharp brand belts work very well but they are pricey.  A group called Econaway Abrasives is making affordable replacement belts that I’ve had very good luck with.  Note that the Ken Onion edition uses a 3/4″ wide belt whereas the traditional Work Sharp uses a 1/2″ belt.  That means the KO can use either but the traditional can’t use the KO belts.

6/1/19 Update:  I’ve also had good luck with belts from Red Label Adhesives.

There are other brands starting to show up as vendors realize there is a market opportunity for them.  Econaway and Red Label are just the two that I have first hand experience with and hope this helps you save some money!



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



Old Glory – I Am The Star Spangled Banner…

My parents are buried in the Battle Creek Memorial Park cemetary. During our last visit, we stopped by the veterans memorial. On a boulder by the American flag is this plaque:

M92 PAP muzzle cap removal: Close-up of detent pin and barrel threads.



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



The EWK Vacuum Fluid Extractor is Darned Handy to Drain Engine Oil and ATF Through the Dipstick Tube!!

Folks who know me also know that I am always tinkering with something – cars, trucks, tractors, firearms, you name it.  A few years ago a guy showed me how he could change fluids in his car using a vacuum siphon and I was intrigued but let it slide.

I recently went through all our old Toyotas and changed the transmission fluid to Valvoline Max Life and it dawned on me that it would be real nice to have a way to more precisely get the fluid right where I wanted it in the transmissions because I had slightly overfilled one car.  Then I remembered the vacuum siphon and hopped on Amazon.

The EWK 6.5 liter (1.71 gallon) pneumatic or manual fluid extractor looked like just the tool for the job.  I always pay close attention to reviews and this unit really had good ones – 277 reviews and a score of 4.4 out of 5 stars.  That’s pretty good statistically – I like to get well past 30 reviews and the more the better.

At any rate, thanks to Amazon prime, I ordered it and the unit arrived two days later.  I must say that I was impressed.  The plastics are all well done and it worked like a charm.

M92 PAP muzzle cap, spring, and detent pin on wooden surface

In this next photo you can see the little adapter and hose extension that comes with the unit.  They say three in the ad and the first hose is attached to the cap with a strain relief.  The hose is about  .39/.31 (OD/ID) and 39.3″ long.  The other two hoses are basically extensions via a soft rubber connector.  I am using the medium extension that is .26/.21 OD/ID) and also 39.3″ long.  That diameter has worked fine for Toyota T-IV ATF, Valvoline Max Life ATF  and also 10W30 engine oil.  When I say it can suck, that is a compliment in this case 🙂

M92 PAP muzzle cap, spring, and detent pin on wooden surface

The next photo shows the pump handle and also the venturi vacuum generator.  I have that air line on my dryer system and is running 90PSI off a 60 gallon IR two stage compressor.  It really didn’t use too much air.  No vacuum generator will win awards for air use but you don’t need to run it for very long – just while you are pumping the fluid out and that will probably be about 2-3 minutes for most engines and transmissions.

M92 PAP muzzle cap, spring, and detent pin on wooden surface
M92 PAP muzzle cap, spring, and detent pin on wooden surface
M92 PAP muzzle cap detent pin removal

The first time I used it, I did so with an air line (it can use compressed air to create a venturi vacuum) .  It actually pumped way faster than I realized and I had over a quart out of the car before I realized it.  You can definitely reduce the air flow to reduce the vacuum – it was just faster than I thought it would be, which is good news.

I was so impressed that I used the extractor to remove all the ATF from a 94 Corolla in very short order.  I let it pump until nothing else came out — no problem.

I recently needed to change the oil in my tractor – again, used the siphon and it drained it very quickly.  This is noteworthy as I used the hand pump to create the vacuum and it really was effortless.  This was also when it dawned on me I better take some photos 🙂  You can see it pulling out the 10W30 no problem at all.

M92 PAP muzzle cap detent pin removal
M92 PAP muzzle cap detent pin removal

In this next photo, you can see the unit with the hose cap off – it just twists off – and this is the pour spout to empty the unit also.

M92 PAP muzzle cap detent pin removal

I’m still on my first set of hoses but they do have a variety of replacement hoses on Amazon in case you want just one hose or a set.

In summary, it’s a great unit.  I’ve not had any problems at all and recommend it. Here’s the link one more time:

7/18/2023 Update: Still working just fine – it’s a lot dirtier from use but is still doing the job. A fellow did ask me if they have other sizes and the answer is “Yes”. Click here for the EWK store on Amazon.

6/28/2022 Update:  Still working great.  I’ve used this on cars, trucks, tractors and even to suck the hydraulic fluid completely out of my snow plow’s hydraulic fluid reservoir.



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



Sick and Tired of Mosquitoes? How I Got Rid of Them With Talstar P Pro

M92 PAP muzzle cap, spring, and detent pin on wooden surface

Our home is in a former swampy area that was drained in the 1980s and a subdivision built.  In short, you dig down and can hit water fairly soon – usually within 10 feet.  At any rate, we’ve had a very wet spring and summer and had standing water in our lawn until late-June and the mosquitoes have been the worst I ever recall in the 20 years we’ve been here.  We could not stay out at night or we’d get attacked unless we hosed ourselves down with Deep Woods Off.  In short, something needed to be done.

This hedgerow is right by my garage and ensured the mosquitoes had a perfect base to attack me from and rings our property:

M92 PAP muzzle cap and detent pin assembly

When I was at Ace Hardware, I saw Off! brand’s Backyard Pretreat that was supposed to kill mosquitoes and leave a residue to repel them.  I thought they would know what to do given their experience – as it turns out, this product is a rip off.

M92 PAP muzzle cap and detent pin assembly

I’m sad to report that after three jugs of this stuff and my getting bit over and over while applying it, I can’t say it did anything at all even several days later.  I really had high hopes – I dragged a long hose all over the place spraying stuff down over and over with no noticeable improvement.

On Facebook, I posted my woes with Mosquito control and a friend, Allan, suggested Talstar P Pro and a Ryobi cordless electric sprayer to help with evenly spraying a ton of solution.  I had never heard of Talstar so I did a search and it is very well regarded.  Allan told me they live on a wooded ravine and he’s been using it for 10 years to control mosquitoes and it worked exceptionally well for him.

Talstar P Professional

Every once in a while on Amazon, you see a review score that is mind blowing.  FMC’s Talstar P Professional 96 oz has 2,263 customer reviews and a combined score of 4.6 out of 5 stars.  That is one heck of a score and is only possible if something works really, really well.

5/21/2023 You will no longer find it on Amazon – you need the liquid Talstar and I tend to find eBay the best source to buy it. Click here for a current list on eBay.

So, based on what I read and Allan’s recommendation, I ordered the 96oz bottle.   I then read up on the Ryobi sprayer.  It gets good reviews, uses the 18volt Ryobi batteries (it comes with one battery and a charger) and it has a three year warranty.  I ordered it off the Home Depot website [Click here]  as they had free next day home delivery and since I had to wait for the Talstar, I figured it would save me a trip.

Note:  You can use any pressurized sprayer you want – I have 1.5 acres and knew I would be applying gallons and gallons of it.  My shoulders and elbows hurt enough as it is and I didn’t want to incur the repetitive stress.

The sprayer arrived the next day and the Talstar the day after.  While I was waiting, I went to the FMC website to read up on Talstar to make sure I understood how to apply it plus I peppered Allan with his experience.

I would recommend you go to the website [click here] as they have recommendations on best practices for mosquito management and Talstar P Pro is actually interesting from a chemical perspective.

The active ingredient is Bifenthrin, which is similar to the chemical extracted from Chrysanthemums to kill insects.  Here are two links so you can read more at the National Pesticide Information Center.the user guide for the Talstar P.

Ryobi Model P2830A One+ 18-Volt Lithiu-Ion Cordless 2 Gallon Chemical Sprayer

Here are photos of the sprayer.   I charged the battery and screwed in all the fittings.  They are all lose so be sure to do that.  I didn’t have any loose plastic in the tank but I did rinse it out just to be safe.

M92 PAP muzzle cap and detent pin assembly
M92 PAP muzzle cap and detent pin assembly
M92 PAP muzzle cap and detent pin assembly
M92 PAP muzzle cap and detent pin assembly

Application

After reading the user guide, I planned to use one ounce of Talstar to one gallon of water to ensure I had residue to continue killing mosquitoes.  Since it was a two gallon tank, I increased it just a bit to 2.5 ounces per two gallon tank.  Note, a real nice perk is that the tank lid is a measuring cup!  I would use it, rinse it out and pour the mix into the tank before filling it with water.

M92 PAP muzzle cap and detent pin assembly

While doing the work, I wore Nitrile gloves just to avoid contact plus I was constantly adjusting the sprayer tip from coarse mist to a stream to try and reach back over brush, through leaves, etc.

M92 PAP muzzle cap and detent pin assembly

FMC recommends spraying at night or in the evening when mosquitoes are active.  I was busy the first night so I did it the following morning at 7am.   I mixed up two gallons and started spraying around the house, pool, garden and so forth.  I hosed down the bushes, the walls of the house and under the eaves.  I also sprayed the hedge – first using a coarse spray on all the brush, leaves and ground.  I found adjusting the tip to a stream was handy to penetrate the brush and also reach further back.  I’d just come back to the hose and what not and mix another two gallons of spray (2 gallons water and 2.5oz of Talstar) and kept spraying.

It took me aboput 30-45 minutes and 8 gallons, or four complete tanks, to do most of our yard.  I skipped probably a half acre of grass starting about 100-150 feet from our house but I did all of the hedge row, bushes, etc.  I was pleasantly surprised that the 2.0Ah battery was able to do the whole yard.  When I finished the first batch, I did plug the battery in and let it charge.

That night I still saw mosquitoes, but fewer of them, and applied a second dose around 7:30-8pm.  Same procedure – 8 gallons focusing around the house, all the bushes, etc.

Results

The next morning – no mosquitoes.  Whoa!!!  I did not see one single mosquito all day.  That night I worked on cars without being attacked!  I did so again yesterday and just had breakfast with my wife in her garden — something that would have been next to impossible.

I’d say the spray got a good number of them but when they landed in the residue, that got rid of a ton as well.  In other words, you might see a bit of a delay from dose to noticeable reduction.

In four weeks, I am going to do it again.  Even my wife, who always groans at me and my tinkering, was impressed and told me to make sure I apply another dose before the first one wears off!

It’s really not that expensive in the long run.  The bottle holds 96oz.  I use 10oz per 8 gallons (4 batches x 2.5oz/batch).  If I apply it twice per application, that means I’ll use 20oz per time, which means I’ll get just over 4 complete applications (so about four months of protection).  At $35/bottle, that’s about $9/time plus however you want to account for the sprayer.  For me, it’s worth it.  My wife really reacts to mosquito bites plus we can enjoy being outside again and I can go back to working outside without getting attacked.

I’d highly, highly recommend you skip the ripoff gimmicks and temporary fixes.  Spend the money and get Talstar Pro and a spray bottle (if you don’t have one).  It made a world of difference for us and wanted to spread the word that this stuff really works.

May 21, 2023 Talstar is no longer on Amazon but there are tons of sellers on eBay – click here to open eBay and see the latest Talstar P Pro liquid listings..



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



Polish Build Runs Like a Top

I will do a more In-Depth series of posts about building this rifle later. It is a Polish WBP kit l at the heart from arms of America with a Polish cold hammer-forged Barrel. The internals are installed in a Childers Guns receiver. The trigger is from ALG and I absolutely love it. I kid you not, this is now the only trigger I will use because it is so good.

The muzzle brake is a JMAC RRD-4C and boy does it eliminate muzzle climb. It made the rifle very controllable even during rapid fire.

Dremel cutting tool removing M92 PAP muzzle cap with detent pin

The optic is a vortex Crossfire. The furniture is original polish Beryl with one of our US made 922r Beryl grips.

In the following video, this is my buddy Niko doing the shooting and while he is tall and wiry you can tell that the full-power Golden Eagle hundred and twenty four grain FMJ 7.62 x39 round is not moving him much at all.

The build turned out to be extremely reliable and accurate. Like I said I will post more details later but I’m thrilled with the results and had to jump the gun and share this!



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



I Loathe Telemarketers, Robo Callers and Unwanted Callers

Simply put, I hate telemarketers and robo callers and unwanted callers. I pay for my phones and they should have no legal right to intrude on my time. The phone will ring and I will go rushing to answer it or stop working on whatever project just to find out it is an unwanted caller. It is so annoying!!  Robo callers are automated tools that call you and then a recording kicks in – you can’t even yell at them!  Worse yet, the technology allows the telemarketers to call thousands of people per day if they want.

Caller ID helps a bit – the land line rings but I don’t pick up unknown callers, names I don’t know, or when the display just lists digits. I wish the phone didn’t ring at all but traditional home phones aren’t smart.

What really irked me was that they started calling my mobile phone more and more these last few weeks. But wait… I have a smartish Android Note 5 phone. Is there an app that can help? Yes, and it’s called “Should I Answer?”

Surprisingly, it is wickedly good and free. I’d pay for this!! Look at the above stats – a million downloads and an aggregate score of 4.8 out of 5.0. That is remarkable.

Basically, it rates each caller and warns you based on a shared community database plus you can store your own private info. I gleefully contribute to the community’s database to warn others and exact revenge on unwanted callers interrupting me.

To install it, download it from the Google play store. Answer yes to the permission prompts.

Dremel tool removing M92 PAP muzzle cap detent pin

Dremel tool removing M92 PAP muzzle cap detent pin

As you can see above, you have a ton of control via options you can set. I turned on the options to download reviews and to flat out block negative calls either rated so by the community or by me locally.

It works very well and has decent help under the “About” tab.

Dremel tool removing M92 PAP muzzle cap detent pin

Here’s a screenshot of me negatively rating a robo caller trying to sell insurance:

Dremel tool removing M92 PAP muzzle cap detent pin

I think the app is great and have been using it for about a week. If you are fed up with unwanted callers, definitely check out “Should I Answer?”



Please share the link on Facebook, Forums, with colleagues, etc. Your support is much appreciated and if you have any feedback, please email us in**@*********ps.com. If you’d like to request a report or order a reprint, please click here for the corresponding page to open in new tab.



When Strength and Quality Matter Most