Tag Archives: Romainian

First Romy G Build – October 2006!

So I have been taking photos of guns and tools for years and years and year.  I just recently decided to start dipping in and sharing.  I was pretty floored to find this collection of photos of my first build.  It was a 1981 Romanian G pattern AKM, affectionately known to many AK builders as a Romy G.  I’d invested in AK-Builder tools and used them and a big 20 ton hydraulic H-frame press to do the work.  You’ll notice the older AK-Builder flat bending jig is shown.  They worked great and the only drawback I ever noticed, and it was not a big one, was that the flats need to have a positioning hole for a roll pin at the end of each flat.  This definitely was not a big deal but he did evolve the design to not need that later on.

You can also see the old style AK-Builder flats.  They were great to bend but you really needed your act together to do the top rail.  I actually botched this first one and made the rails too narrow.  Because of this, the gap between the upper rails was too wide and the bolt carrier kept popping out.  So, I did a new one and was very careful to get the rails held in place nice and rigid plus I would mill a little and test, mill a little and test to dial the fit in.

I bought a HF mini mill so I could get better looking and more consistent upper rails.  Note the 3″ milling vise.  I bought that from Little Machine Shop and it works great.  I still have both the mini mill and the vise.  My one comment on the mini mill is that it is light duty.  On my bucket list is a full size mill at least with a digital read out (DRO) if not with CNC.  To this day I do a lot of “eye balling” of work and would like to be more precise.  Also, I eventually moved away from oak wood fillers to precise steel blocks at some later date.  The fun thing about writing this up later is that I recall lessons learned and stuff but remembering dates has never been a forte of mine.  As I used the mill more, I really learned to value work holding systems.  Old timers’ advise of “take the time set it up right so the work doesn’t move” proved to be a life lesson I draw on to this day.

Here’s the 1981 parts kit.  Notice how nice and smooth the barrel is machined.  Starting around 1983, the quality started going down hill and you’d see kits where the barrels literally had turning marks going down them that almost looked like threading.  By the way, the “G” series AKs were actually well made semi-auto rifles despite one some detractors would say.  They were made for the Patriotic Guard hence the “G” for Garda.

   

The wood was always so coated with goop, I would spray them down with Bix wood stripper several times until I got down to the wood and would then do finish sanding.  Now on this rifle I used satin polyurethane and over the years moved to boiled linseed oil as the latter was very easy to fix/maintain.  I used a number of reddish brown Minwax stains over the years.  I think that was red oak.

   

I had AK-Builder rivet jigs but I didn’t take photos of them while doing this build for some reason.

Here was the end result.  I would have used a US slant brake, Tapco G2 FCG and that might be a Tapco or generic brown US grip.  I used to get most of my parts from Copes, Centerfire and DPH Arms back in the day.  The finish was Duracoat but I stopped using it after a few years and moved to a combination of parkerizing and Molyresin that held up great.  The AK’s selector lever can wear a strip through a finish real fast.

I kept this around but shot it less and less then when the kits skyrocketed to about $300, I cut the receiver off and sold the kit.  The funds went to other projects but with 20/20 hindsight, I wish I had kept it for nostalgia.   My dad and other family members all had fun shooting this rifle.

 


If you find this post useful, please share the link on Facebook, with your friends, etc. Your support is much appreciated and if you have any feedback, please email me at in**@ro*********.com. Please note that for links to other websites, I may be paid via an affiliate program such as Avantlink, Impact, Amazon and eBay.