Hogue Archives

I really like assisted opening folding knives. For example, I routinely carry either a Hogue X5 that my wife and kids bought me for Father’s Day or a ZT 350. I am working all the time and often find myself needing to cut something. In the old days, that meant I would have to fish out my pocket knife, open it with two hands and get back to work. Now, I find the knife, open and cut all with one hand – it’s way more fast and efficient. There’s one catch though – you’ll notice the action can get slower/less efficient with time whether it is spring assisted or not.

There are two likely causes for this – grit/dirt/debris working into the action from your pocket and just plain use as well as a loss of lubrication. This is actually really easy to remedy.

First, if a knife was oiled, I like to use brake cleaner to remove the oil or it will just attract more dust and debris in the future. Brake cleaner cuts oil and grease quickly and does not leave a residue. Now, be careful on real cheap knives. Some plastics do not like brake cleaner but you will not run into a problem with materials like metals, epoxy laminates such as G10, Micarta and so forth. The cheapest way for you to get brake cleaner is from any place that sells car parts – Auto Zone, Pep Boys, O’Reilly, etc.

Second, I blow out the mechanism with compressed air. Since I have an air compressor, doing this at 60-90 PSI is really easy. If you don’t have a compressor, a can of Dust Off or something like that will also work.

Third, I lubricate the blade mechanism with Dupont’s Teflon Dry Film aerosol. This stuff is just what the doctor ordered to lubricate a pocket knife. You see, oil causes dust, sand and other junk you do not want to get stuck in the action. In short, yes, oil helps the blade open and close easily but stuff will stick to it. Instead, use a dry lubricant.

Dry lubricants leave some form of slippery substance behind that is not a liquid. In the case of the Dupont branded product I use, it leaves Teflon behind. So the Teflon is suspended in a liquid that then evaporates away and leaves just the Teflon. I spray it into the action, work the action to get it everywhere and evenly distribute it. I then use a cloth to wipe off the extra.

The above three steps works great for me. The one caution I would give you is to make sure whatever dry lubricant you choose to use really does leave a dry residue. A while back I did some testing and found that the “3-in1” brand product does not leave a truly dry film behind for example.

I do the above for all my flippers and find it really helps. I hope you find it useful as well.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.

Well, my wife sure surprised me this year — she bought me a Hogue X5 pocket knife (SKU 34569) at Smoky Mountain Knife Works when we stopped at the store on Father’s Day. I carried it every day until we returned home on Wednesday. For some reason I did not get more photos of the knife new out of the box. The photos I am showing are all after 2-3 days of being in my pocket with keys walking all over the place.

I must say that I am disappointed that the finish on the frame scratched in a few places but this knife was always intended to be a working blade and not a shelf queen. Standing up to keys is the least of my worries really. It is interesting to note that the top of the blade that was exposed to the keys also shows zero wear relative to the frame. We’ll see how the finish holds up over time.

I’ve been a fan of Hogue knives for a while – especially after a good friend bought one of their fixed blade models. I had a chance to look it over carefully when it was brand new about three years ago and it was very well made. He took it to Alaska and California used it a ton camping and climbing. As for me, I’ve wanted a Hogue but the right opportunity never seemed to pop up until now.

So this is a almost new out of the box review 🙂 Let me start by saying that the X5 family of blades are very well made. I was trying to decide on whether to get another Zero Tolerance (ZT), a Benchmade or the Hogue and finally settled on the Hogue that you see.

The 3.5″ blade is 0.15″ thick and is made from CPM154. This is the CPM manufactured version of Crucible’s 154CM that folks into knives like – it’s relatively easy to sharpen, tough and corrosion resistant. In short, the business end of the knife is made of excellent steel that is 57-59 on the Rockwell scale hard. The blade was cryogenically treated and then finished in a black Cerakote. By the way cryo treatments are fascinating. Click here to read a great write up about them.

The profile is a stunning looking wharncliffe style. Wharncliffe profiles have always caught my eye and there is a bit of history to them. The Viking Seax blades are the first knives I have seen with this profile that is the reverse of most knives. In terms of the name we often use today, the first Lord of Wharncliffe came up with the design in the 1800s and had Joseph Rodgers & Son him some pocket knives.

The blade is a spring-assisted flipper and it opens very smoothly. You can see the round blade release button and a sliding lock behind it. When the lock is engaged, the button can’t be pushed and blade is securely locked open. I like spring-assisted blades by the way as I am always in some weird position trying to open boxes, working on machines, etc. where I can only get one hand free.

The frame of the handle is aluminum with a black G-mascus G10 insert. When closed, the knife is 4.75″ overall yet weighs only 4.66 oz. I really liked the combination of size and light weight. Plus, the frame is remarkably thin so it fits in your pocket nicely and doesn’t feel like a boat anchor.

Now this knife is pretty new to me right now. I haven’t cut anything yet but definitely will be as I have quite a list of stuff to get done and I’ll be cutting open boxes, plastic tubs, etc. I’ll post updates plus I want to compare it to my ZT 350, my favorite EDC blade but I want more mileage on the X5 before I do that.

6/28/2018 Update: Used it to cut 4″ diameter corrugated drain tube and a bunch of boxes. It is very sharp – I didn’t touch the blade up. Still going strong. Like all flippers, when I got dirt in the action it wouldn’t flip until I blew it out. Last comment – it has a real nice feel when I am using it – not awkward at all. I wear XL sized gloves just for reference.

10/6/2018 Update: This blade rocks. It has really held an edge and the finish on the blade has held up remarkably well. Only the handle shows evidence of scuffing so far.

If you are interested in how I lubricate my flipper knives, please click here.