Tag Archives: M85

Check out Len’s Yugo M85 With Our Quick Takedown Pin!

Len’s Yugo M85 is looking pretty sweet!

PAP 85 1 PAP 85 2

Here’s what he has to say about his weapon:

Tungsten gray is the cerkote, Sight is a see all {from tandemkross}, key mod rail ,covers, and flash hider {Midwest Industries}, Sling adapter {RFT}, Inforce light, THE Pin Ronin’s grips, dust cover rail Storm Werkz. AR mag adapter  PAP 85, 5.56 Will let you know how it shoots and how the sight works {at least I can see it}

If you are interested, we have a “how to” blog post outlining how to install it

If you would like to buy one, they are available via our online store

What is a Ferrule on Yugo and AK Rifles?

A ferrule is a metal end cap found on some wood grips and handguards to protect the end grain of the wood from being hammered and splitting open.  They were used on different country’s weapons and are usually not interchangeable between countries.  For example, Bulgarian and Yugo ferrules are different.

Near and dear to me are the metal ferrules on Yugoslav / Zastave wood lower handguards.  The following photo shows a M92 lower and the black metal cap is the ferrule.  This ferrule does not fit everything Yugo – just the M70, M85/92, and M77.  The M72 and M76 are unique sizes.

DSC_0312

You have three options when you need a ferrule:  1) Find a used one and this is real hard – try posting in the Marketplace of http://www.akfiles.com and see if they have one.  2) Buy a replica ferrule from us or 3) Simply pry the old ferrule off, put it on the new handguard and the squeeze the tabs shut again with a pair of pliers.

DSC_0320 DSC_0322 DSC_0323

Note if you are putting it on one of our plastic handguards either just set it on it with the ears closed or glue it in place.  Absolutely do not try to squeeze the ears shut — the little metal divots will not dig into our plastic and you risk snapping the handguard tabs.  Again, either slide it on or glue it in place with something like rubber glue or Goop that you can later remove if you want.  Epoxy works too but it is pretty permanent.

For example, I just slid the ferrule on the M70 bulged handguard in the next photo.

I hope this helps!

The following link is to the page on our web store with our various Yugoslav / Zasatav rifle and pistol furniture offerings:

http://shop.roninsgrips.com/Yugoslavian-Furniture_c18.htm


If you find this post useful, please either buy something using one of the links to eBay and Amazon or click one of the AdNow advertisements. EBay and Amazon you need to buy something, AdNow pays for each link you visit – no purchase needed.   With Amazon, if you click on one of our links and then buy something else – even unrelated stuff like clothes, electronics and groceries – we get credit and it would be hugely appreciated.  Doing something like the above will help us fund continued development of the blog.