I recently wrote about my Glock 29 Gen 4 and carrying it while hiking. A fellow asked me for more details on what I was using to carry it ands I told him I was using a 5.11 Select Carry Pouch – which is a fancier product name than “tactical fanny pack”. Joking aside, it really does a great job.
Ok, why the fanny pack? I’m on the heavy side and when I go hiking I am usually wearing shorts or sweatpants depending on the weather. Jeans are a “maybe” but I’m at the point in life where I go for comfort. I’m sure not dressing to impress anyone.
If I am wearing jeans and can use a pistol belt then I might use a holster but it depends on the weather. I’d rather conceal the firearm vs. dealing with people staring at my pistol as we are walking along. If I am wearing a coat or open long sleeve shirt then I might wear a belt holster. My preferred option is a Galco shoulder holster.
What I find is that I am often hiking or fishing and it’s too hot for a coat or loose shirt so I had to figure out what to do. I knew a fanny pack might look goofy but would work great if I could find the right one given how it could distribute the weight while concealling the pistol.
The Glock 29 gen 4 is relatively compact but it is not tiny by any means and once you load it down with 10 rounds of 10mm and have a couple of back up mags of 10mm, you’ve got a lot of weight to deal with.
A couple of years ago I ordered in some different models of the no-name import fanny packs that claim to support concealed carry and the quality was very disappointing – light fabrics, lousy sewing and poor zippers across the board. They weren’t an option for the Glock 29 gen 4 because they would never hold up to real world use.
There are a lot of carry options out there but I think I can make the blanket generalization that you get what you pay for – you need a well thought out design, rugged materials, a rock solid zipper and these aren’t cheap.
One company I like is 5.11. Their gear is reasonably priced and has never let me down. Yes, I am getting to my point – their 51804 Tactical Select Carry Pouch is very well made, looks good and doesn’t attract attention. It’s a tight fit but I can squeeze in my G29 with the Pearce magazine base plate so I have a place to rest my pinky finger, two more 10 round mags and a Streamlight TLR-8 that I keep in a side pouch.
The main pouch is a tight fit but I can squeeze in what I need. It’s symmetrical so you can insert the pistol facing either left or right. I have mine set up to rip open with the left and pull the pistol out with my right hand.
Here’s another angle. When you have the load shown, there is very little extra space.
I keep a TLR-8 stored in the right side pouch. It’s a snug fit also.
They call that thing sticking up a “hot pull strap” that you can use to yank the compartment open in a rush. Now that folks is one heck of a good idea. If you are in a hurry and the adrenaline is kicking in, fumbling with a zipper is going to suck. Grabbing that pull strap and yanking open the pouch is very do-able.
To give you an idea of real world sizing, a G29 Gen 4 is about 7″ long andjust over 4.5″ with a regular mag. Let’s just round that to 5″ in my case with the Pearce base plates. You can see in the photos that it is a snug fit. My Sig P365 fits no problem.
Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
The Glock 29 Gen 4 offers a solid platform out of the box and for many, that is all they want. For me, after building a few Polymer80s and having a better idea of what I liked, I knew I wanted to upgrade some of the parts to personalize it plus run heavier loads.
Wait – Not The Trigger You Ask?
You may look at that list and be surprised that I left the trigger alone – yes, I did. I’ve used Zev, Overwatch and other aftermarket triggers along with other aftermarket parts like connectors, springs, etc. My personal choice, and this is just me, was to go with the tried and proven OEM Glock parts and let them wear in. I’m not shooting matches or precision targets – this was to be a defensive pistol so I wanted reliability and a trigger with enough pull that I wouldn’t have an accidental discharge. There are guys that will agree with me and ones that will strongly disagree – the trigger decision is totally up to you. Mine was to go with the original Glock trigger parts.
New Sights
The original Glock sights are better than nothing but I really do not care for them. Others must feel the same way because there are a ton of aftermarket sight vendors. By the way, go for a brand name – some are just total junk and not sufficiently rugged.
I’ve had very good luck with TruGlo and Trijicon and I tend to favor the latter more. Trijicon sights are very well designed, make aiming super easy and are incredibly rugged. I opted for the Trijicon HD Night Sights (GL1040) for large frame night sights that have an orange ball in the front and tritium illumination. I intentionally wanted a low-light sight but not to add an optic.
I used a Wheeler Sight Tool for pistol sights and really like it. Installing and removing Glock sights is a breeze with this tool. You can’t see it from this angle but I do have blue painter’s tape on the slide to protect the finish just in case.
My current tool for removing and installing Glock sights is this 2-in-1 Real Avid tool that has a pin pusher on one end and a pin pusher on the other. What makes a good tool? The little bolt you see requires a 3/16″ thin wall socket. Having a rare earth magnet at the right depth makes all the difference in the world to properly hold the bolt while you are trying to get it threaded into the sight. Cheap tools do not have the socket properly formed, don’t have a magnet, etc. The Real Avid tool gets it right. Cheap imports are just that – I’ve seen them useless right out of the box.
Done. It took me maybe 10-15 minutes including taking these photos. The right tools make it very easy.
The dots glow green in low light due to tritium inserts.
Changing The Controls
That is a Rival Arms Extended Slide Lock. An OEM Glock Slide Stop Lever and a Tango Down Vickers Tactical Magazine Catch.
I like to replace the slide lock, slide release and mag catch normally. The slide stop is actually a big problem for me as I have a hard time grabbing, even feeling, the two sides to pull it down to remove the slide. This really drives me nuts and is one thing I always replace. I installed a Rival Arms extended slide release that sticks out just enough for me to get a much better grip on it. I wish I could find the packaged but I installed a no-name unit online and it had problems from the start – the Rival Arms unit is what I went to next and am still using. Point of the story – beware of cheap parts and test your stuff.
For the Slide Stop Lever, I actually am still using the Glock unit. Normally I would replace it but had a hard time finding one that would fit a Glock Gen 4 model 29. I can use the Glock lever, it’s just not my first choice.
For the Magazine Catch, I went with a Tango Down Vickers Tactical model. I’ve used these a number of time of times now because I like how it sticks out just a bit more than the original but not too much. I’ve tried ones that stick out so far that if you even lay the pistol on its side, the catch is depressed enough to release the magazine and then the next round fails to feed because the mag isn’t properly seated.
The Vickers Tactical Magazine Catches are really my preferred unit these days for Glocks and Polymer80s.
Recoil Spring Upgrade
The stock Glock 29 spring is rated for 17 pounds as I understand it. To better run the hotter loads from Buffalo Bore and Underwood, I wanted to put in a stiffer spring but I wasn’t exactly sure what to go with. This helps with obtaining both higher and more consistent velocities with these loads. Yes, the OEM recoil spring will still work – this is an improvement is all. However, if you run too stiff of a spring, your pistol may not cycle reliably with other loads you want to run.
Wolff Gun Springs makes this decision super easy for you. They sell what they call a “Recoil Calibration Pak” with springs at 17, 19 and 21 pounds. They have a variety of these assortments for different Glock models as well.
To install the spring, you need to get a two piece guide rod assembly and Wolff sells them as well. The native Glock springs are in a captured assembly that really isn’t designed to come apart. The Wolff guide rods make it super easy for you to try different springs and do not affect accuracy or reliability in terms of the rods themselves.
That is the Wolff two piece guide rod and springs. It’s worked great so far.
I installed a 19 pound spring and found it functioned just fine with all of my Buffalo Bore, Ammo Inc, S&B, and Underwood loads. That’s what I am running at this point and haven’t had any reliability issues so far.
In Conclusion
The pistol is configured the way I want it and as reliable as ever. The end of the day, what you do is your choice but just be sure to test your combinations (the new parts, magazine and ammo) before you rely on them.
Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
I’ve never been a huge Glock fan preferring 1911 & 2011 pistols. A few years ago I built a few Polymer80 pistols and that chipped away at my dislike because the engineering was really very cool. In terms of calibers, I mainly focus on 9mm and 10mm these days – the former for general self -defense and shooting at the range and the latter for defense including potentially black bears. The problem I’ve had for the past year is that my 1911 and 2011 10mm pistols weigh quite a bit and are large. With this in mind, I started hunting around for a smaller 10mm that would also given me at least 10 rounds of ammo in the magazine. This brought me to Glock and either the full size model 20 or compact 29. I opted for the latter because I wanted something smaller and easier to carry concealed.
First, Why 10mm?
I suppose the first thing that made me even consider a G29 is that it uses 10mm and I am a big fan of the 10mm cartridge. Folks, it hits hard. It’s not a magnum but it does pack a wallop substantially beyond what a 9mm can do while feeding from a semi-auto.
My plan was to use this pistol when hiking in the back country for self-defense from someone with malicious intents or a black bear. This was not to be my every day concealed carry pistol and while I do have quite a selection of hollow points (HPs), my plan was to load the pistol up with ammo designed to penetrate, not to mushroom like a HP bullet does.
While I have carried my Sig P365 on many hikes mainly because it’s small and lightt, let’s compare some rounds between 9mm +P and 10mm so you can get an idea:
9mm +P Penetrating Rounds
Muzzle Velocity (FPS)
Muzzle Energy (Ft/Lbs)
Hornady 9mm Critical Duty 135gr +P
1,110
369
Hornady 9mm Critical Duty 124gr +P
1,175
380
Buffalo Bore 9mm Outdoorsman 147gr Hard Cast +P
1,100
394
Underwood 9mm 147gr Hard Cast +P
1,100
395
Underwood 9mm 115gr Xtreme Penetrator +P
1,250
399
10mm Penetrating Rounds
Muzzle Velocity (FPS)
Muzzle Energy (Ft/Lbs)
Buffalo Bore 10mm Dangerous Game 190gr Mono Metal
1,100
510
Hornady 10mm Critical Duty 175gr
1,160
523
Buffalo Bore 10mm Outdoorsman 220gr Hard Cast
1,100
591
Underwood 10mm Hard Cast 200gr
1,250
694
Underwood 10mm Hard Cast 220gr
1,200
704
So if you want to read more on the ballistics of 9mm, 10mm or comparisons, there are tons out there by people who know far more than I do. You may also argue that Critical Duty was never designed for dangerous game and you are right but I wanted to give some comparisons mainly about the energy levels. Bottom line for me is that 10mm hits a lot harder and penetrates further based on lots of examples I have seen of 10mm rounds being fired into ballistic gelatin, phone books and real world self-defense stories against bears that you can search and read about.
This is one of Underwood’s Hard Cast 220 grain 10mm rounds loaded in one of our custom double stack mags for RIA 10mm and .40 S&W pistols [Click here to learn more about our magazines]
But Why Glock?
I’ve not been a Glock fan to be perfectly honest. I preferred 1911/2011 pistols and CZ-75s to the Glocks mainly because of the grip angle and a bit of a bias against the blocky boring lines of the factory Glock pistol.
What is cool about Glock? First and foremost, the Glocks are amazingly reliable pistols. They are going to work when you need them to work. Note, you still need to clean, lube and thoroughly test them before relying on them but this is true of any firearm. A pet peeve of mine, maybe it’s even a fear for the safety of others, are the people who are new to any type of firearm, buying one and ammo from the store, loading it straight out of the box and then thinking they are safe – Please, don’t do this.
Second, Glocks do not weigh a bunch because of their polymer frames. My Desert Eagle 1911 in 10mm is an amazing pistol – easily the best factory-built 1911 pistol I have ever bought but it is not light. Unloaded it comes in at 36.2 ounces – folks, that is just over two and a quarter pounds!! In comparison, an empty Glock 29 weighs 24.34 ounces or just over a pound and a half – That is almost a third less weight.
Third, a Glock 29 Gen 4 pistol holds 10 rounds with the little magazines made for it but it can also use the 15 round magazines made for the Glock 20. For me to carry 15 rounds in a 1911-ish pistol means I need to move up to a wide grip 2011-style pistol such as the offerings from Rock Island Armory (RIA). Again, it’s big and heavy – 2.5 pounds empty – even heavier than the Desert Eagle.
Fourth, there is an absolutely stunningly large aftermarket parts industry supporting Glock pistols. Now you will have fewer options than the wildly popular model 17 and 19 Glocks but still, you have a ton of sights, triggers, magazine releases, slide stops and what have you to select from,
I originally was going to stop with four but I do need to add in one more – The G29 is small relatively small and far easier to conceal or even stow away than any of my big 1911/2011 pistols. The length of the G29 Gen 4 is just under 7″ with the slide being just over 6.75″. Height with the stock 10 round magazine is just over 4.5″.
The top pistol is my SIG P365 with a 12 round magazine, The middle is the Glock 29 Gen 4 with a Pearce magazine base plate. The bottom is a RIA 52009 Rock Ultra FS HC with its 16 round magazine sitting flush under the big mag well funnel. They are all great pistols but each has a time and a place in terms of use.
All of these points finally pushed me to buy my model 29 gen 4 pistol. I’ll do some more posts about the mods I have done to make it more to my liking – namely the controls, sights and changing magazine base plates so I can more comfortably hold the pistol.
Here’s the G29 with three magazines – on the left is a 10 round magazine with a Pearce replacement base plate that makes the pistol way more comfortable to hold. The middle is a full size G20 15 round magazine with an X-Grip adapter that makes it very nice to hold. Note that one is loaded with Buffalo Bore 220 grain hard cast rounds. The right magazine is the same as the middle but is loaded with 180gr Underwood HPs.
One quick comment – I’ll tell you that I am still training myself on aiming with it. I’ll bring it up and a conciously have to align the sights because my natural point of aim happens with the 1911 grip angle, not the Glock’s. I do plan on trying the new M&P that is out and will see how that goes but for now, my backwoods carry pistol is my G29.
So, I definitely like it but will stop short of saying I love it just due to the grip angle. Now some guys absolutely love their Glocks. My recommendation would be for you to go to the gun store or try a friend’s pistol and see how your natural aim is relative to the sights and decide for yourself. Personally, I can live with it and will train more because the quality of the pistol justifies the extra work on my part.
Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.
