Adding Hogue Rubber Grips to my 10mm TRP Operator Longslide

After I finished polishing the chamber of my new 10mm TRP Operator Longslide, I also replaced the VZ Grips. Maybe it’s my carpal tunnel but I really prefer rubber grips on my single-stack 1911-style pistols. Fortunately, the Hogue 45000 wrap around rubber grips fits great.

The VZ-Grips that come with the TRP are very nicely executed. Replacing them is as easy as removing the two Torx screws you see on each side.

Replacing the Grip Panels

I did some digging and the Hogue 45000 rubber grips are a drop in replacement rubber grip set for Colt-Government size frames including Springfield Armory pistols. Sure enough taking them out the package they lined up just fine.

To remove each panel, you will need a Torx 15 (T15) bit and I would recommend a container to hold the screws. I like using a magnetic tray to avoid them bouncing around.

My factory screws backed out using a T15 bit and I was surprised that there was no threadlocker or much torque..
You have to love the easy stuff when it comes along. The original grips lift off the threaded inserts and then you slide the Hogue into place until the holes align. Yeah, it’s that easy.
When you go to re-install the screws, use a medium-strength threadlocker. I’ve been using the Loctite “stick” series for a while now as you avoid the traditional liquid making a mess as it drips. Would the liquid work – for sure. The stick is just convenient. In terms of torque, I just brought them down snug.

On the topic of grip screws, you have some options to avoid lost screws. First is to use a medium-strength threadlocker and another is to put an O-ring under the head of the screw. Some guys use #61 plumbing O-rings and others use 1.5x3mm Buna-N O-rings. I’d recommend one of the two vs. nothing.

The Hogune 45000 is an easy install. If you are wondering about the Wilson 47NX 9-round mags, I really like them too.

Conclusion

The pistol passes testing with flying colors – it now cycles fine, the slide and everything operate very smoothing during manual testing and the grip makes a huge difference for me in terms of comfort. Now, I just need to get some range time 🙂


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at info@roninsgrips.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.


Sources For the 10mm TRP Operator and Ammo

Here are some reputable vendors you can order either the 5″ or 6″ TRP Operator plus ammo: