AK & Related Rifles, Israel

How A Modern IWI Galil Ace Differs From A Traditional AKM – With Lots Of Photos – Part 2

This is the second part of my review of the differences I saw between a 7.62×51 IWI Galil Ace pistol and a typical AKM-type rifle. [Click here if you would like to open the first post in a separate window.] The following round out my observations:

Railed handguard

AK handguards have evolved from wood to bakelite to elaborate affairs made of polymers or aluminum. In the case of the Ace, no rhyme intended, an aluminum handguard with Picatinny rail is covered by sculpted rail covers.

The handguard is U-shaped with rails at the the 3-, 6- and 9-O’clock positions. The top rail is integral with the gas tube. Note now they have a cut out read for a pressure switch and the rails are open on the middle for wiring. There is one socket screw on each slide to fasten the handguard to the weapon.
The two socket screws thread into a retainer and have thread locker on them. When you look at the top of the rail, you see a small circle indentation on each side and then just a bit further back a rectangular shaped indentation. The screws are on each side. Also, you also get a good view of the front sight .
These are the three rail covers for the handguard. They lock into place and can be released by pushing the visible button at the back. The panel in the middle is the bottom piece and it has a lip that serves to help you index your hand.

So, two differences to note – a unique railed handguard and it is held in position with screws vs. the traditional AK front handguard retainer.

As a personal comment, I stopped buying tri-railed handguards some time ago because they feel too fat for me once you add on rail covers. The Ace handguards aren’t too terrible but they are fat and shorter than I would like. The stock unit will be replaced by one of the excellent handguards from RS Regulate – the GAR-9M-N model to be exact and that will be in a future post.

The Gas tube has tabs and a rail but no locking lever

This is a unique little item right here. The gas tube slides into place via tabs on the unit that mate with slots on the rear base. It does not have a locking lever like an AK does.

The top has a Picatinny rail and the whole unit is locked into place when the dust cover is installed, which pushes the gas tube forward into position. The fitment is so well done that the Picatinny rail is level all the way across the top.

The gas tube goes over the nipple on the front sight block. The relieved tube you see with the screws are where the handguard retainer screws thread in from each side.
This is the gas tube with the rail on top. Note the tabs at the bottom rear and the groove on the rail that mates with the rail from the dust cover.
Here’s another angle – you can see the heat shield on the handguard and the slots on the rear block. We can’t call it a Rear Sight Block (RSB) like we would on an AK because the sight is on the dust cover on the Ace. Here, all it is doing is securing the gas tube.
The fitment of the dust cover and the gas tube are so well done that despite being two separate parts, their two respective rail sections align very nicely.

Integral lower plastic assembly – grip, magazine guide

Part of the revisions from the IMI Galil to the IWI Ace was changing 12 parts from steel to plastic. To be honest, I did not hunt down all 12 and itemize each. What I did readily see was the plastic lower assembly that connects with the steel forged receiver. It has the following:

  • An integral grip that has a hollow storage area
  • Ambidextrous magazine releases
  • An enlarged integral trigger guard
  • A natural hand hold curve just forward of the magazine

Folding Brace Assembly

IWI makes two models of the 7.62×51 pistol – the GAP51 without a brace and the GAP51SB with the brace. I really just needed the GAP51 but went with the GAP51SB because the price was so good from Palmetto State Armory at the time.

What you get with the GAP51SB is an IWI designed integral folder with a 1.25″ diameter pistol tube and an SB Tactical SOB brace. The SOB part makes me smile every time I write it. So, it does give you a well designed fixed length brace and a rock solid folder.

The SB Tactical SOB Brace with the unit locked into position.
That hinge is soooooo cool.
A close up with the brace folded alongside the receiver.
The unit is very compact and functional with the brace closed. Note the IWI logo on the brace but it is definitely an SB unit and the butt end has their logow. SB Tactical OEMs for others as well – meaning they will sell units with the logos of other firms displayed.

Magpul Pmags

No AK ever used Magpul magazines so I think this counts as a difference 🙂 The 7.62×51 Ace uses Magpul’s 7.62×51 PMags. You can get them in a number of sizes as well as a drum if you really want to rock and roll. I bought some 20s, 25s and one of the D50 drums. I’ve not tested the pistol yet but expect it will work great with all of them. Note, both PSA and Gun Mag Warehouse have a variety of mags and drums that will fit.

The 7.62×51 Ace uses readily available Magpul Pmags.

The Manual

I can’t say that I’ve ever read a very good AK manual that has tons of illustrations and covers a lot of topics – operating, cleaning, trouble shooting, and a detailed parts breakdown. The IWI Ace manual really is exceptional. The PDF copy is 88 pages long!

IWI puts all of their operator manuals online – click here to visit their site.

Summary

That’s it for differences I’ve noted thus far. In the next post, I’ll share a number of reviews and videos that I watched before I purchased the unit. By the way, this pistol is amazingly well made. It’s the most impressive firearm in terms of design and execution that I’ve seen in a long time. If you get a deal on one, buy it.

References

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com . Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.