Not Happy With EBLCL LED Upgrade for My Ryobi Worklight Either

Okay, I ordered the EBLCL CE ROHS FCC PR P13.5S 18V 247 Lumen CREE XP-G2 S4LED upgrade for my 18 volt Ryobi worklight.  To make a long story short, like the Jomitop, it too throws an irregular crescent shaped light that I don’t like.  This unit is sold by a number of vendors on Amazon so buyer beware.

Here’s a photo of the EBLCL unit and the beam it projects:

I’m going to just leave this unit installed and look for a new worklight … I may even just put a replacement bulb in the unit.  I use these things quite a bit and I would rather have a decent wide area of light vs. these oddly shaped beams.

Bottom line, unless you like the shape of the beam shown above, I can’t recommend it.

 


If you find this post useful, please either buy something using one of the links to eBay and Amazon or click one of the AdNow advertisements. EBay and Amazon you need to buy something, AdNow pays for each link you visit – no purchase needed. Doing so will help us fund continued development of the blog.


 

(Visited 20 times, 1 visits today)

Leave a Reply