I work a lot with plastics, paracord and webbing. Thus, I need to melt ends, heat small tools/probes to poke holes and what have you. I use lighters for a while but the problem was they didn’t generate very much heat. They were good for searing the end of a paracord but not quickly. Sometimes they quit it heat tools up enough to poke clean holes in webbing.
As usual I did some digging around and came across the Blazer torch as you see in the above photo. This thing is fantastic. I have used it for probably at least two years with no trouble. I bought this in 2014 and after hundreds if not thousands of clicks, the little piezoelectric spark unit is still working just fine – as is everything else. It’s just plain reliable.
It is refilled vs standard butane cartridges. You can save a bundle by buying packages of them off of Amazon versus from the local drug store, grocery store or whatever. Surprisingly the torch does not use a ton of butane fuel at a time. I think it is because the jet is actually fairly small. You can adjust the intensity and the air:fuel ratio depending on what you’re working on. I bought a six-pack of the few will you see in the photo and I think I have only gone through one and a half cans in a couple of years.
The rubber base is removable if you don’t need it and in the next photo you can see a clear picture of the butane fill port.
So if you are looking for a very portable small torch this Blazer has worked great for me and I recommend it so I am listing it below for your reference.
Update: 7/23/2018: It still works great. No problems to report and am still using it regularly for rope and nylon.
Update 11/28/19: The seals went out last month and it will no longer store butane for more than a day or two. Based on reviews on Amazon, I am going to try out a Bernz-O-Matic ST2200T and see how it lasts. I bought the Blazer on 11/29/14 so it almost made it four years,
If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.