Introducing 1/2" and 3/4" Pull Rings For Our Quick Takedown Pins

When I originally designed our Quick Takedown Pins for the Yugo M85/M92 and then also the Bulgy/Tula Krinks, PSA AK-V and Vepr 12 shotgun, I used my hand size as a gauge for making a pull ring big enough. Guys have asked me repeatedly over the years for smaller pins but I could never find them made well enough that I felt good about carrying them — until now!

This is my AK-V with its quick takedown pin with the standard size 1″ ring installed.

This last time when I placed an order with the machine shop that makes my pins, I asked if they could do custom heavy duty 1/2″ and 3/4″ pull rings from stainless steel with a black oxide finish and they said they could! It cost a fair penny because I needed to order a boatload of each but here they are as an accessory if you want to purchase them … please purchase some 🙂

Here are the three rings side by side. The pins all come with the 1″ standard ring installed.

The 1″ and 3/4″ rings are very beefy. We had to go to smaller gauge wire to do the 1/2″ rings but they should work just fine – it’s really the pin itself that does all the work.

Click here to go to the page with all of the pins and rings if you would like to place an order.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.