The 2026 SHOT Show, held at the Venetian Expo and Caesars Forum in Las Vegas, represents a definitive inflection point for the global small arms industry.¹ While previous years have been defined by incrementalism—shrinking existing platforms into micro-compacts or adding optic cuts to legacy designs—the 2026 exhibition marks a fundamental restructuring of the handgun market. This shift is not merely technological but is driven by a convergence of three powerful pressures: the commoditization of advanced performance features like compensation, the logistical unification of magazine ecosystems, and, most critically, urgent liability-driven engineering shifts in response to the proliferation of illegal conversion devices.⁴

Current intelligence, synthesized from dealer leaks, pre-show press releases, and deep-web industry chatter, indicates that the “micro-compact” trend of the early 2020s has fully matured and is now transitioning into a “Macro-Duty” phase. Manufacturers are no longer racing to build the smallest possible handgun; instead, they are optimizing for “shootability” and sustained firepower within a concealable footprint. The emerging standard for 2026 is the “Compensated Carry” pistol—handguns featuring integral barrel or slide porting as a factory standard rather than an expensive aftermarket modification. This trend, visible in releases from Smith & Wesson, Sig Sauer, and Springfield Armory, signals that recoil mitigation has moved from a competition luxury to a standard safety feature for the concealed carry consumer.⁹

Perhaps the most disruptive development, confirmed by multiple independent sources, is Glock’s bifurcated release strategy. The introduction of a “Gen 6” line alongside a “V Series” (Legacy) line represents a direct strategic response to the regulatory pressure surrounding auto-sears (“switches”).¹¹ This move effectively splits the Glock ecosystem into two distinct architectures for the first time in the company’s history, prioritizing legal insulation alongside performance evolution. Simultaneously, Staccato’s revolutionary move to adopt Glock magazines for its new C3.6 model signals the potential end of the proprietary, high-maintenance 2011 magazine era, drastically lowering the barrier to entry for law enforcement and duty use.¹³

The industry is also witnessing a resurgence of metal-framed striker-fired pistols, with Walther leading a charge to reclaim the weight advantage for recoil management, challenging the polymer orthodoxy that has reigned since the 1980s. Furthermore, the “Personal Defense Weapon” (PDW) category is seeing renewed civilian interest, spearheaded by Palmetto State Armory’s aggressive entry into the 5.7x28mm space, filling the vacuum left by the restricted availability of platforms like the HK MP7.¹⁵

This report provides an exhaustive, analyst-grade examination of the “must-see” pistols for SHOT Show 2026. It categorizes developments by their strategic market impact rather than simple brand delineation, offering stakeholders a comprehensive guide to the shifting tectonic plates of the firearms industry.

Summary Table of Expected Major Announcements (SHOT Show 2026)

Manufacturer	Model	Key Innovation/Disruption	Market Segment	Status
Glock	Gen 6 G17/G19/G45	“Anti-Switch” rear architecture; new optic system; flat-faced trigger; ergonomic overhaul.	Duty / LE	Confirmed 17
Glock	V Series	Legacy commercial line; maintains older architecture for compliance and aftermarket compatibility.	Commercial / Compliance	Leaked 11
Staccato	Compact HD C3.6	Accepts Glock 19 Magazines; 3.6″ Bull Barrel; Alloy frame; External Extractor.	Premium Carry / LE	Confirmed 13
Smith & Wesson	Shield X Carry Comp	“Powerport” integral comp; “Clear Sight Cut” for optics; 15-round micro footprint.	CCW / Micro-Compact	Confirmed 18
Sig Sauer	P320-M.O.D.	Integrated expansion chamber; “Off-Duty” program focus; 21-round capacity.	LE / Duty	Released 19
Springfield	Echelon 4.0 C Comp	Front sight behind port; Variable Interface System (VIS); Serialized Chassis.	Duty / Carry	Confirmed 20
PSA	X5.7 PDW	MP7-style aesthetics; 5.7x28mm; AR control compatibility; sub-$1000 price point.	PDW / Niche	Prototype/Beta 15
Canik	TTI Combat	Taran Tactical Collab; Quick-Attach Comp; Spiral Fluted Barrel; <$1000 MSRP.	Competition / Tactical	Confirmed 21
Daniel Defense	HVM / H9	High Velocity Modular; Striker-fired; low bore axis; recoil buffer system.	Duty / Tactical	Buzz 22
Walther	PDP Steel Frame	Full steel construction for recoil mitigation; Performance Duty Trigger; Duty/Competition crossover.	Competition / Duty	Confirmed 23

1. The Regulatory Pivot: Glock’s Gen 6 and the “Switch” Liability Crisis

The most significant narrative driving the buzz into SHOT Show 2026 is not merely a new product launch but a fundamental shift in the design philosophy of the world’s most ubiquitous handgun manufacturer. For nearly four decades, Glock has operated on a philosophy of iterative refinement—the famous “Perfection” slogan manifesting as slow, conservative evolution from Gen 1 through Gen 5. However, the anticipated Gen 6 release appears to be a radical defensive maneuver against a specific existential threat: the legal and regulatory fallout from the proliferation of illegal auto-sears, colloquially known as “switches”.⁷ This marks a turning point where liability engineering is taking precedence over, or at least standing equal to, performance engineering.

1.1 The Bifurcation Strategy: V Series vs. Gen 6

Industry analysis and dealer chatter strongly suggest that Glock is undertaking a historic bifurcation of its product line. Rather than simply replacing the Gen 5 with the Gen 6, the company is splitting its SKU ecosystem into two distinct branches to address conflicting market needs: legal insulation and legacy compatibility.¹¹

The V Series (Legacy/Compliance Line):

Leaked information indicates the introduction of the “V Series” (Roman numeral V), which will effectively serve as the continuation of the Gen 3/Gen 5 architecture. The branding “V” likely alludes to the established Gen 5 platform but rebranded to distinguish it clearly from the new flagship technology. This line is expected to retain the standard slide cover plate geometry and internal striker housing dimensions. The strategic necessity of the V Series is two-fold. First, it ensures continued sales in restrictive markets like California, where roster requirements often freeze handgun designs in time; changing the internal mechanism of the Gen 6 might reset the testing process, effectively banning the new gun in major markets. Second, it placates the massive aftermarket ecosystem that thrives on the interchangeability of Glock parts. By keeping a “legacy” line, Glock maintains its dominance in the custom builder space while technically offering a “standard” product.11 However, this retention comes with the baggage of the “switch” vulnerability, as the open architecture of the rear slide plate remains accessible to illicit modification.7

The Gen 6 (The New Flagship):

Scheduled for an official release on January 20, 2026 17, the Gen 6 is the true “must-see” item of the show. The “buzz” surrounding this pistol is less about its ballistics and more about its proprietary rear architecture. Reports from investigative outlets like The Trace, corroborated by industry insiders, suggest Glock has re-engineered the striker housing and slide cover plate interface. This new design reportedly incorporates a “polymer block” or a modified hardened steel geometry that physically obstructs the insertion of a drop-in auto-sear.7 The auto-sear works by tripping the trigger bar as the slide closes; the Gen 6 modification likely shields the trigger bar interface from external manipulation via the backplate.

This design change has profound legal implications. By creating a distinct “secure” line, Glock can argue in court—against the rising tide of city and state lawsuits—that they have taken active, tangible steps to mitigate the misuse of their products. The Gen 6 allows them to present a “safe” alternative while the V Series is relegated to a “legacy” status, potentially shifting liability to the consumer who chooses the older, modifiable platform.¹²

1.2 Gen 6 Feature Set: Performance meets Liability

Beyond the liability engineering, the Gen 6 introduces a suite of features that dealers have long demanded to compete with the rising quality of competitors like Canik and Walther. The market has shifted away from the acceptance of “plastic” sights and mediocre triggers, and the Gen 6 attempts to close this gap.

The New Optic System:

Leaks specifically mention a “Gen 6 optic ready system”.17 The current MOS (Modular Optic System) has been criticized for sitting too high and requiring plates that introduce failure points. The Gen 6 system is rumored to allow for the direct mounting of various optic footprints without the need for adapter plates, likely using a multi-pattern screw layout or a deeper, more universal cut. This would lower the optic body, allowing for a better co-witness with standard-height sights and reducing the leverage on the mounting screws.

Ergonomics and Interface:

The press materials leaked ahead of the show detail a “palm swell” and “extended thumb rest” integrated into the frame.17 This is a direct response to the “gas pedal” modifications popular in the aftermarket (e.g., Antimatter Industries, various stippling houses). By integrating a thumb ledge, Glock is acknowledging the modern “thumbs-forward” grip technique used by performance shooters. Furthermore, the grip texture is described as a “double texture,” likely combining aggressive traction in the palm with milder texture on the sides to prevent clothing abrasion during concealed carry.17

The Flat-Faced Trigger:

For years, the first thing a Glock owner did was replace the curved, serrated trigger shoe. The Gen 6 will reportedly ship with a flat-faced trigger as standard.17 While maintaining the Safe Action System (internal safeties), the flat face provides a more consistent finger placement and perceived lighter pull weight, addressing one of the primary complaints of the platform compared to the crisper breaks found on Walther or Canik pistols.

1.3 Market Implication

The Gen 6 is a “defensive innovation.” Glock is not necessarily leading the market in pure performance features; they are protecting their market share from litigation (the switch issue) and aftermarket cannibalization (the trigger and ergonomic upgrades). By internalizing the most common modifications—better texture, flat trigger, thumb ledges—Glock is attempting to recapture the revenue that has been bleeding to companies like Zaffiri Precision, Shadow Systems, and Agency Arms.⁵ The Gen 6 is an admission that “Perfection” required an update.

2. The 2011 Revolution: Staccato Crosses the Rubicon

If Glock is playing defense against liability, Staccato is playing aggressive offense against logistics. The announcement of the Staccato Compact HD C3.6 is arguably the most disruptive product news for the high-end duty and carry market in a decade.⁴ This release signifies the “mainstreaming” of the 2011 platform, moving it from a race-gun thoroughbred to a duty-grade workhorse.

2.1 The Glock Magazine Paradigm Shift

For the entire history of the 2011 platform (the double-stack 1911), the Achilles’ heel has been the magazine. Magazines from the STI era were notoriously expensive, often costing upwards of $100 each, and required “tuning” of the feed lips to run reliably. Even modern Staccato magazines, while vastly improved, remain a proprietary ecosystem that requires significant investment. They are sensitive to debris and abuse in a way that mass-market polymer magazines are not.

The Staccato HD C3.6 breaks this paradigm by utilizing Glock 19 pattern magazines.⁴ The significance of this engineering choice cannot be overstated.

• Logistical Coup for Law Enforcement: The primary barrier to 2011 adoption in law enforcement has been the magazine ecosystem. An agency issuing Glock 17s or 19s has thousands of magazines in inventory. Transitioning to a Staccato previously meant replacing that entire infrastructure. With the C3.6, an agency can authorize the pistol for specialized units (SWAT, protective details) or individual officer purchase without changing their magazine supply chain.⁴ An officer can carry a Staccato C3.6 in their holster and borrow a magazine from a colleague carrying a Glock 19 in a firefight.
• Engineering Challenges: The grip angle of a 1911/2011 (typically ~18 degrees) differs from the Glock grip angle (~22 degrees). Adapting a 2011 frame to feed from a Glock magazine likely required significant geometry adjustments to the feed ramp and grip housing. The fact that Staccato has achieved this while maintaining the 2011 trigger geometry is a major engineering feat.
• Cost of Ownership: By allowing users to use $25 Magpul or OEM Glock magazines instead of $70-$100 proprietary steel magazines, the total cost of ownership for the Staccato platform drops significantly, making it more accessible to the civilian market.

2.2 Technical Specifications and the “Host” Optic System

The C3.6 is not just a magazine adapter; it is a fully realized duty pistol.

• The Bull Barrel: It features a 3.6-inch bull barrel. The extra mass of the bull barrel aids in lockup consistency and delays the unlocking phase slightly, which can help manage the recoil impulse of defensive ammunition.⁴
• External Extractor: The pistol utilizes an “external extractor”.⁴ Traditional 1911s use an internal extractor that relies on spring tension from the steel itself, which can fatigue over time. External extractors, powered by a coil spring, are generally considered more robust and easier to service, a critical feature for a duty weapon.
• Host Optic System: The C3.6 employs Staccato’s “Host” optic system. Unlike many cut slides that eliminate the rear sight or place it on a removable plate (which can lose zero), the Host system places the rear iron sight in front of the optic cut.⁴ This configuration serves two purposes: it protects the front of the optic glass from brass ejection and impact, and it provides a robust, fixed iron sight picture for a lower-1/3 co-witness without the sight hanging off the rear of the slide, which is common on compact optic-ready guns.

The C3.6 effectively signals that Staccato is no longer competing just with Nighthawk or Wilson Combat; they are now competing directly with the high-end SKU’s of Sig Sauer and Glock for general issue contracts.

3. The Era of “Compensated Carry”: OEM Standardization

A dominant trend for SHOT Show 2026 is the rapid migration of compensators from the “Roland Special” aftermarket niche to standard OEM factory configurations. In previous years, a compensated carry gun meant buying a threaded barrel and a screw-on compensator, which increased the length of the pistol, made holster fitment difficult, and often required tuning the recoil spring to function with lower-pressure ammo.

The industry has collectively realized that with modern high-pressure 9mm defensive loads (124gr +P, 147gr), recoil mitigation is a safety and performance feature, not just a competition gimmick. It allows for faster follow-up shots and easier tracking of the red dot sight during rapid fire.

3.1 Smith & Wesson Shield X Carry Comp

Smith & Wesson is aggressively attacking the micro-compact market with the Shield X Carry Comp.⁹

• The Powerport System: Unlike thread-on comps which add length, S&W uses a “12 o’clock” port cut directly into the barrel and slide.⁹ This is an integral system.
• Zero-Footprint Performance: The genius of this design is that the gun fits in standard Shield X holsters. It retains the 3.6″ barrel length profile but uses the gas redirection to flatten the muzzle flip.⁹ The port directs expanding gases upward, pushing the muzzle down.
• Clear Sight Cut: A specific innovation mentioned is the “Clear Sight Cut”—a geometric relief designed to divert the gas blast away from the optic lens.¹⁸ One of the primary downsides of ported barrels is that carbon fouling can obscure the front lens of a red dot sight. S&W’s engineering specifically addresses this, showing a maturation of the technology.

3.2 Sig Sauer P320 M.O.D. and P365 Legion

Sig Sauer continues its strategy of premiumizing its polymer line, moving features from its “Spectre” custom shop into production models.

• P320 M.O.D. (Mobile Off-Duty): This pistol is explicitly marketed toward the “Off-Duty” program, targeting law enforcement officers for their secondary weapon. It features a single-port slide integrated expansion chamber.¹⁹ This differs from barrel porting; the barrel is shorter than the slide, and the gas expands into a chamber built into the slide nose before exiting upwards. This system, popularized by the P365 X-Macro, is generally more reliable with a wider range of ammunition than direct barrel porting because it does not bleed off pressure as early in the dwell time.
• Capacity King: The M.O.D. ships with 21-round magazines standard, pushing the boundaries of what is considered “compact” capacity.¹⁹ This immense firepower capability in a carry-sized grip distinguishes it from the 15-17 round competitors.

3.3 Springfield Echelon 4.0 C Comp

Springfield’s Echelon line, which replaced the XD series, expands with the 4.0 C Comp.

• Sight Placement Innovation: A critical design choice here is placing the front sight behind the compensator port.²⁰ In many earlier compensated designs, the front sight was on the “island” or in front of the port, which often led to the sight becoming blackened by carbon deposits, rendering the tritium or fiber optic useless after a few magazines. By moving it back, Springfield ensures the sight picture remains crisp.
• Serialized Chassis: The Echelon uses a “Central Operating Group” (chassis) similar to the Sig P320, allowing users to swap grip modules (e.g., small, medium, large) without buying a new firearm.²⁰ This modularity, combined with the integral comp, makes it a highly adaptable system for users who might live in jurisdictions where buying multiple serialized frames is difficult.

3.4 Canik TTI Combat

At the intersection of value and performance lies the Canik TTI Combat.²¹

• Celebrity Engineering: Collaborating with Taran Tactical Innovations (TTI), Canik has brought a “John Wick” style race gun to the masses.
• Quick-Attach Compensator: Unlike the integral ports of the S&W or the expansion chamber of the Sig, the Canik uses a proprietary quick-attach compensator that likely fixes to the barrel but is designed for easy removal for cleaning.²¹
• Spiral Fluted Barrel: The barrel features spiral fluting, which reduces weight and increases surface area for cooling, but primarily serves as a debris clearance channel and an aesthetic marker of high-end machining.²¹
• Price Disruption: Expected to retail under $1,000 ²⁶, this pistol offers a feature set (comp, magwell, trigger job, optic cut) that usually costs $2,500+ in the 2011 or custom Glock market.

4. The Heavyweights: Steel Frame Striker Fired & Duty Updates

While plastic has dominated for decades, 2026 sees a counter-movement towards steel. The physics of recoil management favor mass; a heavier gun moves less when fired.

4.1 Walther PDP Steel Frame

Walther is doubling down on weight to win the competition and duty markets. The PDP Steel Frame (Full & Compact) models ²³ are a direct challenge to the CZ Shadow 2 and the Sig P320 AXG.

• Recoil Mitigation via Mass: By moving to a steel frame, Walther adds significant non-reciprocating mass to the pistol. This absorbs the recoil impulse, making the gun shoot flatter and return to target faster.
• Performance Duty Trigger (PDT): Walther continues to dominate the striker-fired trigger conversation. The Steel Frame models feature the PDT, distinct from the Dynamic Performance Trigger (DPT) found in the Pro/Match models. The PDT focuses on a defined wall and short reset suitable for high-stress duty use, whereas the DPT is a lighter, rolling break for competition.²⁷

4.2 Daniel Defense HVM / H9 Evolution

Daniel Defense’s entry into the handgun market with the H9 was met with mixed reliability reviews initially. The HVM (High Velocity Modular?) or updated H9 appears to be their 2026 correction.²²

• Low Bore Axis: The core selling point remains the ultra-low bore axis, similar to the Laugo Alien, which reduces the lever arm of the recoil, significantly reducing muzzle flip.²²
• Recoil Buffer System: The “buzz” suggests they have addressed the initial teething issues with a new recoil-mitigating buffer system designed to smooth out the impulse and improve reliability with a wider variety of ammo.²²
• Specs: With a 4.28″ barrel and 15-round capacity, it sits squarely in the “Glock 19” size bracket but offers the shootability of a much larger gun due to its geometry.²⁸

5. The “MP7 at Home”: PSA’s X5.7 PDW

Palmetto State Armory (PSA) continues to act as the industry’s populist disruptor. The X5.7 is generating immense buzz as a civilian-accessible alternative to the unobtainable HK MP7.¹⁶

5.1 Filling the Void

The HK MP7 is a legendary firearm that has been effectively banned from civilian ownership due to its status as a machine gun and the lack of a semi-auto import version. PSA has recognized this vacuum and built a firearm that captures the aesthetic and ergonomic spirit of the MP7 but operates on a simplified, accessible mechanism.

• The “Rock” DNA: The X5.7 is internally based on the PSA “Rock” 5.7x28mm pistol architecture but scaled up into a chassis system.¹⁶ This keeps costs down compared to developing a new ground-up gas system like the actual MP7.
• Ergonomics and Controls: It mimics the MP7 layout with a folding brace (or stock for SBRs) and a vertical-style grip. Crucially, it accepts standard AR-15 charging handles, a clever nod to user familiarity and customization.¹⁵
• The 5.7x28mm Resurgence: With NATO standardization and more manufacturers (Speer, Fiocchi) producing 5.7 ammo, the caliber has moved from a niche novelty to a viable personal defense round. Its low recoil and high velocity make it ideal for a compact PDW platform like the X5.7.
• Release Date: While shown as a prototype in previous years, dealer updates suggest a Q1 2026 launch is likely, with molds for the grip frame finally complete and endurance testing underway.²⁹

6. Legacy & Revolvers: The Return of the Classics

Amidst the high-tech polymer and steel, there is a distinct trend of nostalgia and “modern retro.”

6.1 HK USP Compact Reissue?

Rumors of a USP Compact 2026 Reissue or update are persistent and credible.³⁰

• The Catalyst: Laser Ammo has released “Recoil Enabled” training versions of the USP Compact for 2026.³² Historically, licensing deals for high-fidelity training simulators often precede or coincide with a marketing push for the live-fire counterpart.
• Market Demand: The market is clamoring for a “modernized” USP—one that retains the legendary reliability and aesthetic but adds a standard Picatinny rail (replacing the proprietary HK rail) and a factory optic cut. If HK delivers a “USP M-Spec,” it would dominate the collector and duty enthusiast market.³³

6.2 The Revolver Renaissance

The wheelgun is not dead; it is evolving.

• Taurus 605 & 327: Taurus continues to innovate in the budget space with the 605 (.357 Mag) and other compact revolvers, focusing on optics-ready options for revolvers (T.O.R.O. line).³⁴
• Colt Cobra: Rumors persist of a 2026 “Classic” lineup from Colt, potentially including refined versions of the Cobra, focusing on the carry market that rejects the complexity of semi-autos.³⁰

7. Future Outlook: The 2026 Market Landscape

The data from SHOT Show 2026 confirms that the “naked” pistol—iron sights only, no rail, no optic cut—is effectively dead in the primary market. Even budget entries now come optic-ready. The market has bifurcated into “Value Disruptors” (Canik, PSA) who offer maximum features for minimum price, and “Premium Integrators” (Staccato, Sig, Glock Gen 6) who offer integrated systems (comps, specialized optics) for a higher tier of professional user.

7.1 The Anti-Liability Standard

Glock’s Gen 6 establishes a new precedent: manufacturers engineering firearms specifically to prevent criminal modification. This is a defensive strategy that may become a future industry standard, pushed by legislation or insurance requirements. If the Gen 6 is successful in court (limiting Glock’s liability for “switch” shootings), expect Smith & Wesson and Sig Sauer to follow with similar “blocked” internal architectures in their next generations.

7.2 Conclusion

For the retailer and industry observer, SHOT Show 2026 is a signal to clear inventory of non-optic-ready, non-compensated handguns. The consumer expectation has shifted. The “Must-See” list—Glock Gen 6, Staccato C3.6, Shield X Carry Comp—defines a new baseline where “custom” features are now the entry price for duty and carry consideration. The standout winner of the show, in terms of pure industry disruption, is the Staccato C3.6. By swallowing their pride and adopting the Glock magazine, Staccato has not only acknowledged the ubiquity of the Glock ecosystem but has also weaponized it to steal market share from the very company that created it. The irony is palpable: in 2026, the best “Glock” on the market might be a Staccato.

---

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@*********ps.com. Please note that for links to other websites, we are only paid if there is an affiliate program such as Avantlink, Impact, Amazon and eBay and only if you purchase something. If you’d like to directly contribute towards our continued reporting, please visit our funding page.

---

Sources Used

1. Shot SHOW 2026: the latest news from the world’s largest gun show on all4shooters.com, accessed January 12, 2026, https://www.all4shooters.com/en/shooting/culture/shot-show-2026-edition-number-dates-and-news/
2. Exhibitor – Industry Day At The Range, accessed January 12, 2026, https://shotshowrangeday.com/exhibitor/
3. NSSF SHOT Show 2026, accessed January 12, 2026, https://shotshow.org/
4. SHOT Show 2026: 7 New Handguns That Are About to Blow Up! – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=bUPSAW17_FY
5. Zaffiri Precision to Unveil Their First Complete Pistols at SHOT 2026 | thefirearmblog.com, accessed January 12, 2026, https://www.thefirearmblog.com/blog/zaffiri-precision-to-unveil-their-first-complete-pistols-at-shot-2026-44824792
6. Shot Show 2026 Leaks — 10 New Guns That Shook The Industry! – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=10GcasWeA9k
7. Glock Could Make It Harder to Outfit Its Pistols With Switches — For a Price – The Trace, accessed January 12, 2026, https://www.thetrace.org/2024/09/glock-switch-lawsuits-pistol-design/
8. Facing Legal Pressure, Glock Revamps Pistols To Prevent Machine Gun Conversions – The Trace, accessed January 12, 2026, https://www.thetrace.org/2025/11/glock-switch-ban-new-pistol-machine-gun/
9. The 7 Must-See Handguns That Just Dropped for SHOT Show 2026 – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=n3rQOsunF9M
10. Review: Century Arms Canik TTI Combat | An Official Journal Of The NRA, accessed January 12, 2026, https://www.americanrifleman.org/content/review-century-arms-canik-tti-combat/
11. Glock Gen 6 vs. Glock V – Reddit, accessed January 12, 2026, https://www.reddit.com/r/Glocks/comments/1pg5hqz/glock_gen_6_vs_glock_v/
12. Glock Unveils Its GEN6, V-Series Pistols | An Official Journal Of The NRA, accessed January 12, 2026, https://www.americanrifleman.org/content/glock-unveils-its-gen6-v-series-pistols/
13. Staccato HD C3.6, accessed January 12, 2026, https://staccato2011.com/products/staccato-hd-c3-6
14. STACCATO HD C3.6: CADRE NEWS – Inside Safariland, accessed January 12, 2026, https://inside.safariland.com/blog/staccato-hd-c3-6-cadre-news/
15. The PSA X5.7 PDW Concept – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=cjqSxLD7k24
16. Palmetto State Touts Concept for X5.7 PDW – Guns.com, accessed January 12, 2026, https://www.guns.com/news/2024/02/05/palmetto-state-touts-concept-x57-pdw
17. GLOCK Reveals the Highly Anticipated 6th Generation of GLOCK Pistols, accessed January 12, 2026, https://us.glock.com/en/Press-Release/News-Page/Gen6-Announcement
18. New Guns And Gear January 2026 – Gun Digest, accessed January 12, 2026, https://gundigest.com/gear-ammo/guns-and-gear-january-2026
19. P320 M.O.D. – Sig Sauer, accessed January 12, 2026, https://www.sigsauer.com/p320-mod.html
20. Echelon™ 4.0C Comp 9mm Handgun – Springfield Armory, accessed January 12, 2026, https://www.springfield-armory.com/echelon-series-handguns/echelon-handguns/echelon-4-compact-comp-9mm-handgun/
21. TTI Combat – Canik USA, accessed January 12, 2026, https://www.canikusa.com/tti-combat
22. SHOT Show 2026 Just Went Insane — 12 New Guns You Need to See – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=hT3ntTbJUsc
23. PDP Steel Frame Full Size 4.5″ – Walther Arms, accessed January 12, 2026, https://waltherarms.com/defense/pdp/steel-frame/pdp-steel-frame-full-size-4-5-in
24. Unbiased: Glock V and Gen6 Details – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=mErb0sxAg80
25. P320-XTEN COMP | Compact and Compensated Design – Sig Sauer, accessed January 12, 2026, https://www.sigsauer.com/p320-xten-carry-comp.html
26. Canik TTI Combat MSRP $949 – Reddit, accessed January 12, 2026, https://www.reddit.com/r/canik/comments/19dx8s4/canik_tti_combat_msrp_949/
27. PDP Steel Frame Compact 4″ – Walther Arms, accessed January 12, 2026, https://waltherarms.com/defense/pdp/steel-frame/pdp-steel-frame-compact-4-in
28. Daniel H9 | Daniel Defense, accessed January 12, 2026, https://danieldefense.com/daniel-h9-handgun.html
29. PSA X5.7 August 2025 Product Launch Update – Palmetto State Armory, accessed January 12, 2026, https://palmettostatearmory.com/blog/psa-x57-august-product-update.html
30. Start of 2026 Line Up : r/guns – Reddit, accessed January 12, 2026, https://www.reddit.com/r/guns/comments/1q9j10k/start_of_2026_line_up/
31. 5 Compact Pistols You MUST See Before You Buy (2026 Edition!) – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=Ib-3xEtcx8M
32. Laser Ammo Launches Recoil Enabled H&K USP Training Pistols | Soldier Systems Daily, accessed January 12, 2026, https://soldiersystems.net/2025/06/18/laser-ammo-launches-recoil-enabled-hk-usp-training-pistols/
33. HK USP 2025 – What New Features Would it Have? (If it existed…) – YouTube, accessed January 12, 2026, https://www.youtube.com/watch?v=sjuXQpnDOCw
34. New Handguns Coming in 2025 | NSSF SHOT Show 2026, accessed January 12, 2026, https://shotshow.org/new-handguns-coming-in-2025/