Category Archives: Weapons by Country

AK & Related Rifles, Serbia

The Century Zastava PAP M77 in .308 – With Battleworn Furniture

Years ago, I had a Zastava M77 and regretfully sold it back in 2014. It was one of those situations where I had to sell it to fund other projects but I didn’t even get a chance to shoot it. I also had a custom M76 (the 8mm version) for a while but I did sell that one – mainly because it was a primer popper. That is a known issue because the firing pin hole opened up out of spec due to corrosive ammo use and didn’t adequately support the primer as a result but I digress.

I had resisted buying another one until Zastava decided to release what they called the “Battleworn” model (ZR77308W) and I caved. On one hand, it comes with some really nice retro looking Europen beech wood furniture. What really got me was that it was way cheaper than their other models that had optics and/or polymer furniture at that time.

Why the M77?

So, I had wanted to get back into the Zastava designated marksman’s rifle (DMR) game for a while and was just biding my time. The reason I wanted the M77 was due to all of the quality match 7.62×51 and match .308 match ammo that is out there. In comparison, try finding affordable true match grade 8mm ammo for the M76 or match 7.62x54r for the M91. You can find it once in a while but it’s not cheap and choices are limited here in the US. On the other hand, match 7.62×51 and .308 plentiful and affordable.

So, the main reasons were the ammo and the second was the M77 Battleworn model being very affordable in the Late Summer of 2023. As I am writing this, a quick search on GunBroker shows the Battleworn model selling fro $1369 with one 20-rd magazine up to $1,499 with five 20 round mags plus the various models are a lot closer in price. I paid less last summer but you get the idea. (In 2014 I bought a M77 with a thumbhole polymer stock and polymer handguard set for $600 or 700 from Centerfire Systems but that’s the way pricing goes – any vendor will raise prices to what they think the market will bear to try and maximize profits.)

Taking a Closer Look

It’s well packed in an egg foam box. Note the CSSpecs 25 round magazine on the box cover.
Honestly, the wood is really nice. It’s very reminiscent pf the M76 wood with a few minor exceptions – the grip does not have a ferrule, the recoil pad uses allen head screws and the stock bolt is one of their modern commerical shorter ones vs. the long Yugo military 8x1x260mm (about 10.23″ long).
Like many aspects of the original designs, the Yugoslavs modfield their scope rails and how they mount The result is more to the rear and is often refered to as “rear-biased” so they need a scope mount vs. an AKM pattern rail.
Honestly, the wood is cool. It has almost rough hewn look but better finished if that makes sense. The grip reminds me of one that Matt Shuster of Ironwood Designs came up with many years ago before he passed. I think he called it the “mini fat cap” – if someone remembers, please tell me. He made the M76 Fat cap patterned after the original wierd awkward really fat but oddly short M76 grip but without a ferrule. Then he came up with a far more elegant smaller one and this Zastava design reminds me of it. Folks, Matt helped me get started years ago and was a genius with wood. God rest his soul and take care of his family.
It has the mile long 19.7″ cold hammer forged barrel. The silver disc on the gas tube is the three position gas regulator. It has a slant brake on it and 14x1mm left hand threads under it just like any other AK. A M76’s long flash hider is actually part of the front sight assembly but that is not the case with the M77 – you can install whatever you want. Also, note the cleaning rod.
Here’s a view of the rifle looking at the operating side. The chromed bolt jumps right out in contrast.
The M77 uses a bulged trunnion and the oversized AK receiver needs to accomadte it. These bigger 1.5mm thick receivers are beefy. They both hold the various component assemblies in position and the thicker receiver means more steel to compensate for any metalurgical or hardening shortcomings.
Zooming in on just the receiver. Note the notched selector/safety lever and the relatively tall selector stop. In the top right you can see the other side of the operating rod lock.

Opening it up

The locking dust cover was introduced in the M70 Yugo rifles because their doctrine made extensive use of rifle grenades. They didn’t want the cover top pop off so they added a sliding lock that holds the rear recoild spring assembly in place and, thus, the top cover in place. By the way, one of the really nice side benefits is that when you reassemble a rifle with one of these locks, you put the recol spring in front, install the dust cover without fighting the spring, push the button and the recoil rod pops out the back.
Looking at the locking assembl, the plunger button the operator pushes is at the bottom of the photo. The slightly elevated portion under the top lip of the trunnion (top in this photo – right side in real life looking down – is what slides out of the way wehn pressed so the recoil spring assembly can come forward for removal. What you don’t see is the hidden compression spring. If you ever need these parts, CNC Warrior make and sells both the whole assembly.
Looking down at the classic double hook AK trigger and double wound spring. I’ve had guys ask me why did they double these? The answer is fault tolerance. The second hook is there if the first should fail and the second spring winding is there should one of the two fail. In all of my years working on civilian AKs, I’ve never seen a hook fail but I have seen springs fail although very, very rare and usually from a surplus kit build.
Look at those hooks! They are forged and not stamped. The bevels in the front and the back help the bolt carrier pass by.
Here’s a better view of the three position gas regulator disc. Note the vent holes in the gas block itself.
One oversized bolt assembly. Despite what some may tell you, the PSLs and these M76/M77/M91 families of rifles are oversized AKs. The SVD Dragunovs use very different bolt carrier assemblies.
Longer than a normal AK gas pistol and chrome plated to improve corrosion resistance.
View from the side. Some of the machining is crude but effective in places.
Bolt extended in the carrier.
I chuckled when I saw this. There are two numbering systems on some of the parts – crisp machined ones and ones done by hand with an electropencil like you would see on some kits.
You an see the numbers of the key parts and they should all match.
Interesting – more holes to vent propellant gasses.
A better view of the upper and lower handguard assembly,
A view of the grip.
The buttstock has the distinctive grip area like you would see on the M76 military stocks. I have never had the purpose of that grip area explained to me.
It uses a classic Yugo military sized recoil pad. What’s noteworthy is that they have ditched the old slotted screws for allen/head-head screws.

Summary

This gives you an overview of the M77 battleworn model right out of the box. Nothing really surprised me and the quality looked good. Sometimes I buy stuff and regret it but not this time.

If you know me, you also know I could not going to leave it alone and the customizations will be in future posts.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

1911, Philippines

Added Browne Works Wood Grips to My New RIA 52000 Big Rock

Back in May 2023, I posted how I put Browne Works wood grips on my 9mm RIA 51679 Tac Ultra. I was honest when I said I did not like wood Grips before I saw what Mark Browne produces and actually had them on a pistol.

In early March 2023, I picked up my second RIA 52000 Pro Ultra Match 6″ HC 10mm pistol – more affectionately known as “The Big Rock”, which is exactly what it is. I sold my first Big Rock many years ago because I needed the funds and regretted it once I started making custom 10mm mags for whole family of high-cap 10mm and .40 S&W RIA pistols. I couldn’t buy a new one at the time because Armscor, who owns RIA, only seems to make them periodically. Maybe 2-3 years later after I wished I had it and was looking, 52000s started popping up on my saved searches – Gunbroker alerted me first and I bought one about a week later. [A number of places have them now including GrabAGun – click here]

I should add that as soon as I ordered the pistol, the next thing I did was to order another set of grip panels from Mark Browne. His grips just look and feel great compared to the rather boring but durable G10 composite grip panels that come with the pistols.

Bottom left is the new Big Rock with its factory grip Panels. Above it and to the right is the 51679 with Mark’s wood panels. The lighting doesn’t do the wood justice.
Here is a better view of the wood on the 51679 plus you can always go to the blog post about it and see more.

The new panels for the Big Rock arrived

I emailed Mark and told him how much I liked the first set and he said he’d look for one with plenty of grain and contrast. What showed up was awesome.

…Wow…

Fitting them to the Big Rock

While RIA does use modern CNC machines to make the frames, the funnel fitment can vary – I know this based on clients that have fitment issues with the relatively shorter 9mm mags using Dawson Base Plates. Either they do not use a jig or it moves and wheter the funnel sits exactly can very. Why this matters is that you may find the panels go right on or you may need to fit them. DO NOT FORCE THEM! So let’s step through this.

Each OEM grip panel is held in place with two unique Allen head screws. Remove the screws and the panel lifts right off. Note in this photo how very little material is between the grip screws hole and the funnel – that’s tight.
The pistols are made in the Philippines and then need to travel across the Pacific. They liberally coat these pistols in preservative oil and this is one example of how much they use. Have a towel or rag handy to wipe this stuff off before you start installing the wood panels. By the way, this is typical of all the RIA 1911 pistols and again highlights why you need to clean them.
This side went right on without adjustments being needed. That was an unexpected pleasant surprise. They panels need to seat fully without pressure being needed. If you try to force them in, something will snap.
Everything is nice and flat and the screws went in without forcing them. The screws are installed until they are firm – not so tight the wood snaps – they just have to keep the grip panel in position, You do need to use a dab of medium-strength screw threadlocker such as Loc-Tite Blue to keep the screws from backing out.
The other side had issues. Teh funnel was riding high here and the panel would not even seat fully. To adjust the wood, take a single cut file and remove a bit of wood from the bottom and try over and over.
Fitting is slow work with wood. It is better to be able to take more off than wish you could put it back on. After maybe 5-10 minutes I thought I had the panel good to go but it was still riding too high and the screw could not seat properly. So, more fiiling and testing until it fit completely.
Take your time and you will get a nice fit without a gap. This is a great example of time, patience and handwork can generate a far better end result than being in a rush with a sander and taking off too much. The bottom is the new Big Rock.
The top is the new Big Rock with it’s 6″ barrel and slide. I really like the gloss finish. It really brings out the contrast in the wood.

Summary

I can’t stress it enough – I really like the grip panels from BrowneWorks. The quality, fit, feel, finish … they are all there. If you are even remotely considering new wood panels for your RIA A2 High Cap pistol, you really ought to check out their website. Look for the menu button in the top left of the screen, click on it and then look for Rock Island grips.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Israel

Videos: Three Good Documentaries on The History of the Israeli Uzi – 2024 Edition

1 Comment

2024 edition prologue: I had to revise my list of Uzi videos to reflect one that had been removed from Youtube and two that were added.

As part of my research into the iconic Israeli Uzi, I found these videos that do a very nice job providing background on the political climate driving the need for the Uzi.  For fans of the Uzi, these may give you some appreciation for the forces that shaped it.

The second video is a great one from Ian of Forgotten Weapons:

And one more video:

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Israel, Uzi Builds

The Best Reference Book On Uzis

I recently wrapped up building a semi-auto Israeli Uzi in 9mm.  At the start, I researched about this iconic submachine gun and guys kept mentioning that I should get the book “The Uzi Submachine Gun Examined” by David Gaboury.  I ordered a copy from Amazon and must say I was very impressed. [Click here for Amazon’s page for the book].

Mr. Gaboury does an exceptional job giving the reader the historical context of what was going on in Israel with its fight for independence, the plethora of firearms they were using and then search for a new submachine gun.  Of course, this culminated in the creation and evolution of the Uzi design by Uzi Gal.

From there he covers the evolution of the weapon with the Mini Uzi, the Uzi Carbine, Uzi Pistol/Micro Uzi, Ruger MP9 and the Uzi Pro.  The book was published in 2017 and its coverage is very current.

One thing I did not know was how widespread the adoption of the Uzi was and Mr. Gaboury provides coverage of its use in The Netherlands, Germany, Belgium, South Africa, China and other countries.

He then covers a number of other topics in the book that I’ll skip for the sake of brevity.  For me, the last section of the book was very, very helpful where he provides significant detail on the weapon including:

  • Operation, Disassembly and Specifications
  • Parts Identification
  • Magazines
  • Accessories

Being new to Uzis, his coverage of the firing cycle, fire control group and how it all comes together in the grip frame (what some call the “grip stick”) was worth the price of the book all by itself.  For me, it was really the history and this last section the detailing of the operation and assembly that were hugely worthwhile.  I’d recommend this book to anyone wanting to learn more about the iconic Uzi.

Click here for the order page on Amazon to learn more and/or order the book. It has 68 ratings and is 4.8 starts – it’s very good!

Also, click here for a page that links to all of my Uzi posts for easier naviation.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Bulgaria, Russia and also USSR

Amazing tour video of the Hind Mi-24 helicopter by a pilot

Folks, I have found the Russian Hind Mi-24 helicopter absolutely fascinating for decades. Both I and the Hind are old enough to truly say decades in this case as it was delivered to the Soviet Air Force in 1970 but NATO and the West didn’t find out about them until 1972.

The HIND is a huge helicopter gunship and unique in that it has room for eight passengers. At the same time it is fast, armored and loaded with weapons. Soviet pilots called it the “flying tank: and other nicknames include Galina, Crocodile/Krokodil and Drinking Glass.

At any rate, it is very interesting and has evolved over the years plus the Soviets and later the Russians exported it to many countries including Bulgaria, Macedonia and many others plus it has served in a number of conflicts (click here for the Wikipedia Mi-24 page if you want more details).

The purpose of this blog post is to share with you an amazing video assembled by Erik Johnston where Bruce Stringfellow, a Hind pilot, gives a detailed walkround tour of the helicopter. How detailed? It has an hour and 16 minutes of detail – it is the best video I have ever seen if you want to really know more about the design, capabilities and what a preflight check looks like from a pilot’s view. Here it is:

Note, the photo shown at the top is extracted from the video and shared under fair use. I do not own the rights to the video and imagery – the video was created by and presumably owned by Erik Stone Photography. Please visit the actual Youtube video page if you wish to subscribe to Erik Stone’s videos or buy some of his merchandise to support his efforts.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Israel

My Galil Ace .308 DMR

Okay, I wrote about Galil Ace .308 Pistol some years back and it got sold at some point to fund other projects. However, when I sell firearms it’s not that there was any problem – like tons of other projects, I finished it, learned from it, got bored of it and sold it … that’s my usual progression for 99% of the firearms I buy. At any rate, some time last year it really dawned on me that the hands down best factory manufactured rifle that you can buy in the US today are the Galil Aces. I’m sure someone will argue with me but the evolution of the design that they did is remarkable regardless.

This is the original 308 Galil Ace before updates. I took the photo right as the sun was going down so everything had a bit of an orange hue to it.

RS Regulate Handguards

So, I bought a .308 Galil Ace rifle knowing I would get rid of the handguard. Yes, the factory one is functional but it is way too fat for me I prefer a long narrow one aluminum handguard. Even before I bought the rifle, I knew I would get one of RS Regulate’s GAR-14M-N handguards. The biggest problem you will run into with an RS Regulate product is finding one – his scope mounts are the best out there and the handguards are excellent as well. As a result, you may have to hunt around. I found one in grey thinking I would refinish it but the contrast actually looks pretty cool so I am running with it.

The original handguards do have rails under those covers but the combination is too fat for my taste.
This is the RS Regulate GAR-14M-N handguard in Desolation Grey. Installation is very straight forward and instructions are provided.
The two short screws and spacers are for attaching the handguard to the barrel. The long screw is for the rear. Install the rear end cap before you install the rear screw. Use blue Loc-tite on all. Use needle nose pliers to hold the spacers in place when you side the side screws into the handguard and on to the barrel.
The end cap goes to the bottom rear of the handguard and sits on the inside. Two additional short screws are in another bag for it. See the long needle nose pliers at the top? Something like them will enable you to install the spaces very easily.
This is the end cap right before I installed the screws.

Vortex PST II Scope

Because of the accuracy reports (1 MOA-ish) I also planned on getting a decent scope to make the Ace a designated marksman’s rifle (DMR). To explain, a DMR is a supporting rifle that usually has better accuracy and/or reach than the rest of the squad but it typically doesn’t have the accuracy of a true sniper rifle. From what I read, the Galil Ace would fill a DMR role no problem so I wanted a scope with a decent range starting with a low value so I would have a decent field of view (FOV). What I bought was a Vortex PST II 3-15×44 — first off, Vortex is my favorite scope maker and second, the second generation PST scopes are very clear and have good light transmission. I purposefully did not go with a 50mm objective because while it does pull in more light all things being equal, I didn’t want an topic standing up a mile above the receiver either.

American Defense Scope Mount

I’ve become a scope mount snob over the years after having a ton of problems with cheap ones – screws stripping out, moving on the rail, letting the scope move, quick release levers that bend on break off, crappy finishes, etc. To be honest, I am done with the cheap ones. My go to for scope mounts is American Defense – I also use the offset Vortex mounts that are also made by American Defense.

Why American Defense? They are solid quality all the way through – they are everything the cheap ones are not and have never let me down. So, yes, I will pay a premium for them and be happy about it. For this build and the smaller objective, I used a AD-Recon-X-30-STD.

This is an American Defense AD-Recon-X-30-STD scope mount with quick release levers. Excellent quality.

In Case You Are Wondering – Why .308?

Well, I am done adding yet another caliber and had a good selection of range and match .308 ammo that I can try out. When I do take this to a range, I’d like to find out what this particular rifle likes and buy more. By the way – for folks relatively new to firearms – you will find out that some ammo works great in one firearm and horrible in another so always experiment and find out what load your rifle likes. Handloaders spend hours agonizing over every possible details to find the round that works best at a given range and situation.

The Result

It came out pretty cool – I thought I would refinish the grey but it grew on me.

In Closing

The .308 Galil Ace is pretty slick. I really like the components I picked and now need to find time to go to the range. I will be adding a Magpul bipod before then as well.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Israel

How to Replace An IMI Galil Recoil Spring

I have written a number of posts now about my purchase of a James River Armory Gallant, which is a Galil ARM. During function testing, I noticed that the surplus recoil spring that JRA used was on the weak side. I would pull the bolt carrier back just a bit and the spring couldn’t push it all the way closed.

Other ways you may find out your spring is weak is if it is ejecting brass a mile away, the recoil feels different or the back of the carrier is showing signs of hitting the rear of the receiver. I always function test new rifles or kit builds that I have done and would recommend you do the same.

What to do?

The fix is real simple – replace the old surplus spring with a new one. Now there is some confusion about the recoil spring because the Galil AR, ARM and SAR rifles are chambered in 5.56 NATO. They do, in fact, use a standard AKM recoil spring even though those rifles are chambered for 7.62×39. This means you have a ton of options – surplus, new old stock (meaning old but unused usually), plus new springs from ALG, Wolff, etc. In my case, I had spare ALG recoil springs on-hand used one

The Galil recoil assembly is above and the brand new ALG spring is below, still in it’s packaging.
The recoil spring assembly may look challenging to take apart but it is actually very simple. The rod is two pieces, the spring and then the retaining end cap. If you remove the spring pressure from the end cap, it slides right off the rod and everything comes apart. NOTE – the spring is under tension so keep everything under control or you will be chasing parts and you do not want to lose that little retaining end cap.
I usually hold the rear of the assembly in a vise, use one hand to compress the spring and then the other to remove the retainer. You can the release the tension in the spring in a controller manner. If you don’t use a vise, you’ll wish you had three hands. Note, some guys will use small vise grip pliers with rubber tube or electrical tape on the jaws to clamp down on the rod with the spring slightly pushed back. They then remove the retainer and control the release of the spring as they remove the vise grips. Whatever works for you is fine. I go with the vise route and not the pliers because I don’t want to risk deforming/marring the surface of the rod.
This is a photo of the retaining end cap and the end of the guide rod. See how the rod is notched? The end cap just slides right on and the spring sits on the retainer holding it in place. It’s elegant in its simplicity.
At the top is the original spring. The lower spring is the ALG unit. Note the interesting “dead” center with the spring coils that are right next to each other. ALG says “The 2 to 3 dead coils in the center change the natural frequency of the spring, which prevents harmonics from damaging the spring and reducing its free length.” It’s interesting – we’ll see how it holds up.
The Galil’s use a tube recoil rod that I really like. The older milled AKs used them until switching to a cheaper and easier to make linkage of two bent wires. Many RPKs still use the tube style. I tend to think it creates a more consistent return but not everyone agrees with me and that’s fine. I don’t have a mountain of collected data from experiments to support my hunch. Regardless, to re-assemble the recoil rod assembly, I use this long center punch to support the inner rod as I compress the wire. Any object small enough to fit in the rear tube to support the front rod would work.
So you push or pull the wire back as you apply pressure to keep the inner rod slid out forward.
Here I have the spring easily held back and have placed the retaining cap back on. I then just guided the spring back into position and ensured it was sitting square on the end cap.
Here the end result. The newly assembled unit is to the top. A recoil spring assembly from a Galil SAR kit is under it for comparison and the old original spring is at the bottom.

In Summary

It’s easy to swap out the recoil spring and the rifle functions great with the ALG unit. Definitely function test your rifles before going to the range the first time to avoid surprises.

I hope this helps you out.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.

Israel

Cleaning and Tuning IMI Galil 5.56 Magazines

I have written a number of posts now about my purchase of a James River Armory Gallant, which is a Galil ARM wherein they provided a new US made receiver, barrel and pistol grip. They wanted to keep their costs down so the remaining three parts they needed for 922r compliance was to use a US-made Tapco Galil Magazine that is polymer and looks nothing like the original not to mention they are no longer being made!

The top mag is a polymer Tapco and the bottom is an original IMI surplus 35 round mag.

I wanted to use IMI surplus steel 35-round magazines that not only are the authentic ones to use but they are abundantly available. That meant I had to replace three more parts on the Gallant and the easiest is to swap the original Galil fire control group (the hammer, trigger and disconnector) with a US made group. The ALG AKT-EL is perfect for the job so I ordered one from PSA and installed it (click here for the big blog post I did about it). Next up was to source, clean and tune some original IMI Galil Mags, which is what this post will be about.

Finding the Mags

You can find surplus steel 35 round IMI Galil mags all over the place at websites that deal with surplus and gun parts. I bought all of mine from Numrich and they are in great shape at a fair price but you can also find them at Apex Gun Parts, Robert RTG, Aim Surplus and other places.

Numrich is a good firm to deal with. A few days after I ordered, a box showed up with my mags. Keep reading through because you do need to do some work.

Cleaning and Lubricating

Ok, these are surplus and they have been moved all over. Most feel like they have something on them for corrosion and are sticky. Some have a slightly dirty feel as dust and what not have stuck to the surfaces.

Do NOT try to use the magazines as-is. Take a few minutes to clean and lubricate them.

The bottom piece of sheet metal is the floor plate. Put a small blade screwdriver in the right end and pry while pushing down the locking tab you see sticking out in the middle. With the tab out of the way the base plate will come off and then the spring loaded internals are going to come flying out. To avoid this, pull the floor plate off about half way and then use your free hand to secure the internals as you remove the floor plate the rest of the way.
Once you have them all apart. you’re going to have a table like this.
I cleaned everything with brake cleaner and let it dry.
The parkerized finish did not let the follower slide as easy as I would like so I coated the inside of the magazine, follower, and spring with Super Lube Dri-Film Lubricant. Basically it is a PTFE (Teflon) in a solvent. So, you spray it on, the solvent evaporates and a film of PTFE remains. I like this because it lubricates without attracting dirt.
The white are the PTFE particles left after evaporation. All you need to care about is the inside. This is just extra that leaked out and I thought it would help to show what it looks like. Super Lube sounds like an infomercial brand but their lubricants are really good. The PTFE made a remarkable difference in how smooth the follower moved. Parkerized surfaces are rough and either they need to wear in or have something like PTFE to help.
To clean them up and make them look nice, I apply silicone spray and then wipe it off with a towel. I then let them evaporate for a while.

Fitting the Mags

Out of the eight mags I bought, three of them needed some help as they would not seat fully. In these cases, modify the magazine. If you told me none fit, I would look at the mag catch but in this case most fit so the issue was the mags.

I did not have a problem with any feed lips. The problems were all with the strip of sheet metal that is holding the mag catch tab. If you look close, it’s the strip hitting the receiver that is blocking seating the mag fully.
To resolve the issue, I used a small flap sander on my Dremel and put a beveled edge on the strip where it was hitting. Problem solved.

To do any testing with dummy rounds – not live rounds. I use A-Zoom brand dummy rounds, just FYI and I also was using my surplus steel Galil mags at this point because my 922r parts count was being met thanks to the new fire control group.

To test, I loaded up 10 of the blue A-Zoom snap caps and made sure they would cycle. In terms of hand feeding and extracting, I have to say JRA nailed it. The action was smooth and the Gallant fed from the surplus mags just as smoothly as the Tapco mag.

The mags look and function great as a result. Some of the mags did require some fitting so let me explain that next.

In Summary:

I can now use surplus mags like I wanted thanks to the ALG fire control group and these cleaned up mags. I hope this post helps you out.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something.