Category Archives: SIG

What sight pusher do I use and Recommend for my Pistols?

A fellow emailed me the other day asking what I use to remove and install sights on my pistols. For those of you wondering what a “sight pusher” is, it is a device that is used to push sights around on a handgun and can be used to install, adjust or remove the sights.

Of course, one size does not fit all so you tend to see pushers that are pistol specific, ones that are designed to with modular shoes, and ones that really shouldn’t have been made in the first place. Yeah, unfortunately I am not joking on that last part. Investigate any pusher before you buy it. Some are sloppy and if the shift or slip, they can put one hell of a scratch in your otherwise nice pistol.

Option #1: For pros who need to support many different pistols, MGW makes the best modular pusher

My good friend, Scott Igert, owns Michigan Gun Exchange and has been changing sights for his customers for many years. Because he has to deal with a variety of pistols and the job must be done right, he swears by his MGW (Maryland Gun Works) Sight-Pro pusher. It’s modular and comes with a 30 degree block for Glock and HK sights. In addition, there are a number of different pusher blocks available for use on other pistols.

Here’s a video from MGW in case you’d like to learn more:

Note, MGW also has a number of pistol model specific tools that work on just the one type of weapon. I’ll include them at the end of the post – they are good and just too many to list.

Option #2: Personally, I use the Wheeler Armorer’s Handgun Sight Tool

I work mainly with Glocks and 1911s and the Wheeler unit has worked just fine for my needs. It costs around $138 and so it’s economical. It’s very well made and hasn’t let me down after maybe a dozen uses in two years – again, I’m not using a pusher practically every day like Scott is.

One important thing to consider is that it does not have the flexibility of the MGW – Wheeler advertises it for use with 1911s, Glocks and M&Ps but I have read of a ton of other pistols being involved so do some searching before you buy. Unlike the MGW’s shoes, With the Wheeler, you can flip a plate in the back and the pusher surface that goes against the sight is either straight or angled depending on what you need.

By removing those two allen screws, you can flip the pusher around to either be the side with angled or straight pushing surfaces.
Here I am installing a suppressor height Trijicon sight on a Glock 34 slide.

The following photos let you see the Wheeler pusher from different angles – click on one to see them full size.

Here’s a video from Wheeler that will show you more about their tool:

Amazon sells the Wheeler Engineering Armorer’s Handgun Sight Tool and that’s where I bought mine. They also have a ton of copycat tools that folow the same color scheme. My experience with knockoffs is that they frequently cut corners that can come back to haunt you such as poor hardening, inferior metal, poor fitment, etc. Be sure to get a Wheeler – they have an online store within Amazon and you can click here to go there,

Summary

You’ll notice that I am recommending two pushers for different audiences. For pros wanting to do this for a living, get the MGW Pro-Sight because of the need to support a variety of pistols. For people like me who have an occasional sight to do with a supported pistol, go with the Wheeler.

I hope this helps you out.

3/12/24 Update: The Wheeler is still working just fine. I have no hesitation recommending it.


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.



PSA Has a Good Deal on the SIG P365 Tac Pac With 3 12-rnd Mags and a Holster

Folks, Palmetto State Armory has a deal going on where you can get one the excellent SIG P365 pistols in what they call a “Tac Pac”. Normally the Tac Pac just has a couple of mags but this deal includes three real SIG 12-round mags that often go for $35-45 each and a combination Inside the waist band (IWB) or outside the waist band (OWB) holster.

This is the PSA deal. Note, the photo in the ad shows a 10-round magazine loaded and the three 12-round magazines but to be clear, the deal is for three magazines and not three plus one. The photo at the top of the post is my personal P365 with a 12 round magazine inserted.

The Sig P365 is rated for +P 9mm ammo and is my every day carry. I can tell you that I have never had a failure to feed or extract with the pistol and have fired Hornady Critical Duty +P, Federal HST +P, all kinds of 115gr and 124gr FMJ ball ammo, etc. It just east whatever I give it and is reliable – that’s why I rely on it to protect my family when we are out and about and discretion is required – it’s an ideal concealed carry pistol.

I really like the 12-round magazines. The small plastic fitting on the bottom is ideal for my to put my pinky finger on and I wear size XL gloves. The 10 round magazines are even shorter. Most of the time I am carrying using a 12 round magazine. They do make a 15 round magazine but that sticks out a tad more than I care for.

Note, go for real SIG magazines. Some of the aftermarket ones, such as Promags, don’t get as good of reviews.

I can’t speak first hand to the holster they are including though – I use a soft Desantis 106 IWB holster and a High Noon shoulder rig. Given the holster is from SIG, I would expect it to be good enough to get started with.

At any rate, it’s a very good deal so click here to learn more.



Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.



The following are various listings for SIG P365 pistols and accessories so you can scroll through and look at prices.


SIG P365 Video Reviews Of This Excellent Concealed Carry Pistol

In the last post I told you that the SIG P365 is my concealed carry pistol of choice. I thought you might like to see some videos to see what others have to say as well.




And here’s one from SIG directly giving you an overview:


So you get the idea. It’s a pretty cool little pistol for concealed carry! If you are thinking about picking one of the models up and some magazines, the below links can take you to various seller’s web pages:


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.



The SIG P365 Is My Concealed Carry Pistol

Given my work with tactical weapons I guess folks expect me to carry some exotic pistol. My every day carry (EDC) is a SIG P365 that I picked up some time in the early Summer of 2019 from my friend and FFL, Scott Igert who owns Michigan Gun Exchange. I don’t claim to be a concealed carry expert but Scott is. As a retired police officer and trainer, Scott knows his way around firearms.

He and I have known each other for years and he knows what I like. After I got my Michigan Concealed Pistol License (CPL), I asked him what pistol he would recommend given my preferences. He thought about it for a few seconds and then recommended that I take a look at the SIG P365.

The P365 trail blazed the category of micro-compact 9mm semi-auto pistols that was rated for +P ammo. The designers intended it to be very small, reliable and pack a punch. I’d say they succeeded. Yeah, there have been small pistols in the past but they had some very anemic chamberings and/or were low capacity such as the single or double-barrel derringers that could larger calibers.

The P365 has received a ton of rave reviews including Handgun of the Year from Guns & Ammo in 2018, NRA Golden Bullseye Award 2019, Ballistics Best Winnter 2018, 2018 Industry Choice Award and more. The reason is simple – it small, light, reliable and can deliver a hell of a punch.

The Magazines

The P365 has a novel way of stacking the rounds inside the magazine wherein the can fit 10 rounds in a very short magazine. The pistol comes with this 10 round magazine but you can also get 12 and 15 round magazines as well.

My P365 with the three magazine sizes – From left to right: the 15, 12 and 10 round models plus you can see the Desantis #106 Sof-Tuck holster that I have been using for a few months now. I like it more than Kydex because it doesn’t poke me.
Here’s a close up of the three sizes of magazines. I own two of each so I have a lot of flexibility in terms of what I am going to carry. That’s Hornady Critical Duty 135gr +P ammo peaking out.

I wear XL-size gloves and the pistol with the 10 round magazine has a very short grip. It’s not comfortable for me and I wouldn’t target shoot with it but it makes for a very concealable pistol. I was told once that the best pistol in the world will not save you if aren’t carrying it for whatever reason – it’s too heavy, it’s too long, it sticks out, etc. My point is that there do need to be trade-offs at times. There are definitely times I carry with the 10 round magazine due to the weight and size reduction.

Here’s the P365 with the 10 round magazine installed.

For me, the 12 round magazine is ideal. It’s just a tad longer and they’ve added a small grip extension to the bottom. This is what I use most of the time because it adds just a bit more weight and size plus I find it far more comfortable to hold.

They do offer a 15 round model and while I may have it as a backup somewhere, it is longer and heavier than what I really want to carry around. I have carried with it but rarely. The nice thing besides the higher capacity is that you basically have a full-sized grip.

Here’s the P365 with the 15-round magazine inserted. Plenty of grip space but it is heavier and longer.

The Holster

I’ve experimented with a few holsters and the most comfortable one I have is the Desantis Sof-Tuck model 106NA8JZ0 – this is the right handed model at it first the P365 and P365 SAS (the model with recessed sights and a ported barrel).

What I like is the softness – it doesn’t poke me when I sit down, bend over, etc. It keeps the pistol secure in my pants and really meets my needs for a basic holster.

Here’s a closer view of the Desantis #106 Sof-Tuck holster and the belt clip.
Here’s what I had with me the other day – you see the P365 in the holster with the 12 round magazine, one of the Streamlight 66608 350 Lumen USB rechargeable lights and a Kershaw 1600 Chive pocket knife. In the back are spare mags that were in the car.

Ammunition

What I am using is Hornady Critical Duty 135 grain +p ammo. Yes, it is rated for +P ammo but I wouldn’t shoot it all the time at the range. Critical Duty is not for everyone as it is designed with a degree of barrier penetration in mind. (Hornady has a nice summary on their website if you are interested click here.) I have run a number of types through the P365 including Federal HST 124gr and a variety of 115gr FMJ loads and the little pistol handled them all just fine.

I really want to put one thing out there for you to bear in mind though – always, always, always test your pistol with the ammo and magazines you plan to use. I can’t tell you how many times I have seen a pistol not function correctly due to some combination of magazine and ammo but work perfectly fine with others. Sometimes folks new to shooting don’t realize this and it would be devastatingly bad in a self-defense situation to have your pistol jam when it tries to cycle.

How many rounds should you try? You’ll get a ton of answers on this. Statistics would tell you that at least 30 rounds is a fair sample and going past that is better in my opinion. Some guys will tell you 100 rounds, some will say 200 … they are all right in my honest opinion – shoot as much as you need to in order to become familiar with your pistol and that a given combination of magazines and ammo is going to work.

Also, to put it bluntly, shit happens. Practice clearing your pistol plus slapping in a new mag and continue firing. You just never know and if you’ve not practiced enough you are liable to fumble around under stress.

If you’d like to check out some video reviews, click here.

Summary

Again, this is my concealed carry that I entrust my family’s safety to. My Glock stays at home now because the little SIG is easy to carry, reliable and packs a punch. The P365 has proven to be so wildly successful that SIG released a larger XL model plus the SAS that has integral sights and barrel porting. While I don’t have first hand experience with them what I hear is very favorable and I definitely recommend the P365 to folks looking for solid concealed carry pistol.


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.