The Century Zastava PAP M77 in .308 - With Battleworn Furniture

Years ago, I had a Zastava M77 and regretfully sold it back in 2014. It was one of those situations where I had to sell it to fund other projects but I didn’t even get a chance to shoot it. I also had a custom M76 (the 8mm version) for a while but I did sell that one – mainly because it was a primer popper. That is a known issue because the firing pin hole opened up out of spec due to corrosive ammo use and didn’t adequately support the primer as a result but I digress.

I had resisted buying another one until Zastava decided to release what they called the “Battleworn” model (ZR77308W) and I caved. On one hand, it comes with some really nice retro looking Europen beech wood furniture. What really got me was that it was way cheaper than their other models that had optics and/or polymer furniture at that time.

Why the M77?

So, I had wanted to get back into the Zastava designated marksman’s rifle (DMR) game for a while and was just biding my time. The reason I wanted the M77 was due to all of the quality match 7.62×51 and match .308 match ammo that is out there. In comparison, try finding affordable true match grade 8mm ammo for the M76 or match 7.62x54r for the M91. You can find it once in a while but it’s not cheap and choices are limited here in the US. On the other hand, match 7.62×51 and .308 plentiful and affordable.

So, the main reasons were the ammo and the second was the M77 Battleworn model being very affordable in the Late Summer of 2023. As I am writing this, a quick search on GunBroker shows the Battleworn model selling fro $1369 with one 20-rd magazine up to $1,499 with five 20 round mags plus the various models are a lot closer in price. I paid less last summer but you get the idea. (In 2014 I bought a M77 with a thumbhole polymer stock and polymer handguard set for $600 or 700 from Centerfire Systems but that’s the way pricing goes – any vendor will raise prices to what they think the market will bear to try and maximize profits.)

Taking a Closer Look

It’s well packed in an egg foam box. Note the CSSpecs 25 round magazine on the box cover.

Honestly, the wood is really nice. It’s very reminiscent pf the M76 wood with a few minor exceptions – the grip does not have a ferrule, the recoil pad uses allen head screws and the stock bolt is one of their modern commerical shorter ones vs. the long Yugo military 8x1x260mm (about 10.23″ long).

Like many aspects of the original designs, the Yugoslavs modfield their scope rails and how they mount The result is more to the rear and is often refered to as “rear-biased” so they need a scope mount vs. an AKM pattern rail.

Honestly, the wood is cool. It has almost rough hewn look but better finished if that makes sense. The grip reminds me of one that Matt Shuster of Ironwood Designs came up with many years ago before he passed. I think he called it the “mini fat cap” – if someone remembers, please tell me. He made the M76 Fat cap patterned after the original wierd awkward really fat but oddly short M76 grip but without a ferrule. Then he came up with a far more elegant smaller one and this Zastava design reminds me of it. Folks, Matt helped me get started years ago and was a genius with wood. God rest his soul and take care of his family.

It has the mile long 19.7″ cold hammer forged barrel. The silver disc on the gas tube is the three position gas regulator. It has a slant brake on it and 14x1mm left hand threads under it just like any other AK. A M76’s long flash hider is actually part of the front sight assembly but that is not the case with the M77 – you can install whatever you want. Also, note the cleaning rod.

Here’s a view of the rifle looking at the operating side. The chromed bolt jumps right out in contrast.

The M77 uses a bulged trunnion and the oversized AK receiver needs to accomadte it. These bigger 1.5mm thick receivers are beefy. They both hold the various component assemblies in position and the thicker receiver means more steel to compensate for any metalurgical or hardening shortcomings.

Zooming in on just the receiver. Note the notched selector/safety lever and the relatively tall selector stop. In the top right you can see the other side of the operating rod lock.

Opening it up

The locking dust cover was introduced in the M70 Yugo rifles because their doctrine made extensive use of rifle grenades. They didn’t want the cover top pop off so they added a sliding lock that holds the rear recoild spring assembly in place and, thus, the top cover in place. By the way, one of the really nice side benefits is that when you reassemble a rifle with one of these locks, you put the recol spring in front, install the dust cover without fighting the spring, push the button and the recoil rod pops out the back.

Looking at the locking assembl, the plunger button the operator pushes is at the bottom of the photo. The slightly elevated portion under the top lip of the trunnion (top in this photo – right side in real life looking down – is what slides out of the way wehn pressed so the recoil spring assembly can come forward for removal. What you don’t see is the hidden compression spring. If you ever need these parts, CNC Warrior make and sells both the whole assembly.

Looking down at the classic double hook AK trigger and double wound spring. I’ve had guys ask me why did they double these? The answer is fault tolerance. The second hook is there if the first should fail and the second spring winding is there should one of the two fail. In all of my years working on civilian AKs, I’ve never seen a hook fail but I have seen springs fail although very, very rare and usually from a surplus kit build.

Look at those hooks! They are forged and not stamped. The bevels in the front and the back help the bolt carrier pass by.

Here’s a better view of the three position gas regulator disc. Note the vent holes in the gas block itself.

One oversized bolt assembly. Despite what some may tell you, the PSLs and these M76/M77/M91 families of rifles are oversized AKs. The SVD Dragunovs use very different bolt carrier assemblies.

Longer than a normal AK gas pistol and chrome plated to improve corrosion resistance.

View from the side. Some of the machining is crude but effective in places.

I chuckled when I saw this. There are two numbering systems on some of the parts – crisp machined ones and ones done by hand with an electropencil like you would see on some kits.

You an see the numbers of the key parts and they should all match.

Interesting – more holes to vent propellant gasses.

A better view of the upper and lower handguard assembly,

The buttstock has the distinctive grip area like you would see on the M76 military stocks. I have never had the purpose of that grip area explained to me.

It uses a classic Yugo military sized recoil pad. What’s noteworthy is that they have ditched the old slotted screws for allen/head-head screws.

Summary

This gives you an overview of the M77 battleworn model right out of the box. Nothing really surprised me and the quality looked good. Sometimes I buy stuff and regret it but not this time.

If you know me, you also know I could not going to leave it alone and the customizations will be in future posts.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.