The Magnum Research DE1911G10 10mm Pistol At The Range - It's A Keeper

In the previous post I outlined my first impressions, cleaning and lubrication of the Desert Eagle 5″ 1911 in 10mm (model DE1911G10). I finally had a chance to get to the range and I was so impressed.

It was a nice Spring day as I set up at the Berrien County Sportsmen’s Club’s pistol range. I have always liked the club in general and I like to use their pistol range with metal plates at about 30 feet when I am testing pistols.

The 1 0 yard pistol range wih metal plates is great for testing pistols. I like how I can pull the rope and reset the plates for another round.

For testing,I brought some Ammo, Inc. 180 grain TMC rounds that I had bought in bulk from Palmetto State Armory (PSA). I have to confess that before I bought the ammo I had never heard of “TMC” and had to look it up. TMC stands for Total Metal Case where in the entire lead bullet is covered with copper vs. Full Metal Jacket (FMJ) that leaves the lead at the base of the bullet exposed. TMC is not a magic silver bullet though – there are pros and cons with the process but regardless, it is another option for you to explore when you are looking for range ammo.

I also brought with me a variety of other rounds including S&B 180grain FMJ, Underwood 155 and 200 grain XTP hollow points.

I also brought a number of Wilson Combat and TRP Cobra Mags with me. There are a ton of magazine makers out there and some tend to be better than others. I’ve not had a problem with Wilsom or Cobra 1911 10mm magazines yet.

The left magazine is a 9-round Wilson. The middle magazine is a 9-round Tripp Cobra and the right magazine is a 10-round Cobra.

For safety, I was using my shooting glasses and my Leight Howard electronic hearing protectors.

Looking Over the Pistol

You know, really wasn’t sure if I would like a two tone pistol but it has grown one me. The attention to detail is just remarkable and I wanted to share a few more photos:

Skeleton hammer, nice beaver tail, checkered backstrap. The G10 handle plates are surprisingly comfortable. Note the safety is not ambidextrous but since I am right handed, it really doesn’t bother me.

It’s a sharp looking pistol. I really wasn’t sure how I would like the two tone finish and blue/black handles but it actually looks really good in person. By the way, it worked just fine with all of the Wilson and Tripp Cobra mags I brought.

I kid you not, I was really surprised about how good the trigger pull was.

You can see the bull barrel and lack of a bushing. I really have grown fond of front serrations on slides in general to aid with getting a good grip to rack the slide. A 10mm 1911 tends to have a pretty stout spring so I like the serrations. My RIA 52009 does not and I can tell you it is not as easy for me to rack from the front.

I really like the attention to detail. Notice how the bottom of the G10 slab is beveled, the front of the grip is checkered and the mag well is beveled to aid in loading? That helps you get an idea of the attention to detail.

Shooting the Pistol

I got up to the line, loaded my first mag, racked the action, took aim and squeezed off a round of the Ammo,Inc 180gr TMC. The first thing I noticed was how smooth it cycled – It’s hard to explain what I am thinking when I test a firearm but the first few rounds are all about function – feed, cycling, ejection, etc.

I proceeded to shoot more magazines and noticed there were no failures to feed (FTFs) or failures to eject (FTEs). Matter of fact, after I shot probably 100-150 rounds of all the different 10mm loads I brought and had zero problems. Folks, that is remarkable right there. So often firearms have to wear in and I am kind of used to having a few problems as stuff gets to know each other. Not here – it ran like a top from start to finish.

In terms of accuracy, I was regularly hitting the plates. I’m good enough with a pistol so I’ll just say the pistol was hitting what I was shooting at reliably. I’ll try it from the bench some time and see.

The ergonomics were all solid. I liked the whole package – the trigger, checking, feel of the grip panels and the serations on the front of the slide. Matter of fact, this is the first 1911 in ages where I think I may well leave the G10 grip panels on it vs. swapping out to the Hogue wrap-around models I usually use.

The grip angle of the 1911 has always appealed to me. It enables me to use a natural point of aim meaning I bring my hands up and I am pointing at the target. With a Glock for example, I have to adjust my aim. Now everyone is different — if you are new to pistols, go down to your local gunstore and try different models. Literally see which one feels best for you.

Conclusion

This pistol is probably going to be one that I keep if I were to make a bet. As my friend Scott can tell you, it’s rare that I keep a gun around – I buy it, try it, learn from the design and move on. Every once in a while some design really strikes me and I keep it aroud. That’s the case with this Desert Eagle. They are hard to find right now and I bought mine off Gunbroker. If you find one, I’d definitely recommend it.

Note, I have to buy all of my parts – nothing here was paid for by sponsors, etc. I do make a small amount if you click on an ad and buy something but that is it. You’re getting my real opinion on stuff.

If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.