We have a lot going on so you may want to either use the categories list in the left navigation bar to go to certain areas, use search in the upper right or look at the list below of posts from the newest to oldest. Click here for our dedicated data and analytics reports section.

Would you like to be notified by email when new reports publish? There is a small subscription form in the top of the left navigation bar.

• Polish Build Runs Like a Top July 10, 2018
  I will do a more In-Depth series of posts about building this rifle later. It is a Polish WBP kit l at the heart from arms of America with a Polish cold hammer-forged Barrel. The internals are installed in a Childers Guns receiver. The trigger is from ALG and I absolutely love it. I kid ...
• I Loathe Telemarketers, Robo Callers and Unwanted Callers July 10, 2018
  Simply put, I hate telemarketers and robo callers and unwanted callers. I pay for my phones and they should have no legal right to intrude on my time. The phone will ring and I will go rushing to answer it or stop working on whatever project just to find out it is an unwanted caller. ...
• Valvoline Max Life ATF Works Great in 2002 Toyota Camry XLE July 9, 2018
  We are a Toyota family and most of our cars were bought either used or very used from private parties.  At any rate, a few years ago I bought a 2002 Toyota Camry XLE with a 4-Cylinder engine.  The other day my older daughter said it was making a funny noise in reverse so I ...
• Very Compact Astro 1828 ONYX 3/8″ Nano Impact Wrench Is Great For Tight Quarters July 8, 2018
  This past winter I had the fun of changing the starter motor twice in 15 degree weather in my Landcruiser.  It was a bear getting to the starter bolts with my full size Ingersoll Rand 1/2 Thunder Gun.  It’s an awesome impact wrench and I had trashed a few cheap Harbor Freight ones before taking ...
• Check Out Jeff’s Cool M72B1 Built by Two Rivers Arms With Our Handguard Set July 3, 2018
  Check out Jeff’s cool Yugoslavian M72B1.  It was built by Two Rivers Arms and he used our custom Yugo M72B1 handguard set.  Our handguards are made from a special temperature resistant glass reinforced urethane, don’t require the ferrule, and enable a sure grip. If you are interested, click here to learn more about our custom all ...
• The Hatsan Gladius Long Precharged Pneumatic (PCP) Air Rifle and Hill Mk.4 Air Pump One Year Later July 2, 2018
  I’ve had this Hatsan Gladius Long PCP rifle in .22 caliber and Hill Mk.4 air pump for just over a year now and am very pleased with it for pest control. I have a few observations to share but first if you wish to read any of the original posts, here are the links: Hatsan Gladius ...
• How to Adjust an Uzi Top Cover and Fix a Bolt Blocking Latch Problem – Uzi Would Not Fire July 1, 2018
  I built an Uzi a few months back and had trouble with it firing. A challenge a person has in the firearms industry is finding time to enjoy shooting! At any rate, I took it out the first time and had really light primer strikes with the firing pin – I’m talking you could barely ...
• How to Clean Up Oil On A Cement Driveway June 30, 2018
  I’m a gear head and am always working on a car or tractor it would seem.  Like many, I have a concrete drive way and it seems like no matter how hard I try, I get engine oil, grease, gas or whatever other crud on the cement. I’ve seen guys post asking about how to get ...
• Finding Parts and Accessories for Norinco Firearms June 30, 2018
  Because I make and sell a variety of AK furniture, I often get asked about where to find parts and accessories for a given type of firearm.   One brand that comes up quite a bit is Norinco. Norinco, or China North Industries Group Corporation Limited (中国北方工业集团有限公司), is a huge defense conglomerate and makes everything from small arms to ...
• Got a Hogue X5 3.5″ Pocket Knife with a Wharncliffe Blade for Father’s Day!! June 24, 2018
  Well, my wife sure surprised me this year — she bought me a Hogue X5 pocket knife (SKU 34569) at Smoky Mountain Knife Works when we stopped at the store on Father’s Day. I carried it every day until we returned home on Wednesday.  For some reason I did not get more photos of the ...
• The Vortex Torque Wrench Optics Mounting Kit is Wicked!! June 24, 2018
  I’m to the point with rifles that when I want to maintain accuracy, I know I need an accurate torquing driver.  For years I used the Wheeler Firearms Accurizing Torque (FAT) Wrench and it was good enough.  For about $40 I got the base unit that included a few bits and a case.  The FAT ...
• Tailoring Plano’s New 52″ All Weather Series 2 (AW2) Case For a 48″ OAL .338 Lapua Savage Stealth Evolution June 22, 2018
  It’s funny how a person’s views can change over time.  When my dad I first started going to gun shows back in the early 1980s, my idea of a gun case was a naugahyde bag that was long enough with straps that I could close on the rifle.  Then again, my budget was about $10-20 ...
• Cool New Soviet KGB Vodka Flasks – Awesome Conversation Starters June 19, 2018
  So I was surfing one day and stumbled across these cool souvenir personal liquor flasks from Russia that hark back to the Soviet era.  They looked really cool in the photos and were brand new so I figured why not get one and check it out.  Thus, out came the credit card and I got ...
• Why I Stopped Using Harbor Freight Air Fittings June 18, 2018
  In short, Harbor Freight quick couplers look like a cheap way to go.  The problem is that they are really soft.  I can’t even guess how many female fittings I have thrown away as they deformed and started to leak air. The same goes for the soft male fittings.  You will find they abrade easily and ...
• Resurrecting a Gummed Up Air Tool Without Disassembly June 18, 2018
  Recently I got out my Ingersoll Rand model 117 air hammer to use and found out its action had gotten all gummed up.  It’s been probably a year since I last used it even then probably didn’t use it a ton.  I always drip air tool oil into a tool before use because my air ...
• Use an Air Riveter to Install or Remove AK Barrels June 18, 2018
  For years I used my 20 ton press to remove and install barrels on AK rifles and then somone, Gunplumber maybe, told me to try using an air riveter instead.  You know what, it surprisingly works well and now I only use my press on the removal of really stubborn barrels. I am going to throw ...
• Learn About The Type 2 Soviet AK-47 – Forgotten Weapons Video June 10, 2018
  It’s interesting that we hold the AK-47 in near mythic regard when it comes to reliability.  It took almost 12 years from 1947 to the release of the AKM (Avtomát Kaláshnikova modernizírovanny or  “Modernized Kalashnikov Automatic Rifle”) in 1959.  The journey the design team made over the years is quite interesting. I did a post on the ...
• Learn About The Original Type 1 Soviet AK-47 – Forgotten Weapons Video June 9, 2018
  Ian McCollum does a great job showing an actual Soviet Type 1 sheet metal AK-47.   I’ve read about the Type and seen a few photos but nothing as detailed as this.  We so often focus on the AKM but Mikhail Kalashnikov and his design team at Izhevsk had to go through a lot of learning ...
• The Romanian PSL Rifle – Feeling Nostalgic for the 7.62x54R DMR June 8, 2018
  I have to admit that I am a huge fan of Ian McCollum’s Forgotten Weapons videos.  On May 28th, 2018, he released “Romania Doesn’t Make the Dragunov:  The PSL”.  Being a fan of the PSL, I had to watch it: As usual, Ian did a great job.  The PSL, or in Romanian, the Puşcă Semiautomată cu Lunetă ...
• Customizing and Shooting the Pakistani Ordnance Factory POF-5 Pistol June 6, 2018
  Having watched one too many TV shows and movies with H&K’s MP5 submachine gun over the years, the sub gun has been on my “I want to have one list” for years but way out of my price range.  While surfing, I read about how Pakistani Ordnance Factory (POF) licensed the design and tooling necessary ...

• <<
• 1
...
• 29
• 30
• 31
• 32
• 33
• 34
• 35
• 36
• 37
• 38
• 39
...
• 48
• >>