Installing the CNC Warrior Picatinny Rail Scope Mount for the M92 PAP Pistol

Another great accessory for the Yugo M92 or M85 PAP is the slick picatinny rail kit that CNC Warrior sells.  This thing is a breeze to install and is the best means I have seen for adding an optic to the M92. Because the screws are inserted from the rail side, it is superior to other products that require the screws to come in from underneath the dust cover and risk being hit by the bolt carrier.

All you need is the pistol, a drill and some cutting oil to do the installation.

SAFETY STEP – MAKE SURE THE WEAPON IS UNLOADED.  NEVER ASSUME THAT IT IS – VERIFY IT IS UNLOADED BEFORE YOU BEGIN WORK.

1.  This is the top thick hinge of the M85/M92 dust cover.  See the faint circles?  Those are the spot welds and they are very hard!  Do not drill into them!  The new CNC Warrior mount has four holes and you only need to use two of them.  The reason there is four is so you can pick the best two that get you around/away from the spot welds.  Please note that my rail is only silver because it was a brand new design and they hadn’t applied a finish yet.  If you order one, you will get a black rail!

DSC_0241 DSC_0243

2.  Here you can see my fancy high tech tools.  My Ryobi drill, Tap Magic cutting oil to lubricate the drills and the taps.  Note, you will need to buy a tap handle if you do not have one.  Do not take the short cut of trying to start the tap with a regular socket or open end wrench.  You really want the tap to be firmly held so you can tap the threads at a right angle to the surface of the hinge.  Also, see that little black cylinder?  That is a drill guide that you put into the hole you select to guide the drill bit to the right place on the hinge.  Be sure to use the cutting oil!

DSC_0244 DSC_0245 DSC_0246 DSC_0247 DSC_0248 DSC_0249 DSC_0250 DSC_0255 DSC_0257

3.  As an aside, I blasted the mount and then sprayed on flat black Molyresin and baked it.  You’d never know it came to me unfinished.

DSC_0268 DSC_0269 DSC_0275

4.  After you clean up the chips and are ready to do the final screwing of the mount, be sure to apply Blue Loctite so it does not come loose.

DSC_0276 DSC_0278

That’s it!  The mount is solid and it holds my Vortex Sparc red dot just great.  Note our quick takedown pin to make it easy to remove the cover and get the optic out of the way.

DSC_0332


If you find this post useful, please either buy something using one of the links to eBay and Amazon or click one of the AdNow advertisements.  EBay and Amazon you need to buy something, AdNow pays for each link you visit – no purchase needed.  Doing so will help us fund continued development of the blog.


 

Ronin’s Grips Quick Takedown pin for the M92 dust cover


See larger image

Additional Images:

Vortex Optics Sparc AR Red Dotx 40mm


Features: VIP unconditional Lifetime Warranty, Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission, Nitrogen gas purging with o-rings-seals delivers Fogproof, waterproof performance

Vortex SPARC AR Waterproof Red Dot Sights provide precision, consistency and speedy target acquisition every time. These compact from Vortex have intuitive, rear facing controls for easy access to and instant visibility of adjustments to power and dot brightness. Save battery life with the automatic shut off feature, then automatically return to the last used intensity level when you turn the Vortex SPARC AR Lightweight Red Dot Sight back on. Waterproof, fogproof and shockproof, the Vortex SPARC AR Tactical Red Dot Sight will be your go-to optic for every situation and every rifle.
List Price: $199.00 USD
New From: $198.00 USD In Stock

(Visited 393 times, 1 visits today)

Leave a Reply