A ferrule is a metal end cap found on some wood grips and handguards to protect the end grain of the wood from being hammered and splitting open. They were used on different country’s weapons and are usually not interchangeable between countries. For example, Bulgarian and Yugo ferrules are different.
Near and dear to me are the metal ferrules on Yugoslav / Zastava wood lower handguards. The following photo shows a M92 lower and the black metal cap is the ferrule. This ferrule does not fit everything Yugo – just the M70, M85/92, and M77. The M72 and M76 are unique sizes.
You have three options when you need a ferrule: 1) Find a used one and this is real hard – try posting in the Marketplace of http://www.akfiles.com and see if they have one. 2) Buy a replica ferrule from us or 3) Simply pry the old ferrule off, put it on the new handguard and the squeeze the tabs shut again with a pair of pliers.
Note if you are putting it on one of our plastic handguards either just set it on it with the ears closed or glue it in place. Absolutely do not try to squeeze the ears shut — the little metal divots will not dig into our plastic and you risk snapping the handguard tabs. Again, either slide it on or glue it in place with something like rubber glue or Goop that you can later remove if you want. Epoxy works too but it is pretty permanent.
For example, I just slid the ferrule on the M70 bulged handguard in the next photo.
We manufacture ferrules that fit the Yugo/Zastava M70, M77, M85 and M92 lower handguards. Note, they are specific to those models and will not fit other nationalities or models.
Click here to visit our store with the ferrules for sale.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at firstname.lastname@example.org. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.