I hate bad triggers and the worst triggers I have ever used were on HK MP5 and MP5K weapons. I have no idea of the design intent – maybe a real strong emphasis on avoiding an accidental discharge by having a long spongy pull and then a break somewhere around eight pounds. For someone who likes crisp triggers and a lighter pull, the HK triggers in general can be a rude awakening.
I recently picked up Zenith Firearms ZF5-P, which is a MP5K clone. Zenith Firearms is based in Afton, VA, and make their various rifles and pistols there. They used to import MKE clones from Turkey but severed ties and are actually making them here in the US.
I bought the ZF5-P for a few reasons – First, I got a good deal on it. That always helps. Second, I no longer had any form of an MP5 and kind of wanted to get back in. Third, and the subject of this story, I knew Timney made a well-regarded trigger pack for the MP5/MP5K. Fourth, I had an urge to tinker and needed a test platform.
Now Zenith makes a big deal that they machine their cartridge walls vs. bending sheet metal resulting in a better trigger. I was kind of curious to check that out as well.
For the rest of the article, I’ll just refer to the trigger as an MP5 trigger because the MP5 and MP5K share the same trigger pack. It’s the grip that differs.
The Zenith’s Original Trigger
Well, I was hoping for a good trigger out of the box because of Zenith machining the walls of their trigger pack but to be honest, it was just another MP5 trigger. I bought a new Century MKE AP5-P and its trigger was better than the Zenith’s also. It’s not that the Zenith’s trigger is bad – my point is that the unit I received was no better than any other MP5 trigger I’ve used.
I used a Wheeler “Professional Digital Trigger Pull Gauge” and did 10 pulls of the trigger after lubrication plus I had pulled the trigger maybe two dozen times since I bought it so there was a tad bit of wear in before testing. At any rate, the lightest pull was 7 pounds 5.9oz. The heaviest was 7 pounds 13.5 ounces and the average came in at 7 pounds 11.3 ounces. So, just shy of 7.75 or seven and three quarter pounds. Still long, creepy, spongy … pick the bad discriptor you like.
The Timney MP5 2-Stage Trigger
These triggers are compatible with SEF/ Semi-Auto trigger packs and their style of safety selector levers.
These triggers are NOT compatible with Ambi/Navy/FBI trigger packs or .22 clones, as they are different internally.
Timney provides clear installation instructions in the package plus they have the following video to help with the install.
Folks, that trigger is amazing. Here are pull test results: Minimum pull weight was 3 pounds 2.7 oz. Maximum was 4 pounds 0.1 ounce. The average was 3 pounds 10.3 oz.
I’d call it crisp and clean. Night and day better than the original Zenith trigger.
Range Time
My brother-in-law, nephew and I took the Zenith ZF5-P and a Century MKE AP5-P to the range. For an MP5, the MKE’s trigger is fairly decent but was seriously beaten by the Timney.
Summary
I have never hid my dislike of MP5 triggers – I genuinely don’t like them and the only good things I can say are that they are reliable and you’ll probably never have an accidental discharge.
The Timney trigger ranks as one of the best upgrades I have done to a firearm. If you want a better trigger for your MP5/MP5K, or a clone of them, then get the Timney trigger.
Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.