Tag Archives: Desert Eagle

Range Report For The Desert Eagle 1911, RIA Rock Ultra FS HC, and Springfield Armory 6″ TRP Operator 10mm Pistols

Well folks, at one point I had three 1911-style 10mm pistols. A Magnum Research Desert Eagle (model DE1911G10), a Rock Island Armory (RIA) Rock Ultra FS HC (model 52009) and a Springfield Armory TRP Operator (model PC9610L18). While I like the 10mm cartridge, I didn’t really need three pistols so I decided to take them to the range to decide what I would keep and what I would sell.

The Ammo

I took with me about 200 rounds of Ammo Inc’s 180gr TMC load that I had purchased from Palmetto State Armory during one of their daily deals. TMC stands for “total metal case” – meaning the lead is fully encapsulated by the copper jacket. With full metal jacket (FMC) ammo, the base often has the lead core exposed. Ammo Inc is interesting in that they decided to go the public company route and we’ll have to wait and see how they fare when the panic buying dies down.

I also took about 200 rounds of Sellier & Bellot (S&B) 180gr FMJ ammo as well. It’s been my “go to ” 100 range ammo for years. If you don’t know S&B, they are an excellent ammunition producer located in the Czech Republic dating back to 1825.

That is some of the Ammo Inc 180gr TMC ammo in the bag and S&B 180gr FMJ in the tray.

To round out the test ammo, I took some Underwood 155gr XTP and 200gr XTP jacketed hollow points (JHP). I only had about 50 rounds of this and I wanted to save it for the final round of testing.

For the past six months, finding ammo has been a bear but suppliers are starting to build up inventory. Judging by my inbox, more and more emails are being sent saying “we have ammo in stock” and even a few sales. These tend to come shortly before prices start to drop based on past panic buying ammo shortages [click here for my blog post on the economics of ammo during a panic].

The Range

It was a beautiful March day when I arrived at the Berrien County Sportsman’s Club to use the pistol plate range. The plates are about 30-35′ feet back from the firing line and I had it all to myself.

BCSC is my favorite range hands down and I have been a member there for many years. Definitely a cool place for a variety of sportsman and family activities.

The 10″ steel plates are located about 30-35 feet from the firing line. I really enjoy these for testing pistols. Note the pull cord to reset the plates.

First, the 6″ TRP Operator

As I have written in the past, the TRP Operator was not reliable out of the box and this was a do or die outing for the pistol in terms of whether I would keep or sell it. The TRP Operator is basically a 6″ 1911 and the marketing would lead you to expect that it would have been stunning out of the box but it wasn’t to be perfectly blunt.

Thankfully, after work both myself and Springfield Armory’s repair groups did, it finally handled the way it should have when I first got it. This time around, functioning was reliable and the recoil was handled nicely by the heavy pistol with it’s 6″ bull barrel.

The TRP put in a good showing this time around. All the kinks had been worked out and it ran great.

I was able to fire round after round at the plates at 30-35 feet and hit them. I really wasn’t shooting for benchrest accuracy – just shooting at plates to decide what to do.

Honestly, I had a take-it-or-leave it mentality on front serrations on a slide until I got into 10mm 1911s. Their recoil spring is stout. All of a sudden, those front serrations are really handy. My RIA 52009 does not have them and is way harder for me to hold when racking the slide from the front that the TRP or the Bul.
I was running both Wilson Combat ,and Tripp Cobra mags in both the TRP and the Bul. Both brands are excellent. You can see a Cobra 9-round magazine peaking out of the mag well in this photo. Their beveled base plate is an immediate give away.

In summary for the TRP, it ran just fine but it did nothing to wow me.

Next – The Magnum Research Desert Eagle (model DE1911G10) by Bul Armory

Okay, next up on the testing list for the first time was my new Desert Eagle 10mm that is actually made by Bul Armory of Israel. Out of the box it had the best trigger of any 1911 I have owned and the action was very smooth.

Now I have written about this particular pistol going to the range before – it’s just that I am finally sitting down to write this bigger post about all three pistols just under two months after the range trip. Here are a few pictures for you:

Here’s the Bul with some of the Ammo Inc 180gr TMC ammo and a collection of Wilson and Cobra mags – it ran through everything I brought including the Underwood JHPs with no problems.

Here’s the 6″ TRP on top and the 5″ Bul on the bottom. Those front slide serrations make racking their slides a lot easier.

Let me sum it up and say – I really, really like this pistol. It functioned flawlessly and felt great. With the TRP, I was not impressed by the time it finally worked right. The Bul’s performance was nothing short of fantastic.

Last But Not Least: The Rock Island Armory (RIA) Rock Ultra FS HC (model 52009)

This was the first trip for the RIA Rock Ultra FS HC – let’s just call it the 52009. I wrote a blog post about my first takes and things were looking good so far. At any rate, I knew with the RIA pistols that you needed to clean and lube them plus I slightly beveled the chamber edges and polished the ramp.

I was really curious to see how it would function not only in general but also with the new magazines I was making for them. I also wanted a higher capacity 10mm 1911 if possible so there was a lot riding on the trip.

It looks familiar until you notice the really thick pistol grip and the big mag well funnel.
The 52009 is the bottom pistol and the TRP is the top right. You can see the collection of custom mags I was testing – what you don’t see is that their mag lips are different lengths. I actually found the 52009 very tolerant of different lengths – reliable feeding was a function of how spread open the lips were to point the cartridge towards the chamber. See the magazine laying with it’s back up in the top row? The magazine to the right was the only original RIA ACT-Mag I had to base my work on the shop.
See how short the lips are? By adjusting the lips, it fed surprisingly fine. I have one mag with even shorter lips and it worked.
The stock of 10mm Ammo Inc rounds was dwindling. Let me tell you something – the Mag-Lula universal pistol magazine filler is worth its weight in gold. I really can’t tell you how many 8, 9 and 10 round mags I filled (and emptied) shooting the TRP and Bul pistols but by the time I got to the 52009, my hands were aching thanks to my carpal tunnel issues. By the way, two months later and that loading “finger” you see in the Mag-Lula is now brass colored from all of the magazine test fitting I have done 🙂

To sum up the 52009 – it was starting to wear in and felt surprisingly good. I sure missed having the front serrations on the slide because by the end my hands were starting to ache and my ability to squeeze hard enough to hold the slide and rack it was dwindling.

Once I identified the good mags and problem mags and focused my efforts, it ran great. I was quite pleased with it and I can tell you now that I have cycled it thousands of times fitting magazines, it is quite smooth. The 52009 and RIA 1911/2011 pistols in general are really good examples of parts need to wear in, or get to know each other, to get rid of tiny burrs/imperfections left over from manufacturing.

Would I buy it again? Yes. Was it my first choice? No, actually it wasn’t. I really wanted a high cap 5″ pistol styled after one of their Tac or Tac Ultra pistols that has the forward serrations and a Picatinny rail on the bottom of the frame. The reason being is that they are lighter and more compact than the 6″ Big Rock that I had years ago. Their 56862 model has a 5.5″ threaded barrel (hence the extra half inch) that I would have preferred but with the panic buying, it is impossible to find. Who knows – I may find one some day.

In the mean time, my only wish was that the 52009 hand front serrations – other than that it is a solid pistol.

Final Decision

As you can probably guess, the TRP Operator was voted off the island and my friend, and FFL, Scott Igert sold it for me. I felt pretty good about the decision too.

What’s interesting is that if you go to the Springfield Armory website today – the 10mm TRP Operator is gone. It could be that the demand just wasn’t there. I talked to a fellow at Dawson Precision awhile back about Stacattos (STI changed their name a few months back) and if they had any 10mm pistols because they used to have a number of models including the “Perfect 10.”) At any rate, he told me the demand just isn’t there – everyone is going for the 9mms these days. That might be the case for Springfield though I notice they are offering their Ronin model in 10mm.

TRP at the top, 52009 in the middle and the Bul is at the bottom.
Bul on the left and the 52009 on the right. Note how the 52009 has an ambidextrous safety and the Bul does not. Since I am right handed, I really don’t use the safety on the other side. Some guys train to shoot with both hands just in case their right hand injured and use the safety on both sides as a result so I can understand why it is a feature that some folks want.

That’s it for now. I hope you found this post useful.


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.



Concealment Express’ 1911 IWB Kydex Holster Is Nice!

Ok folks, I want to be up front about concealed carrying a full size 1911 – in my case a Desert Eagle 1911 in 10mm (DE1911G10) made Bul Armory in Israel. You will never wonder “Did I remember to put my pistol on?” Why? Because it weights 2 pounds 15 oz with 9 rounds of 155gr Underwood HP ammo and no holster is why. There’s no wondering because you can feel the weight and the big pistol pushing into your side.

With that said though, I do like and trust the 1911 design and the 10mm Desert Eagle 1911 has operated flawlessly since I bought it. Seriously, it is a remarkable pistol. Since I do have a Concealed Pistol License (CPL), I wanted a couple of carry options and started with an inside the waistband (IWB) holster.

After doing a bit of digging on affordable options, I bought a Kydex IWB holster made by Concealment Express off Amazon (I’ve since found that if you sign up for their newsletter from their website they will email you a 10% off coupon code for “joining the club” plus they do have good sales from time to time so you ought to check them out). To cut to the chase, I really like it and want to share some information with you about the holster.

Concealment Express is located in Jacksonville, FL, and makes their own holster. What I think makes them different is that they CNC machine their own aluminum molds so this lets them really pay attention to the details of the firearm and dial in their process for making them. Amazon carries a ton of their models – click here.

I used to make Kydex holsters but it was more of a artisan craft approach vs. cranking them out in a manufacturing setting. The reason I mention this is that I like their designs and their attention to detail.

First off, look at the very clean lines of the holster. Both exterior edges and details of the molding are very crisp and distinct.
The clip is made from ABS plastic, will fit up to a 1.5″ tall belt and the cant (the angle of draw) is adjustable from -5 to 20 degrees allowing for you to adjust it to your preferred carry and draw style. I am right handed and use same-side (strong-side) holsters so this is their right hand carry model – they can make left hand models as well.

Boltatron

Kydex is a brand name of thermal plastic that can be heated and shaped. It’s also become a bit of a catch-all term for plastic holders but there are differences including holsters that are actually injection molded.

In the case of this holster, the material is a 0.80″ thick thermal plastic known as “Boltaron” and it has some cool characteristics. Kydex can get brittle when cold and may crack when dropped plus in high heat (for example, when a hot barrel gets inserted into the holster), Kydex might soften and deform. Boltaron does not get brittle when cold and doesn’t form/deform until a higher temperature.

Boltaron has many colors and textures. This is their carbon fiber texture and just to be clear – it’s still the thermal plastic and not carbon fiber. By the way, the white specs are dust on the holster just to be clear. Also, note how corners and edges are rounded.

Safety Details

Okay, when I carry a 1911, it is locked and loaded – there is a round in the chamber and the hammer is cocked. Now the 1911 design has two safeties and I really need to rely on them when I have a loaded 10mm in my pants – yes, I can think of a lot of jokes with that comment too but am not going there 🙂 It has the grip safety and a thumb safety just under the rear of the slide.

These are the two safety mechanisms on a 1911. The most important safety mechanism is you – always remember that.

There’s not much you can do to safeguard the grip safety but I really prefer to have something protecting the the thumb safety to keep it from accidentally getting switched from safe to fire. Concealment Express designed their holster to safeguard the thumb safety.

Note how the Boltaron covers the thumb safety and reduces the odds of it accidentally getting switched off. A nice perk of the Bul design is that it has the traditional single side safety and is not ambidextrous. In many 1911s, there is a thumb catch control on the opposite side as well that could still get accidentally snagged but at least it is not right against your body with you moving up and down right against the safety.
You can see from the rear how the thumb safety is shielded.

Adjustments

They designed in two things you can adjust – the cant of the belt clip and they also have two screws that you can use to adjust the tension to make the pistol easier or harder to draw. When you tighten down the screws, the tension increases by drawing the two sides of the holster together. When you loosen the screws, the Boltaron wants to open back up and it becomes easier to draw the pistol.

You can adjust the cant (angle of carry) and the tension that is holding the pistol in the holster.
In case you are wondering how it works, the holster is formed formed on a mold under a vacuum. There is a filler that keeps the bottom edges of the holster open. The holes are drilled for the tensioning screws and the magic happens thanks to the two thick rubber washers. They compress when you tighten down the screws thus drawing the sides together and increasing tension. You can make it too tight such that the pistol can’t be drawn or holstered by the way so experiment with what works for you.

One important comment – always apply thread locker or the screws will slowly loosen over time. You can assemble with a blue medium strength compound like Blue Loctite or you can use a wicking medium-strength formula that is very then and is drawn back into the threads via capillary action. Never use red or permanent thread locker – those require heat to be removed and heat is not something you really want around thermal formed plastics.

What 1911s Does It Fit?

Concealment Express says it will fit most 5″ Government model 1911s that do not have rails. This would include models such as my Magnum Research /Bul Armory DE1911G10 as well as models from Colt, KImber, Ruger and Springfield.

As an aside, it does not fit my RIA 52009 for example – that is 16-round Para-inspired design that is more like a 2011 with a much wider grip. If I heated the holster up at the top with a heat gun and made it wider at the top, I could probably get it to work. I just point that out for folks wondering if this would work with one of the bigger 2011-style frames.

Conclusion

Plain and simple, the Concealment Express 1911 Government IWB holster is a perfectly decent holster. It’s built nicely and is easy to carry (albeit with a heavy pistol). “Is that a 1911 in your pants or are you just happy to see me?” springs to mind 🙂 At any rate, I’d recommend and will continue to use it myself when I do carry this big pistol.

Concealment Express Makes Many Holster Models

I’m impressed by their approach and plan to buy one for my Glock 29 Gen 4 and will report back on my experiences. Click on the following ad to go to their website:


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.



Adjusting Rock Island Armory FS A2 HC Magazine Feed Lips – It’s Easier Than You May Think

In most magazine fed weapons, the angle at which the cartridge feeds into the chamber is critical to reliable functioning. This is certainly the case 1911-style pistols. I wrote up a blog post outlining what I did to modify Mec-Gar Para P16 10mm/.40 magazines over for use in the Rock Island HC-series (High Cap series) pistols such as my 10mm 52009 (click here if you want to read it). I got a few emails from guys asking if I could explain what needs to be done to adjust the cartridge angle.

Okay, so what is controlling the feed angle is in part the shape of the lips, the gap between them and the shape of the follower. Let’s take a look at an ACT-MAG that works for both .40 and 10mm:

This is a Rock Island Armory 10mm magazine. It’s made by ACT-MAG and is part number  OEMP164015B. RIA worked with them to design the angle of the lips, the gap between the lips and the shape of the follower to feed the round at the right angle. The cartridge is a 10mm Underwood with a 155gr XTP JHP bullet. Look at the angle.

There are a whole bunch of reasons why you need to adjust the angle as a consumer. Slight variations in how the pistol or magazine were made, wear over time, etc.

What you can do is to bend the feed lips open or closed in the front to adjust the angle. This works because the cartridge is round and the gap affects how far up that part of the cartridge will rise up.

By changing the gap between the feed lips, the cartridge goes higher or lower. The trick is to adjust parts of the lips – usually just the front portion. Yeah, I can’t draw to save my life but I hope you get the basic idea.

In general, the back of the lips are relatively fixed because of the extra material around them. Now they can get bent out of shape for one reason or another and I would recommend you compare the front and back feed lip caps of a questionable magazine to a good magazine.

Safety Comment – Use Dummy Cartridges / Snap Caps

I said this in the first post and it is so important that I want to reinforce the message – I knew I was going to need to do a ton of cycling of rounds. Using live ammo is risky because you have the very real risk of a negligent discharge. To avoid this, order yourself in a bunch of dummy cartridges. There are sellers on eBay that will sell you 10+ at time. Order yourself in 10-20 rounds. You are going to smash the crap out of them due to the heavy recoil spring a 10mm uses. I trashed at least 10-15 of them. Most were due to the bullet being smashed back into the case, one dented the case pretty bad and one deformed the case right at the mouth.

I can’t even guess how many cycles I did – especially starting out. I’m going to hazard a guess and say I averaged about three cycles per dummy before something failed on the dummy as I worked out the kinks and I would load three rounds per magazine to do the testing.

I can’t stress it enough – get dummies to tune your magazines.

Actually Adjusting The Lips

The goal is for the bullet to point straight into the chamber so that when the slide goes forward, the cartridge is stripped from the magazine and is fed straight into the chamber. We can move the front of the cartridge up and down by changing the gap between the lips.

In general, the gap at the back of the lips tend to be slightly smaller than the front. What happens is the cartridge gets pinched/stopped at the back while the relatively wider front portion allows the cartridge to be pushed farther upwards per the figure above.

Do not rush! If you take your time this goes pretty smooth. Do a little bit of adjustment and test over and over. It gets easier the more you do it.

If you need to close the lips, you can slightly crush them in a soft-jawed vise, use rubber/plastic tipped/non-marring pliers or light taps with a non-marring hammer. Just do a little and test over and over. In general, I use either the vise or pliers depending on how my hands feel as I prefer the control vs. tapping with a hammer. Everyone has their preferences and I know guys who can rock with a hammer. It’s up to you.

I get it in the ballpark and then I fine tune by spreading the front lips open a bit with malleable chain pliers – these are made for being the links of chain that some hanging light fixtures have. Any plier that opens when you squeeze it, such as external snap ring pliers, can work.

These are malleable ring chain pliers. You can find them readily on Amazon or eBay – plus there are good odds that your local store selling hanging lights might have them as well. Also not the dummy rounds pictured and the odd mottled color. Those are from Realistic Snap Caps and work great.

What I do is to put the pliers inside the front edge and open just a tad. I don’t try to do it all at once – it doesn’t take much to open them up a slight bit. So do that and then test with dummy rounds (snap caps) over and over. You will trash a lot of dummy rounds doing this so keep spares around. I absolutely do not recommend doing this with live ammo – it’s an accident waiting to happen.

You just want to open that front part a bit to raise the cartridge up. If you need to close it. I really prefer using a vise or non marring pliers to squeeze the lips shut. Some guys use a rubber tipped hammer and that works for them but I prefer more control.
I put my pliers on that angled portion of the magazine tube to spread open the front but there are other approaches also.

You really need to experiment with every mag and fine tune them. I don’t have a set of measures that works perfectly every time. Instead, just remember to aim the bullet at the chamber and tune from there.

Last comment – always take your pistol to the range and make sure a magazine is reliable before you count on it. I like to number my mags to I can keep tabs on ones that are having problems and need adjustment.

Conclusion

This is what I do and it works for me. I know other guys have other approaches so do some searching and decide what works best for you. I hope this helps you out.


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.




The Magnum Research DE1911G10 10mm Pistol At The Range – It’s A Keeper

In the previous post I outlined my first impressions, cleaning and lubrication of the Desert Eagle 5″ 1911 in 10mm (model DE1911G10). I finally had a chance to get to the range and I was so impressed.

It was a nice Spring day as I set up at the Berrien County Sportsmen’s Club’s pistol range. I have always liked the club in general and I like to use their pistol range with metal plates at about 30 feet when I am testing pistols.

The 10 yard pistol range wih metal plates is great for testing pistols. I like how I can pull the rope and reset the plates for another round.

For testing,I brought some Ammo, Inc. 180 grain TMC rounds that I had bought in bulk from Palmetto State Armory (PSA). I have to confess that before I bought the ammo I had never heard of “TMC” and had to look it up. TMC stands for Total Metal Case where in the entire lead bullet is covered with copper vs. Full Metal Jacket (FMJ) that leaves the lead at the base of the bullet exposed. TMC is not a magic silver bullet though – there are pros and cons with the process but regardless, it is another option for you to explore when you are looking for range ammo.

I also brought with me a variety of other rounds including S&B 180grain FMJ, Underwood 155 and 200 grain XTP hollow points.

I also brought a number of Wilson Combat and TRP Cobra Mags with me. There are a ton of magazine makers out there and some tend to be better than others. I’ve not had a problem with Wilsom or Cobra 1911 10mm magazines yet.

The left magazine is a 9-round Wilson. The middle magazine is a 9-round Tripp Cobra and the right magazine is a 10-round Cobra.

For safety, I was using my shooting glasses and my Leight Howard electronic hearing protectors.

Looking Over the Pistol

You know, really wasn’t sure if I would like a two tone pistol but it has grown one me. The attention to detail is just remarkable and I wanted to share a few more photos:

Skeleton hammer, nice beaver tail, checkered backstrap. The G10 handle plates are surprisingly comfortable. Note the safety is not ambidextrous but since I am right handed, it really doesn’t bother me.
It’s a sharp looking pistol. I really wasn’t sure how I would like the two tone finish and blue/black handles but it actually looks really good in person. By the way, it worked just fine with all of the Wilson and Tripp Cobra mags I brought.
I kid you not, I was really surprised about how good the trigger pull was.
You can see the bull barrel and lack of a bushing. I really have grown fond of front serrations on slides in general to aid with getting a good grip to rack the slide. A 10mm 1911 tends to have a pretty stout spring so I like the serrations. My RIA 52009 does not and I can tell you it is not as easy for me to rack from the front.
I really like the attention to detail. Notice how the bottom of the G10 slab is beveled, the front of the grip is checkered and the mag well is beveled to aid in loading? That helps you get an idea of the attention to detail.
All the controls functioned just fine.

Shooting the Pistol

I got up to the line, loaded my first mag, racked the action, took aim and squeezed off a round of the Ammo,Inc 180gr TMC. The first thing I noticed was how smooth it cycled – It’s hard to explain what I am thinking when I test a firearm but the first few rounds are all about function – feed, cycling, ejection, etc.

I proceeded to shoot more magazines and noticed there were no failures to feed (FTFs) or failures to eject (FTEs). Matter of fact, after I shot probably 100-150 rounds of all the different 10mm loads I brought and had zero problems. Folks, that is remarkable right there. So often firearms have to wear in and I am kind of used to having a few problems as stuff gets to know each other. Not here – it ran like a top from start to finish.

In terms of accuracy, I was regularly hitting the plates. I’m good enough with a pistol so I’ll just say the pistol was hitting what I was shooting at reliably. I’ll try it from the bench some time and see.

The ergonomics were all solid. I liked the whole package – the trigger, checking, feel of the grip panels and the serations on the front of the slide. Matter of fact, this is the first 1911 in ages where I think I may well leave the G10 grip panels on it vs. swapping out to the Hogue wrap-around models I usually use.

The grip angle of the 1911 has always appealed to me. It enables me to use a natural point of aim meaning I bring my hands up and I am pointing at the target. With a Glock for example, I have to adjust my aim. Now everyone is different — if you are new to pistols, go down to your local gunstore and try different models. Literally see which one feels best for you.

Conclusion

This pistol is probably going to be one that I keep if I were to make a bet. As my friend Scott can tell you, it’s rare that I keep a gun around – I buy it, try it, learn from the design and move on. Every once in a while some design really strikes me and I keep it aroud. That’s the case with this Desert Eagle. They are hard to find right now and I bought mine off Gunbroker. If you find one, I’d definitely recommend it.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.





The Magnum Research DE1911G10 10mm Pistol – I Really Like It!

Ok folks, I’m experimenting with 10mms again. I had a run in with a bear last summer and while nothing happened, it sure made me want to carry a more powerful pistol than a 9mm. Years back, I had a Dan Wesson Bruin and a Rock Island 6″ Ultra that were both in 10mm that I eventually sold and was firmly in the 9mm camp for years.

My first 10mm to try out this time around was a Springfield Armory TRP Operator with a 6″ barrel. Folks, I genuinely was not impressed and reliability sucked out of the box (click here for a blog post about that). So I dug around and ran into the Magnum Research 1911-style pistols. Know what? They get great reviews and guys kept mentioning how well they were made and what great triggers they had.

I ordered a DE1911G10 pistol and it arrived a bit over a week later so I rushed over to my friend Scott Igert’s gun store (Michigan Gun Exchange) and checked it out. I was genuinely impressed by how smoothly the action cycle and the excellent trigger right out of the box. I’m used to things being gritty or really tight from lack of lubrication but this pistol was remarkably smooth. I’ve only encountered one other pistol this way – my Dan Wesson Bruin was slick – but nothing has come with this nice of a trigger right out of the box.

Before going further, let’s take a step back and look at who makes this pistol.

Magnum Research Makes 1911 Pistols?

The short answer is “no” but they do sell them. I owned a Desert Eagle Mk.V .44 magnum way back in the 90s so I was familiar with the Magnum Research (MR) of old but kind of stopped keeping track as the years went by. I did some digging and over the years they worked out deals with other firms to make certain pistols (for example IMI/IWI and Saco) they sold and eventually MR was bought by Kahr Arms in 2010.

The firm that actually makes the MR 1911 pistols is BUL Armory of Tel Aviv, Israel. They were founded in 1990 and make a wide range of CZ, 1911 and 2011-style pistols. Their pistols have s great reputation and are in use all over the world.

My Pistol

It’s a good looking pistol and I am glad it doesn’t have the huge gaudy engraved letters on the side that previous Desert Eagle 1911s had. If you don’t know what I mean, just look at some pre-2020 articles or posts and you’ll see.

I had to wait for some time to take the pistol apart, clean and lube it before going to the range. For those folks new to firearms reading this – you always clean and lubricate a new firearm – even if they come in a bag soaked in oil.

The DE1911G10 disassembles like any 1911 with one big exception – does not have a bushing so to remove the slide assembly requires the insertion of a pin in a hole they machined in the recoil spring guide (the round metal rod that the recoil spring rides around).

It seems like I am seeing fewer pistols with bushings – at least 10mms. The ones with a setup like this make takedown very easy – you lock the slide open, put a bent pin (MR/BUL provides one) into the exposed hole in the recoil spring guide, release the slide and then the recoil spring tension is removed. Everything then strips down real easy – easier than even traditional 1911s in my opinion because you aren’t fighting any spring tension trying to shove the slide forward.
With the pin in place and the slide released, the pin holds the spring in place. Note, I released the slide by gently racking it – not just dropping the slide stop as that will slam the recoil spring parts against the pin unnecessarily. If you don’t have a factory pin, you can bend a small paper clip to have a small 90 degree leg on one end. It doesn’t look very good but it does the job.
You pull the spring assembly straight back and out – including the pin. Just take care not knock the pin out. A 10mm pistol uses a stout spring and it will be a bear to re-assemble. A valve spring compressor is a huge help – click here for a post about it.

Cleaning and Lubricating

For a while now, I’ve been using RamRodz to clean pistol barrels and bought packages for both my 9mm and 10mm pistols. I like how tight they fit and I can really clean out the barrels. I coat them with CLP to do the cleaning, lubrication & protection (hence the acronym CLP).

I wiped everything down to remove any dirt or debris from the factory. Other than the oil that coated the pistol from the factory it was very clean. In looking at the parts, everything was nicely made, fitted and assembled. So far, so good.

Here’s the field stripped pistol with all of the major parts plus you can see the RamRodz, CLP and my precision SuperLube applicators.

To lubricate the pistol, I use Superlube liquid to get all of the traditional points except for the slide rails and the heavy bull barrel. On those I user SuperLube synthetic grease to make things slick. Folks, when it comes to lubrication you will get a million opinions and get into arguments. It just so happens that I find SuperLube works really well and I use the grease on all of my firearms now where parts slide together. It’s a synthetic grease and it has tiny PTFE (Teflon) particles in it to help with lubrication. I know when you hear “Super” in anything it sounds like a rip off but this stuff really works and I have been using it for a few years now on my pistols and rifles.

I use an acid brush to lightly apply SuperLube grease to all surfaces the slide – the frame rails and the bull barrel because it directly contacts the slide. It makes one heck of a difference folks.

Re-Assembly

Again, it’s just like a 1911 with the exception of that recoil spring assembly. Just insert the barrel into the spring and then carefully insert the recoil spring assembly so the groove is against the barrel and don’t knock the pin out of the hole.

Re-assembly is easy with no spring to fight. Just don’t knock the retaining pin out of place.

Video For People New to 1911 Pistols

If you are new to 1911s I have great news – there are tons and tons videos, blogs and books about how to clean and care for your 1911. Just remember by comments above about there not being a bushing and the takedown pin you insert in the recoil spring guide — otherwise it is the same.

The following video from Ruger has a very similar bull barrel, no bushing and uses a pin. The person doing the video does a nice job.

This next video covers re-assembly:

These next two videos provide nice overviews of cleaning a 1911:

Conclusion

The action and trigger were so slick at this point! I was deeply impressed. After lubricating, the trigger pull averaged about 4 lbs 2oz using my Lyman digital trigger pull gauge. In general, I like the trigger – I can feel where it is going to break and then can cleanly pull through.

Okay, with this part done and my seriously liking the pistol up to this point, I had to take it the range and that will be the next post.


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.