Are you looking for the drill bits and end mill for your Polymer80 pistol build? If so, we have them and a sanding kit!

Folks, we believe we have the right to build our own firearms and have supported the Polymer80 Glock-style frames for a while now. You can build a very reliable and accurate pistol off of their frames

This is my favorite – a PF940v2 was used to make the receiver and it is mated to a Zaffiri Precision custom G34 slide and barrel with a Holosun optic on it. The pistol is accurate and runs like a top.

If you need the 3 or 4mm drill bits that the Polymer80 pistol frames use or the end mill for cleaning up the rails and/or removing the barrel block, we have them.

Given that I like using their frames, I also understood what was needed in terms of the drill bits, end mill and other finishing supplies. We have a number of offerings, but let me highlight our top three.

Our Top Three Selling Tools For Polymer80 Pistols Builders

Click here for the drill bits – they come as a pair.

Click here for the end mill

Note, we also sell a very popular sanding kit that works great for cleaning up the barrel channel so it is nice and smooth with nothing for the recoil spring to catch on. Click here for it.

I hope this helps you out.


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.