AK-74M Archives

If you ever want to start an argument on the Internet, ask what is the best AK brand you can buy in the US or at least ask what is good a good brand. You’ll get a ton of opinions, hear say and even a few people with real experience will chime in.

Paul Popov is the admin of the AK-47 Group on Facebook and an avid AK hobbyist and industry tracker. He also runs a website called the Kalash Connection where he maintain information about AKs.

The other day he sat down and took the time to create what I will refer to as “Paul’s List” to try and answer that question above:

Current 12-12-20
Question one: What new Ak do I buy?
Current new production mass market AKs that are proven and a safe bet.
Alphabetically
· Arsenal,
· Century imported WASR or Draco
· IWI Galil ACE,
· K-USA KP9p/r,
· M&M Cugir AKs,
· Palmetto State Armory GF3 – up, GF4, 103, AKv, 74 (the only 74 in new prod),
· Riley Defense is hammer forged where it counts, should be ok? (test is not completed, ammo is expensive currently for just putting rounds through one for testing)
· WBP Poland. Still pretty new, hard to say on this one. Maybe ok
· Zastava should be ok, the ones Century imported were hit and miss. New ones have chrome lined barrels (yay and about time) and lets hope better metallurgy than Century imports.
o Atlantic firearms often have decent kit builds to purchase, but are not mfg. new AKs. So do many kit builders, we have a list in announcements along with a list of where you can buy kits from.
o Please let me know if I forgot any.

·Question two: What are good used AKs to buy?
This is a great list Darryn Eugene compiled.
AK variant buyers guide (models and variants G2G)
7.62×39 AKm/47 Variants
· Mitchell Arms Imports, M-90/m-70
· Mitchell Arms Imports, M-72
· Zastava M-92 (inspect due to varying QC)
· Zastava NPAP/OPAP (inspect due to varying QC)
· Cugir/Romarm/Century AES-10B not to be confused with AES-10 (basically a long barreled wasr)
· Cugir/Romarm/Century Sar-1
· Cugir/Romarm/Century Cur-1
· Cugir/Romarm/Century Wum-1 (check for “moon cuts” meaning a dish shaped portion cut out of the rear of the receiver to dissuade the use military stocks.
· Cugir/Romarm/Century WASR-10 variants (only upon inspection)
· Cugir/Romarm/INTRAC Romak-1
· Cugir/Romarm/INTRAC Romak-991 (dimple-less single stack pre WASR import.
· FEG/Hungary/KBI/Kassnar Sa-85 variants post and pre ban.
· FEG/Hungary/TGI Amd-65 builds (not to be confused with Clearview Investments builds)
· Valmet, Literally any of them they’re all excellent.
· Arsenal of Bulgaria/Las Vegas/Legion SLR 107 variants, SAM-7 Variants, SLR 101 Variants, SGL-21 Variants
· BlueRidge/GordonTech/INTRAC SLR100h builds (Hungarian Type3 AK-55 kits on Bulgarian Receivers)
· Norinco/Polytech AK47S series.
· Norinco/Polytech MAK90 series milled and stamped models. (on stamped models identify whether it is slant cut or straight when figuring your price to pay.
· Norinco/Polyech NHM-91
· Norinco/Polytech MAK-91 (20-inch barrel milled receiver rifle, neutered Polyech legend national match).
· Norinco/Polytech Hunters. (great for galil/valmet conversion)
· GSAD/Kengs/Siles Type 56, AK47S
· Molot Vepr 1&2 models (model 2’s being the integrated front sight gas block set up)
· Robinson Arms Molot Vepr Conversions
· IWI Galil Ace series.
· Izhmash Saiga series.
· Intrac Maadi ARM
· Century Maadi MISR SA (avoid MISR 90)
· Intrac Maadi RPM, RML
· Steyr Maadi
5.45×39 AK-74 Variants
· Cugir/Romarm/Century SAR-2
· Cugir/Romarm/INTRAC MK-2
· Cugir/Romarm/Ratmil WUM-2
· Cugir/Romarm/Ratmil CUR-2
· 1st Gen Waffen Werks (identified by Nodak Spud receivers and Bulgarian barrels)
· Arsenal of Bulgaria/Las Vegas SLR 105-104 variants
· Arsenal of Bulgaria/Las Vegas/Legion FIME SGL 31 variants.
· Marcolmar/InRange Ak-74/AKS-74
· Molot Vepr 1&2 Series
· Robinson Arms Molot Vepr Conversions
· Interams Tantal
· Izhmash Saiga Variants
AK-101/5.56 Ak variants
· Romarm/Cugir/Century SAR-3
· Royal Tiger/FB Radom/ Beryl Archer
· Arsenal Of Bulgaria/ Las Vegas SLR 106 series ( research serial number prefixes to identify potential problemed models)
· Izhmash Saiga Variants
· Norinco/Polyech 84S
· Norinco/Polytech NHM-90
· Norinco/Polytech BWK-92
· Zastava/Century M85 (cannot verify quality of m85NP series)
· Mitchell Arms M-90
· Arsenal USA (not to be confused with KVAR) K100 model. (Bulgarian milled receiver assembled with Bulgarian 5.56 barrel on 74 parts.
· Arsenal Of Bulgaria SAM-5
· IMI/IWI Galil and Galil ACE variants
· TENN Galil builds.
· Valmet M72/65 variants.
· Valmet Bullpup. M82? Can’t recall model during time of this list. And yes i know i could use google. Don’t judge me…

So for all you folks new to AKs, take a look a the above. The last AK I bought was an IWI Galil Ace and they are superb.

Also, be sure to check out Paul’s site at: https://thekalashconnection.com

I hope this helps!

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.

PSA AK Webstore Links

Interested in an American made AK? Consider Palmetto State Armory (PSA) as a source. Click on the following links for the associated webstore categories for AK-related rifles, pistols and parts at PSA:

In this episode, Georgiy Gubich operates a 5.45×39 AK-74M built in 2014 on full auto until it fails. You’ll notice he is wearing body armor and for good reason as you’ll learn from the video.

As with his other videos, you definitely want to watch it to hear his observations during the testing and the post mortem review afterwards.

Georgiy is 210 rounds and gives us a great quote “The smell isn’t great”!!

480 rounds into the test he can hear the plastic hissing as the bolt carrier is starting to stick when he is reloading. The plastic is still holding its shape.

When he went ,to reload after round 570, he had so slam the rifle on the ground to get it to cycle. I’ve heard of this but it’s my first time seeing someone really do it and does it smoothly.

Round 587 – the barrel ruptured just in front of the lower handguard retainer. Note, the Russian Ministry of Defense requires the weapon to handle a 180-round burst so they passed that test more than three times over.

Here’s the rupture. Note the cooked plastic.

Now this fascinates me. They are using a polyamide plastic and it held up remarably well. The solid parts closest to the barrel and gas tube were definitely decomposing but you will notice the horizontal ribbing was able to dissapate the heat fast enough to that point to retain its shape and structural integrity. That pattern makes even more sense to me now after seeing this.

Watch the Video!

Summary

Definitely a cool video and I appreciate Kalashnikov Concern making it possible. Georgiy rocks and really like how he changes mags and cycles the action not to mention his running observations during and after the test.

The biggest take-away for me by far is the understanding of why they ribbed the lower handguards – enabling the ribs to cool enough to maintain structural integrity is fascinating. In theory there will be a upper round-count limit causing more heat than can be dissipated but under practical use, they ought to hold up great.

I hope you found it interesting as well.

Please note that all images were extracted from the video and are the property of their respective owner.