We have a lot going on so you may want to either use the categories list in the left navigation bar to go to certain areas, use search in the upper right or look at the list below of posts from the newest to oldest. Click here for our dedicated data and analytics reports section.

Would you like to be notified by email when new reports publish? There is a small subscription form in the top of the left navigation bar.

• Getting the Simplicity Broadmor 16 Hydro Lawn Tractor Ready for the Season – Air and Oil Filters via Amazon June 6, 2018
  Given we live in a rural area, it can be a challenge trying to find the right air and oil filter for our Simplicity Broadmor 16 Hydro tractor.  It has a Kohler engine and the air and oil filters are readily available on Amazon.   It makes life way easier to just order them.  Sometimes I’ll ...
• Fixed a Starting Problem on my Simplicity Broadmor 16 Hydro Tractor June 5, 2018
  We bought this Simplicity Broadmor 16HP lawn tractor back around 1999-ish and it has served us well.  In the years since, I’ve had to replace a few parts and figure things out as the dealer went out of business.  Luckily, finding parts is pretty straight forward given the WWW and Amazon. At some point last summer, ...
• Our New Polish Beryl Gen 2 Grip Model May 19, 2018
  The karabinek szturmowy wzór 1996 Beryl rifle is manufactured by the Łucznik Arms Factory in Radom, Poland and is the successor to the Tantal.  The first versions of the rifle had a rather typical AKM style grip. With the kbs wz. 1996C Beryl variant, an ergonomic grip appeared that looked very similar to what the Israelis developed for ...
• Check Out Joe’s Cool AMD-65 With Our Dark Russian Plum AMD Grips May 14, 2018
  Th e Hungarians made an interesting variant of the AK known as the AMD-65.  It had a folding stock, short barrel, unique muzzle brake, a front sheet metal handguard that is lower only, a gas tube that doesn’t have retainers for a gas tube cover (because it doesn’t useone) and, finally, the AMD-65 used two ...
• Zastava O-PAP Rifle With One of Our Yugo M70 Grips May 13, 2018
  This is John’s Zastava O-PAP.  You can tell because it notably does not have the flip up grenade sign on the gas block.  It definitely has clean lines and you can see the bulged trunnion that is another clear indicator that this is the heavier duty O-PAP and not the N-PAP. John’s rifle has one of ...
• Great Step-by-Step AR Assembly Book For Novices – Very Well Done May 12, 2018
  Hey folks, if you are looking for an affordable book on how to assemble an AR rifle that is step-by-step with a ton of photos – check out Rob Reaser’s book “AR-15 Rifle Builder’s Manual: An Illustrated, Step-by-Step Guide to Assembling the AR-15 Rifle”.   I bought this because I have the Amazon Kindle app on ...
• Check Out John’s O-PAP With Our Bulged Handguard May 12, 2018
  John’s Zastava O-PAP looks good with our Bulged M70 handguard set. Click here to open a new tab for our webstore page with the Bulged M70 handguard set.  
• Our New Russian AK-12 Grip May 7, 2018
  Hi folks, We have a new grip model based on the Russian AK-12.  Our grip has a very similar outward appearance and profile to the Russian grip but is cast solid and is made here in Michigan by us.  As a result, it counts as a 922r compliance part also. The rifle is my personal FM-AK47-21 that ...
• Mark’s M92 SBR With Our Yugo Grip May 6, 2018
  Mark’s SBR sure looks great!  He used the original wood furniture and one of our Yugo M70/M92 grips with a black blasted finish. Here is a link to our grip’s order page – click here to open it in a new tab.
• Shooting the 7.62×51 PTR PDWR – So Cool! April 22, 2018
  Folks, the PTR PDWR is a fun gun!  Yeah, I said the “gun” word because it just fits.  After taking the time to lubricate and clean the pistol as I wrote in the last post, my two brother-in-laws and I took it out to the range. Plain and simple, it ran like a top.  We did ...
• Lubricating the PTR PDWR and Cleaning the Barrel April 15, 2018
  The last step in preparation for my first trip to the range was to clean and lubricate the PTR PDWR.   One thing I learned with my for PTR was that proper lubrication makes a world of difference and I could tell in working the PDWR that it definitely need lubricating so here’s what I did. Also, ...
• Fixing a Bent Sight and Cocking Lever Tube Bur On The PTR PDWR April 14, 2018
  Okay, when I received the PTR PDWR I did a quick inspection and noticed two small problems that needed fixing.  I’m a bit disappointed that PTR quality control did not catch these two items but they are small issues. First, the front sight blade was bent sideways – to canted, bent.  I’m not sure how this ...
• Adding a Vortex 1-6×24 Strike Eagle Scope to the PTR PDWR April 11, 2018
  I really prefer an optic on my firearms at this point.  The PTR PDWR is a relative short range pistol so I figure post of my shots will be within 100 yards.  It could certainly shoot further but, based on what I have read so far, the accuracy goes down hill fast. While some might consider ...
• Adding a Brace and Changing the Forearm on the PTR PDWR April 10, 2018
  In the last blog post, I talked about the specifications and ordering the PTR PDWR.   Even before it arrived, I knew I wanted to add a brace.  My plan was to use PTR railed handguard and I had a “wait and see” attitude towards the brake. So, the first step was to remove the existing end ...
• The PTR PDWR – A Compact .308 Powerhouse April 9, 2018
  As you know, I really like AK firearms but I also like firearms based on the HK roller lock design.  Maybe 3-4 years ago I owned a PTR-KMF4R and it was very accurate and I also learned a lot in terms of maintenance, tuning, etc.  Of course, I had to mess with it and add ...
• Improving the Feed Reliability of the Rock Island 52000 10mm 6″ High Cap Pro Match Pistol April 7, 2018
  As some of you may know from a previous post I did, my Big Rock would not feed Underwood 10mm ammo. Neither Armscor/Rock Island nor Underwood helped resolve my issue though Armscor did take the pistol back and tell me there was nothing wrong with it – probably with FMJ ball ammo. At any rate, the ...
• How to Remove Old Cosmoline and Grease or Even Free Up Rusty Parts The Easy Way April 7, 2018
  We’ve all had parts come in with really dried out preservative on it such as grease or cosmoline.  I bought some 100 year old khukuri blades that were coated in dried out grease and realized this was a great time to take some photos.  There’s a way to get all this crud off very easily ...
• Firearms Lube Tip – Use Mobil 1 Synthetic 5W-30 Oil and The Right Dispenser April 6, 2018
  I’ve been experimenting with different lubricants for a year now because a lot of the firearm “oils” are 99% marketing and 1% oil at a premium price.  You’ll notice that how to lube a firearm is a religious argument for many and I’m not going to get into that. After doing a lot of digging, I ...
• How to Upgrade Mini Maglites to LED, Replacing the Lens and Adding a Switched Tail Cap March 29, 2018
  Okay, I have to admit it up front – I’m nostalgic.  When I was a teenager in the 1980s Maglites were a big deal.  I had a four D-Cell unit and a friend encouraged me to get a Mini Maglite probably in the 1985-ish timeframe and I have used it a ton. I also bought a ...
• Yes, 922r Does Apply to Short Barreled Rifles (SBRs) March 18, 2018
  Please note that I am not an attorney and this does not constitute legal advice. The topic of 922r compliance and parts counts came up the other day as whether it applies to Short Barreled Rifles (SBR). In reading the conflicting ATF documentation, the last guidance given in technical branch letters from 2009 and 2010, the ...

• <<
• 1
...
• 30
• 31
• 32
• 33
• 34
• 35
• 36
• 37
• 38
• 39
• 40
...
• 48
• >>