What sight pusher do I use and Recommend for my Pistols?

A fellow emailed me the other day asking what I use to remove and install sights on my pistols. For those of you wondering what a “sight pusher” is, it is a device that is used to push sights around on a handgun and can be used to install, adjust or remove the sights.

Of course, one size does not fit all so you tend to see pushers that are pistol specific, ones that are designed to with modular shoes, and ones that really shouldn’t have been made in the first place. Yeah, unfortunately I am not joking on that last part. Investigate any pusher before you buy it. Some are sloppy and if the shift or slip, they can put one hell of a scratch in your otherwise nice pistol.

Option #1: For pros who need to support many different pistols, MGW makes the best modular pusher

My good friend, Scott Igert, owns Michigan Gun Exchange and has been changing sights for his customers for many years. Because he has to deal with a variety of pistols and the job must be done right, he swears by his MGW (Maryland Gun Works) Sight-Pro pusher. It’s modular and comes with a 30 degree block for Glock and HK sights. In addition, there are a number of different pusher blocks available for use on other pistols.

Here’s a video from MGW in case you’d like to learn more:

Note, MGW also has a number of pistol model specific tools that work on just the one type of weapon. I’ll include them at the end of the post – they are good and just too many to list.

Option #2: Personally, I use the Wheeler Armorer’s Handgun Sight Tool

I work mainly with Glocks and 1911s and the Wheeler unit has worked just fine for my needs. It costs around $138 and so it’s economical. It’s very well made and hasn’t let me down after maybe a dozen uses in two years – again, I’m not using a pusher practically every day like Scott is.

One important thing to consider is that it does not have the flexibility of the MGW – Wheeler advertises it for use with 1911s, Glocks and M&Ps but I have read of a ton of other pistols being involved so do some searching before you buy. Unlike the MGW’s shoes, With the Wheeler, you can flip a plate in the back and the pusher surface that goes against the sight is either straight or angled depending on what you need.

By removing those two allen screws, you can flip the pusher around to either be the side with angled or straight pushing surfaces.
Here I am installing a suppressor height Trijicon sight on a Glock 34 slide.

The following photos let you see the Wheeler pusher from different angles – click on one to see them full size.

Here’s a video from Wheeler that will show you more about their tool:

Amazon sells the Wheeler Engineering Armorer’s Handgun Sight Tool and that’s where I bought mine. They also have a ton of copycat tools that folow the same color scheme. My experience with knockoffs is that they frequently cut corners that can come back to haunt you such as poor hardening, inferior metal, poor fitment, etc. Be sure to get a Wheeler – they have an online store within Amazon and you can click here to go there,

Summary

You’ll notice that I am recommending two pushers for different audiences. For pros wanting to do this for a living, get the MGW Pro-Sight because of the need to support a variety of pistols. For people like me who have an occasional sight to do with a supported pistol, go with the Wheeler.

I hope this helps you out.

3/12/24 Update: The Wheeler is still working just fine. I have no hesitation recommending it.


Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.