Tag Archives: Jet II

Update on the Hatsan Jet II – It’s Pretty Wicked!

I wrote a series of posts about purchasing a .22 Hatsan Jet II right after I bought it in early January 2022. After shooting it for a month I have some feedback to share.

I’d guesstimate I have just over a 100 rounds through it. I’ve changed quite a few 7 round mags – that much I know for sure. The first thing I want to tell you is that the performance and reliability are surprising. It reinforces to me that Hatsan can turn out some great airguns.

The Shroud Is True

I was a little worried about how true the shroud would be relative to the center of the barrel’s bore. In my Gladius, it was not. With the Jet II, it is. The way you can tell is that pellets are landing all over the place because they hit the adapter or somewhere in the moderator and spin out of control. In other words, accuracy is horrible until you remove the moderator and/or the adapter. The DonnyFL 1/2-20 male to male adapter screwed right and then the Hugget Sniper to it and accuracy was great.

Accuracy

Speaking of accuracy – I was very happy. Once I dialed in the scope I had no problem shooting 1/2″ 7 round groups using 18.13 JSB Exact Jumbo Diabolo pellets at 12 yards from a bench. To be clear – just me resting my arm on the bench. I didn’t have a true rifle stand.

That is 7 rounds of .22 18.13gr JSB Exact Jumbo Heavy Diabolo pellets at s12 yards. Ignore the blatant flier – that was my fault, not the gun’s or the pellets. I was firing supported from a bench but the Jet II was not in a bench rest. I’ll do some accuracy testing one of these days.

Now, another form of accuracy is to tell you about squirrells. I have cleanly dispatched 8 over the last three weeks. Distances vary from 12-16 yards.

The Jet II really likes these pellets. I really like JSB in general for all of my pellet guns.

The Charging Handle

In my first review I voiced a concern about the polymer charging/cocking lever. So far, it has worked just fine – no signs of any loosening or bending.

The cocking handle is doing just fine.

Air Use

I purposefully bought the Jet II due to the larger air reservoir than the Jet I. I could shoot two mags with no noticeable change in trajectory in my 12 yard test range shooting 18.13 JSB Exact pellets.

My usual approach is to shoot a mag and then top of the Jet II from my air tank at the same time I reload the pellets in the magazine. I have a spare magazine ready to go so if I was in a rush for some reason I know I have a little bit of buffer just in case I need it – I’m using the gun for pests and not target shooting.

I had it filled pretty close to the 250 bar max. What you see is the amount of air left after 14 shots (two magazines). I have not tried shooting more than two mags after refilling.

Snipe Moderator

I’m using the Hugget Snipe moderator and it almost makes the Jet II backyard friendly. It’s far quieter with it of course – I just wish it was quieter yet and will experiment some more with different cans.

The Hugget Snipe does a very good job. I wish it was even more quiet but that’s not really a negative reflection on the Snipe.
With the Snipe, the overall length is approximately 30″. From an overall length perspective, it’s a great combination.

Summary

At this point I am still very happy with the Jet II for it’s intended pest control purposes. It’s definitely effective and amazing for the price when you stop and think about it.

Here’s the listing at Pyramyd Air and I always recommend you use their 10 for $10 test service:

Hatsan Jet II 0.22

Hatsan Jet II 0.22

Hatsan Jet II Convertible PCP Pistol

Convertible pistol or rifle Includes removable synthetic stock PCP Two 40cc air cylinders fill to 3,625 PSI/250 BAR Shots at optimal velocity*: 48 (.177), 42 (.22), 30 (.25) Magazine capacity: 8 rounds (.177), 7 rounds (.22), 6 rounds (.25) Integrated manometer Max. velocity (lead-free): 810 FPS (.177), 700 FPS (.22), 611 FPS (.25) Max. velocity (lead): 788 FPS (.177), 700 FPS (.22), 608 FPS (.25) Max. energy: 9.7 FPE (.177), 15.6 FPE (.22), 16.5 FPE (.25) Length-adjustable buttstock Elevation-adjustable cheek rest Ridged rubber buttpad Flip-up fiber optic front sight Flip-up adjustable fiber optic rear sight 11mm Dovetail optics rail Picatinny accessory rail Barrel length: 7.9" Overall length (pistol): 15" Overall length (rifle): 22.8"-24.6" Overall weight (pistol): 2.4 lbs. Overall weight (rifle): 3.4 lbs.

* – within 85% of peak velocity.



Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.