PTR PDWR In The Leaves

The lighting was right, the leaves were on the ground and it was a great chance to get some new photos of my PTR 105 PDWR pistol.  This big pistol is the interesting brain child of PTR.  It’s essentially a cut down HK 91.

The PTR 105 configuration has a PTR metal handguard installed.  After messing with it some, I decided to install an MP5 handguard as I like the angle on the MP5 handguard more.  This also means I should have just bought the PTR 110 that comes with that handguard.

Now, the only problem is that the MP5 handguard is not as rigid as I would like.  I’ll experiment some with different handguards in the future.

The PTR 195 and 110 are big pistols at 23.5″ overall, 8.5″ barrels and weigh about 8 pounds.  I wanted to install a brace but needed to be mindful of Michigan’s odd 26″ maximum pistol length law.  This isn’t legal advice, but my understanding is that the Michigan State Police say that a pistol with a brace is measured from one end to the other in the minimum operable condition.  So, by installing a side folder, I could have a brace for when I wanted to use it but also had the minimum operable length at 23″.  What you see in the photo is an SB Tactical BTFA folding mechanism, buffer tube and SOB stock.  When open, the weapon measures 32.5″. 

Thanks to the BTFA folding mechanism, I can swing the SOB brace to the left and it locks open.  This keeps the brace out of the way of the ejection port.  You can configure the BTFA to go either left or right.
It definitely has clean lines.
The PDWR definitely likes the PPU battle packs of .308 FMJBT 145 grain ammo.  It works great and is plenty accurate within 100 yards.  I’ll need to try and shoot the PDWR for accuracy some day and see what it can do.

As you can see, the brace is folded open and operating side of the PDWR is nice and clear of any obstructions.

Given the PDWR is chambered in .308 and uses 20 round HK G3 magazines, that is a lot of firepower in a small package.  Overkill?  Sure.  Fun at the range?  Absolutely.


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.